From: andriy.shevchenko@linux.intel.com (Andy Shevchenko)
To: linux-snps-arc@lists.infradead.org
Subject: [PATCH] dmaengine: DW DMAC: split pdata to hardware properties and platform quirks
Date: Thu, 20 Oct 2016 13:48:21 +0300 [thread overview]
Message-ID: <1476960501.3693.19.camel@linux.intel.com> (raw)
In-Reply-To: <1473945253-16649-1-git-send-email-Eugeniy.Paltsev@synopsys.com>
On Thu, 2016-09-15@16:14 +0300, Eugeniy Paltsev wrote:
> This patch is to address a proposal by Andy in this thread:
> http://www.spinics.net/lists/dmaengine/msg10754.html
> Split platform data to actual hardware properties, and platform
> quirks.
> Now we able to use quirks and hardware properties separately from
> different sources (pdata, device tree or autoconfig registers)
>
My comments below.
Sorry for delayed answer.
> Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev at synopsys.com>
> ---
> ?drivers/dma/dw/core.c????????????????| 31 +++++++++++++++-----------
> ?drivers/dma/dw/platform.c????????????| 42 +++++++++++++++++++++----
> -----------
> ?include/linux/platform_data/dma-dw.h | 20 +++++++++++------
> ?3 files changed, 57 insertions(+), 36 deletions(-)
>
> diff --git a/drivers/dma/dw/core.c b/drivers/dma/dw/core.c
> index c2c0a61..9352735 100644
> --- a/drivers/dma/dw/core.c
> +++ b/drivers/dma/dw/core.c
> @@ -1451,10 +1451,25 @@ int dw_dma_probe(struct dw_dma_chip *chip)
> ?
> ? dw->regs = chip->regs;
> ? chip->dw = dw;
+ empty line.
> + /* Reassign the platform data pointer */
> + pdata = dw->pdata;
> ?
> ? pm_runtime_get_sync(chip->dev);
> ?
> - if (!chip->pdata) {
> + if ((!chip->pdata) ||
> + ???(chip->pdata && test_bit(QUIRKS_ONLY_USED, &chip->pdata-
I don't think you need atomic test / set of those bits.
> >quirks))) {
> +
> + /*
> + ?* Fill quirks with the default values in case of
> pdata absence
/*
* Multi-line comments should include full sentences
* (punctuation matters).
*/
> + ?*/
> + if (!chip->pdata) {
> + set_bit(QUIRKS_IS_PRIVATE, &pdata->quirks);
> + set_bit(QUIRKS_IS_MEMCPY, &pdata->quirks);
> + set_bit(QUIRKS_IS_NOLLP, &pdata->quirks);
> + } else {
> + pdata->quirks = chip->pdata->quirks;
> + }
> +
> ? dw_params = dma_readl(dw, DW_PARAMS);
> ? dev_dbg(chip->dev, "DW_PARAMS: 0x%08x\n", dw_params);
> ?
> @@ -1464,9 +1479,6 @@ int dw_dma_probe(struct dw_dma_chip *chip)
> ? goto err_pdata;
> ? }
> ?
> - /* Reassign the platform data pointer */
> - pdata = dw->pdata;
> -
> ? /* Get hardware configuration parameters */
> ? pdata->nr_channels = (dw_params >> DW_PARAMS_NR_CHAN
> & 7) + 1;
> ? pdata->nr_masters = (dw_params >> DW_PARAMS_NR_MASTER
> & 3) + 1;
> @@ -1477,8 +1489,6 @@ int dw_dma_probe(struct dw_dma_chip *chip)
> ? pdata->block_size = dma_readl(dw, MAX_BLK_SIZE);
> ?
