Connection to WPA-PSK/WPA2-PSK networks doesn't work with QCA9733 rev 30

Connection to WPA-PSK/WPA2-PSK networks doesn't work with QCA9733 rev 30

[Markus Mälkönen]

Hi,

It seems that I can't connect to any WPA-PSK/WPA2-PSK network with this 
network adapter. But unsecured connections without any WPA or WEP works 
normally.

02:00.0 Network controller [0280]: Qualcomm Atheros QCA9377 802.11ac 
Wireless Network Adapter [168c:0042] (rev 30)

--
Markus Mälkönen





_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

Re: Connection to WPA-PSK/WPA2-PSK networks doesn't work with QCA9733 rev 30

[Valo, Kalle]

Markus Mälkönen <tux-86@mail.ru> writes:

> It seems that I can't connect to any WPA-PSK/WPA2-PSK network with
> this network adapter. But unsecured connections without any WPA or WEP
> works normally.
>
> 02:00.0 Network controller [0280]: Qualcomm Atheros QCA9377 802.11ac
> Wireless Network Adapter [168c:0042] (rev 30)

You are not providing much information so difficult to guess. I haven't
heard anyone else mentioning anything like this, are you sure it really
is a problem with ath10k?

To understand more what is happening we would need to see how you
configure the network, wpasupplicant debug logs and full dmesg output.

-- 
Kalle Valo
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

Re: Connection to WPA-PSK/WPA2-PSK networks doesn't work with QCA9733 rev 30

[Markus Mälkönen]

On pe, marras 4, 2016 at 11:19 , Valo, Kalle <kvalo@qca.qualcomm.com> 
wrote:
> Markus Mälkönen <tux-86@mail.ru> writes:
> 
>>  It seems that I can't connect to any WPA-PSK/WPA2-PSK network with
>>  this network adapter. But unsecured connections without any WPA or 
>> WEP
>>  works normally.
>> 
>>  02:00.0 Network controller [0280]: Qualcomm Atheros QCA9377 802.11ac
>>  Wireless Network Adapter [168c:0042] (rev 30)
> 
> You are not providing much information so difficult to guess. I 
> haven't
> heard anyone else mentioning anything like this, are you sure it 
> really
> is a problem with ath10k?
> 
> To understand more what is happening we would need to see how you
> configure the network, wpasupplicant debug logs and full dmesg output.
> 
> --
> Kalle Valo

It seems that only up-to-date router hardware and/or software are 
supported, not any older router hardware and/or software. Only router 
where are I have successfully created WPA2-PSK connection on linux with 
QCA9377 is my Android 5.1.1 (CM12.1) cellphone, but when I testing same 
with older Android 4.2.2 device, 4-way handshake is always 
unsuccessfully with current ath10k driver despite correct pre-shared 
key. Also I can't create WPA-PSK connection to Android 4.2.2 wifi 
hotpoint. Other wlan chips works correctly, so I think that is ath10k 
related issue, maybe WPA-PSK/WPA2-PSK support for older router device 
is not fully implemented to ath10k driver.

wlp2s0: SME: Trying to authenticate with MAC (SSID='AP' freq=2427 MHz)
wlp2s0: Trying to associate with MAC (SSID='AP' freq=2427 MHz)
wlp2s0: Associated with MAC
wlp2s0: CTRL-EVENT-SUBNET-STATUS-UPDATE status=0
wlp2s0: CTRL-EVENT-DISCONNECTED bssid=MAC reason=3 locally_generated=1
wlp2s0: WPA: 4-Way Handshake failed - pre-shared key may be incorrect
wlp2s0: CTRL-EVENT-SSID-TEMP-DISABLED id=0 ssid="AP" auth_failures=1 
duration=10 reason=WRONG_KEY
wlp2s0: CTRL-EVENT-SSID-REENABLED id=0 ssid="AP"

--
Markus Mälkönen


_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k