> ? /* Fill platform data with the default values */
> - pdata->is_private = true;
> - pdata->is_memcpy = true;
> ? pdata->chan_allocation_order =
> CHAN_ALLOCATION_ASCENDING;
> ? pdata->chan_priority = CHAN_PRIORITY_ASCENDING;
> ? } else if (chip->pdata->nr_channels > DW_DMA_MAX_NR_CHANNELS)
> {
> @@ -1486,9 +1496,6 @@ int dw_dma_probe(struct dw_dma_chip *chip)
> ? goto err_pdata;
> ? } else {
> ? memcpy(dw->pdata, chip->pdata, sizeof(*dw->pdata));
> -
> - /* Reassign the platform data pointer */
> - pdata = dw->pdata;
> ? }
> ?
> ? dw->chan = devm_kcalloc(chip->dev, pdata->nr_channels,
> sizeof(*dw->chan),
> @@ -1569,7 +1576,7 @@ int dw_dma_probe(struct dw_dma_chip *chip)
> ? (dwc_params >> DWC_PARAMS_MBLK_EN &
> 0x1) == 0;
> ? } else {
> ? dwc->block_size = pdata->block_size;
> - dwc->nollp = pdata->is_nollp;
> + dwc->nollp = test_bit(QUIRKS_IS_NOLLP,
> &pdata->quirks);
Perhaps you need another patch which actually moves nollp to dwc->flags.
> ? }
> ? }
> ?
> @@ -1582,9 +1589,9 @@ int dw_dma_probe(struct dw_dma_chip *chip)
> ?
> ? /* Set capabilities */
> ? dma_cap_set(DMA_SLAVE, dw->dma.cap_mask);
> - if (pdata->is_private)
> + if (test_bit(QUIRKS_IS_PRIVATE, &pdata->quirks))
> ? dma_cap_set(DMA_PRIVATE, dw->dma.cap_mask);
> - if (pdata->is_memcpy)
> + if (test_bit(QUIRKS_IS_MEMCPY, &pdata->quirks))
> ? dma_cap_set(DMA_MEMCPY, dw->dma.cap_mask);
> ?
> ? dw->dma.dev = chip->dev;
> diff --git a/drivers/dma/dw/platform.c b/drivers/dma/dw/platform.c
> index 5bda0eb..308b977 100644
> --- a/drivers/dma/dw/platform.c
> +++ b/drivers/dma/dw/platform.c
> @@ -12,6 +12,7 @@
> ? * published by the Free Software Foundation.
> ? */
> ?
> +#include <linux/bitops.h>
> ?#include <linux/module.h>
> ?#include <linux/device.h>
> ?#include <linux/clk.h>
> @@ -111,41 +112,48 @@ dw_dma_parse_dt(struct platform_device *pdev)
> ? return NULL;
> ? }
> ?
> - if (of_property_read_u32(np, "dma-masters", &nr_masters))
> - return NULL;
> - if (nr_masters < 1 || nr_masters > DW_DMA_MAX_NR_MASTERS)
> - return NULL;
> -
> - if (of_property_read_u32(np, "dma-channels", &nr_channels))
> - return NULL;
> -
> ? pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
> ? if (!pdata)
> ? return NULL;
> ?
> + set_bit(QUIRKS_ONLY_USED, &pdata->quirks);
> +
> + if (of_property_read_bool(np, "is-private"))
> + set_bit(QUIRKS_IS_PRIVATE, &pdata->quirks);
> +
> + if (of_property_read_bool(np, "is-memcpy"))
> + set_bit(QUIRKS_IS_MEMCPY, &pdata->quirks);
> +
> + if (of_property_read_bool(np, "is-nollp"))
> + set_bit(QUIRKS_IS_NOLLP, &pdata->quirks);
I would suggest to convert to unified device property API first.
> +
> + if (of_property_read_u32(np, "dma-masters", &nr_masters))
> + return pdata;
> + if (nr_masters < 1 || nr_masters > DW_DMA_MAX_NR_MASTERS)
> + return pdata;
> +
> ? pdata->nr_masters = nr_masters;
> - pdata->nr_channels = nr_channels;
> ?
> - if (of_property_read_bool(np, "is_private"))
> - pdata->is_private = true;
> + if (of_property_read_u32(np, "dma-channels", &nr_channels))
> + return pdata;
> ?
> - if (!of_property_read_u32(np, "chan_allocation_order", &tmp))
> + pdata->nr_channels = nr_channels;
> +
> + if (!of_property_read_u32(np, "chan-allocation-order", &tmp))
> ? pdata->chan_allocation_order = (unsigned char)tmp;
> ?
> - if (!of_property_read_u32(np, "chan_priority", &tmp))
> + if (!of_property_read_u32(np, "chan-priority", &tmp))
> ? pdata->chan_priority = tmp;
> ?
> - if (!of_property_read_u32(np, "block_size", &tmp))
> + if (!of_property_read_u32(np, "block-size", &tmp))
> ? pdata->block_size = tmp;
> ?
> ? if (!of_property_read_u32_array(np, "data-width", arr,
> nr_masters)) {
> ? for (tmp = 0; tmp < nr_masters; tmp++)
> ? pdata->data_width[tmp] = arr[tmp];
> - } else if (!of_property_read_u32_array(np, "data_width", arr,
> nr_masters)) {
> - for (tmp = 0; tmp < nr_masters; tmp++)
> - pdata->data_width[tmp] = BIT(arr[tmp] &
> 0x07);
> ? }
> ?
> + clear_bit(QUIRKS_ONLY_USED, &pdata->quirks);
> ? return pdata;
> ?}
> ?#else
> diff --git a/include/linux/platform_data/dma-dw.h
> b/include/linux/platform_data/dma-dw.h
> index 5f0e11e..9cd8199 100644
> --- a/include/linux/platform_data/dma-dw.h
> +++ b/include/linux/platform_data/dma-dw.h
> @@ -37,10 +37,7 @@ struct dw_dma_slave {
> ?/**
> ? * struct dw_dma_platform_data - Controller configuration parameters
> ? * @nr_channels: Number of channels supported by hardware (max 8)
> - * @is_private: The device channels should be marked as private and
> not for
> - * by the general purpose DMA channel allocator.
> - * @is_memcpy: The device channels do support memory-to-memory
> transfers.
> - * @is_nollp: The device channels does not support multi block
> transfers.
> + * @quirks: Bit field with platform quirks
> ? * @chan_allocation_order: Allocate channels starting from 0 or 7
> ? * @chan_priority: Set channel priority increasing from 0 to 7 or 7
> to 0.
> ? * @block_size: Maximum block size supported by the controller
> @@ -50,9 +47,18 @@ struct dw_dma_slave {
> ? */
> ?struct dw_dma_platform_data {
> ? unsigned int nr_channels;
> - bool is_private;
> - bool is_memcpy;
> - bool is_nollp;
> +/* Only use quirks from platform data structure */
> +#define QUIRKS_ONLY_USED 0
> +/*
> + * The device channels should be marked as private and not for
> + * by the general purpose DMA channel allocator.
> + */
> +#define QUIRKS_IS_PRIVATE 1
> +/* The device channels do support memory-to-memory transfers. */
> +#define QUIRKS_IS_MEMCPY 2
> +/* The device channels do not support multi block transfers. */
> +#define QUIRKS_IS_NOLLP 3
You may move descriptions to above struct description field. It will be
consolidated and moreover visible in kernel-doc processed documents.
> + unsigned long quirks;
> ?#define CHAN_ALLOCATION_ASCENDING 0 /* zero to seven */
> ?#define CHAN_ALLOCATION_DESCENDING 1 /* seven to zero
> */
> ? unsigned char chan_allocation_order;
--
Andy Shevchenko <andriy.shevchenko at linux.intel.com>
Intel Finland Oy
WARNING: multiple messages have this Message-ID (diff)
From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
To: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>,
dmaengine@vger.kernel.org
Cc: linux-kernel@vger.kernel.org, vinod.koul@intel.com,
dan.j.williams@intel.com, vireshk@kernel.org,
linux-snps-arc@lists.infradead.org
Subject: Re: [PATCH] dmaengine: DW DMAC: split pdata to hardware properties and platform quirks
Date: Thu, 20 Oct 2016 13:48:21 +0300 [thread overview]
Message-ID: <1476960501.3693.19.camel@linux.intel.com> (raw)
In-Reply-To: <1473945253-16649-1-git-send-email-Eugeniy.Paltsev@synopsys.com>
On Thu, 2016-09-15 at 16:14 +0300, Eugeniy Paltsev wrote:
> This patch is to address a proposal by Andy in this thread:
> http://www.spinics.net/lists/dmaengine/msg10754.html
> Split platform data to actual hardware properties, and platform
> quirks.
> Now we able to use quirks and hardware properties separately from
> different sources (pdata, device tree or autoconfig registers)
>
My comments below.
Sorry for delayed answer.
> Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
> ---
> drivers/dma/dw/core.c | 31 +++++++++++++++-----------
> drivers/dma/dw/platform.c | 42 +++++++++++++++++++++----
> -----------
> include/linux/platform_data/dma-dw.h | 20 +++++++++++------
> 3 files changed, 57 insertions(+), 36 deletions(-)
>
> diff --git a/drivers/dma/dw/core.c b/drivers/dma/dw/core.c
> index c2c0a61..9352735 100644
> --- a/drivers/dma/dw/core.c
> +++ b/drivers/dma/dw/core.c
> @@ -1451,10 +1451,25 @@ int dw_dma_probe(struct dw_dma_chip *chip)
>
> dw->regs = chip->regs;
> chip->dw = dw;
+ empty line.
> + /* Reassign the platform data pointer */
> + pdata = dw->pdata;
>
> pm_runtime_get_sync(chip->dev);
>
> - if (!chip->pdata) {
> + if ((!chip->pdata) ||
> + (chip->pdata && test_bit(QUIRKS_ONLY_USED, &chip->pdata-
I don't think you need atomic test / set of those bits.
> >quirks))) {
> +
> + /*
> + * Fill quirks with the default values in case of
> pdata absence
/*
* Multi-line comments should include full sentences
* (punctuation matters).
*/
> + */
> + if (!chip->pdata) {
> + set_bit(QUIRKS_IS_PRIVATE, &pdata->quirks);
> + set_bit(QUIRKS_IS_MEMCPY, &pdata->quirks);
> + set_bit(QUIRKS_IS_NOLLP, &pdata->quirks);
> + } else {
> + pdata->quirks = chip->pdata->quirks;
> + }
> +
> dw_params = dma_readl(dw, DW_PARAMS);
> dev_dbg(chip->dev, "DW_PARAMS: 0x%08x\n", dw_params);
>
> @@ -1464,9 +1479,6 @@ int dw_dma_probe(struct dw_dma_chip *chip)
> goto err_pdata;
> }
>
> - /* Reassign the platform data pointer */
> - pdata = dw->pdata;
> -
> /* Get hardware configuration parameters */
> pdata->nr_channels = (dw_params >> DW_PARAMS_NR_CHAN
> & 7) + 1;
> pdata->nr_masters = (dw_params >> DW_PARAMS_NR_MASTER
> & 3) + 1;
> @@ -1477,8 +1489,6 @@ int dw_dma_probe(struct dw_dma_chip *chip)
> pdata->block_size = dma_readl(dw, MAX_BLK_SIZE);
>
> /* Fill platform data with the default values */
> - pdata->is_private = true;
> - pdata->is_memcpy = true;
> pdata->chan_allocation_order =
> CHAN_ALLOCATION_ASCENDING;
> pdata->chan_priority = CHAN_PRIORITY_ASCENDING;
> } else if (chip->pdata->nr_channels > DW_DMA_MAX_NR_CHANNELS)
> {
> @@ -1486,9 +1496,6 @@ int dw_dma_probe(struct dw_dma_chip *chip)
> goto err_pdata;
> } else {
> memcpy(dw->pdata, chip->pdata, sizeof(*dw->pdata));
> -
> - /* Reassign the platform data pointer */
> - pdata = dw->pdata;
> }
>
> dw->chan = devm_kcalloc(chip->dev, pdata->nr_channels,
> sizeof(*dw->chan),
> @@ -1569,7 +1576,7 @@ int dw_dma_probe(struct dw_dma_chip *chip)
> (dwc_params >> DWC_PARAMS_MBLK_EN &
> 0x1) == 0;
> } else {
> dwc->block_size = pdata->block_size;
> - dwc->nollp = pdata->is_nollp;
> + dwc->nollp = test_bit(QUIRKS_IS_NOLLP,
> &pdata->quirks);
Perhaps you need another patch which actually moves nollp to dwc->flags.
> }
> }
>
> @@ -1582,9 +1589,9 @@ int dw_dma_probe(struct dw_dma_chip *chip)
>
> /* Set capabilities */
> dma_cap_set(DMA_SLAVE, dw->dma.cap_mask);
> - if (pdata->is_private)
> + if (test_bit(QUIRKS_IS_PRIVATE, &pdata->quirks))
> dma_cap_set(DMA_PRIVATE, dw->dma.cap_mask);
> - if (pdata->is_memcpy)
> + if (test_bit(QUIRKS_IS_MEMCPY, &pdata->quirks))
> dma_cap_set(DMA_MEMCPY, dw->dma.cap_mask);
>
> dw->dma.dev = chip->dev;
> diff --git a/drivers/dma/dw/platform.c b/drivers/dma/dw/platform.c
> index 5bda0eb..308b977 100644
> --- a/drivers/dma/dw/platform.c
> +++ b/drivers/dma/dw/platform.c
> @@ -12,6 +12,7 @@
> * published by the Free Software Foundation.
> */
>
> +#include <linux/bitops.h>
> #include <linux/module.h>
> #include <linux/device.h>
> #include <linux/clk.h>
> @@ -111,41 +112,48 @@ dw_dma_parse_dt(struct platform_device *pdev)
> return NULL;
> }
>
> - if (of_property_read_u32(np, "dma-masters", &nr_masters))
> - return NULL;
> - if (nr_masters < 1 || nr_masters > DW_DMA_MAX_NR_MASTERS)
> - return NULL;
> -
> - if (of_property_read_u32(np, "dma-channels", &nr_channels))
> - return NULL;
> -
> pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
> if (!pdata)
> return NULL;
>
> + set_bit(QUIRKS_ONLY_USED, &pdata->quirks);
> +
> + if (of_property_read_bool(np, "is-private"))
> + set_bit(QUIRKS_IS_PRIVATE, &pdata->quirks);
> +
> + if (of_property_read_bool(np, "is-memcpy"))
> + set_bit(QUIRKS_IS_MEMCPY, &pdata->quirks);
> +
> + if (of_property_read_bool(np, "is-nollp"))
> + set_bit(QUIRKS_IS_NOLLP, &pdata->quirks);
I would suggest to convert to unified device property API first.
> +
> + if (of_property_read_u32(np, "dma-masters", &nr_masters))
> + return pdata;
> + if (nr_masters < 1 || nr_masters > DW_DMA_MAX_NR_MASTERS)
> + return pdata;
> +
> pdata->nr_masters = nr_masters;
> - pdata->nr_channels = nr_channels;
>
> - if (of_property_read_bool(np, "is_private"))
> - pdata->is_private = true;
> + if (of_property_read_u32(np, "dma-channels", &nr_channels))
> + return pdata;
>
> - if (!of_property_read_u32(np, "chan_allocation_order", &tmp))
> + pdata->nr_channels = nr_channels;
> +
> + if (!of_property_read_u32(np, "chan-allocation-order", &tmp))
> pdata->chan_allocation_order = (unsigned char)tmp;
>
> - if (!of_property_read_u32(np, "chan_priority", &tmp))
> + if (!of_property_read_u32(np, "chan-priority", &tmp))
> pdata->chan_priority = tmp;
>
> - if (!of_property_read_u32(np, "block_size", &tmp))
> + if (!of_property_read_u32(np, "block-size", &tmp))
> pdata->block_size = tmp;
>
> if (!of_property_read_u32_array(np, "data-width", arr,
> nr_masters)) {
> for (tmp = 0; tmp < nr_masters; tmp++)
> pdata->data_width[tmp] = arr[tmp];
> - } else if (!of_property_read_u32_array(np, "data_width", arr,
> nr_masters)) {
> - for (tmp = 0; tmp < nr_masters; tmp++)
> - pdata->data_width[tmp] = BIT(arr[tmp] &
> 0x07);
> }
>
> + clear_bit(QUIRKS_ONLY_USED, &pdata->quirks);
> return pdata;
> }
> #else
> diff --git a/include/linux/platform_data/dma-dw.h
> b/include/linux/platform_data/dma-dw.h
> index 5f0e11e..9cd8199 100644
> --- a/include/linux/platform_data/dma-dw.h
> +++ b/include/linux/platform_data/dma-dw.h
> @@ -37,10 +37,7 @@ struct dw_dma_slave {
> /**
> * struct dw_dma_platform_data - Controller configuration parameters
> * @nr_channels: Number of channels supported by hardware (max 8)
> - * @is_private: The device channels should be marked as private and
> not for
> - * by the general purpose DMA channel allocator.
> - * @is_memcpy: The device channels do support memory-to-memory
> transfers.
> - * @is_nollp: The device channels does not support multi block
> transfers.
> + * @quirks: Bit field with platform quirks
> * @chan_allocation_order: Allocate channels starting from 0 or 7
> * @chan_priority: Set channel priority increasing from 0 to 7 or 7
> to 0.
> * @block_size: Maximum block size supported by the controller
> @@ -50,9 +47,18 @@ struct dw_dma_slave {
> */
> struct dw_dma_platform_data {
> unsigned int nr_channels;
> - bool is_private;
> - bool is_memcpy;
> - bool is_nollp;
> +/* Only use quirks from platform data structure */
> +#define QUIRKS_ONLY_USED 0
> +/*
> + * The device channels should be marked as private and not for
> + * by the general purpose DMA channel allocator.
> + */
> +#define QUIRKS_IS_PRIVATE 1
> +/* The device channels do support memory-to-memory transfers. */
> +#define QUIRKS_IS_MEMCPY 2
> +/* The device channels do not support multi block transfers. */
> +#define QUIRKS_IS_NOLLP 3
You may move descriptions to above struct description field. It will be
consolidated and moreover visible in kernel-doc processed documents.
> + unsigned long quirks;
> #define CHAN_ALLOCATION_ASCENDING 0 /* zero to seven */
> #define CHAN_ALLOCATION_DESCENDING 1 /* seven to zero
> */
> unsigned char chan_allocation_order;
--
Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Intel Finland Oy
next prev parent reply other threads:[~2016-10-20 10:48 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-09-15 13:14 [PATCH] dmaengine: DW DMAC: split pdata to hardware properties and platform quirks Eugeniy Paltsev
2016-09-15 13:14 ` Eugeniy Paltsev
2016-09-15 15:04 ` kbuild test robot
2016-09-15 15:04 ` kbuild test robot
2016-10-05 15:14 ` Eugeniy Paltsev
2016-10-05 15:14 ` Eugeniy Paltsev
2016-10-07 11:05 ` Andy Shevchenko
2016-10-07 11:05 ` Andy Shevchenko
2016-10-19 11:43 ` Eugeniy Paltsev
2016-10-19 11:43 ` Eugeniy Paltsev
2016-10-20 10:48 ` Andy Shevchenko [this message]
2016-10-20 10:48 ` Andy Shevchenko
2016-10-20 13:16 ` Eugeniy Paltsev
2016-10-20 13:16 ` Eugeniy Paltsev
2016-10-21 19:00 ` Andy Shevchenko
2016-10-21 19:00 ` Andy Shevchenko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1476960501.3693.19.camel@linux.intel.com \
--to=andriy.shevchenko@linux.intel.com \
--cc=linux-snps-arc@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.