[PATCH v3 3/8] megaraid_sas: Do not fire DCMDs during PCI shutdown/detach

[Kashyap Desai <kashyap.desai@broadcom.com>]

This patch addresses the issue of driver firing DCMDs in PCI
shutdown/detach path irrespective of firmware state.
Driver will check for whether firmware is operational state or not
before firing DCMDs. If firmware is in unrecoverbale
state or does not become operational within specfied time, driver will
skip firing DCMDs.

Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com>
Signed-off-by: Shivasharan Srikanteshwara <shivasharan.srikanteshwara@broadcom.com>
---
 drivers/scsi/megaraid/megaraid_sas_base.c   | 39 +++++++++++++++++++++++++++++
 drivers/scsi/megaraid/megaraid_sas_fusion.c |  9 ++++---
 2 files changed, 45 insertions(+), 3 deletions(-)

diff --git a/drivers/scsi/megaraid/megaraid_sas_base.c b/drivers/scsi/megaraid/megaraid_sas_base.c
index c3efcc7..ba57be6 100644
--- a/drivers/scsi/megaraid/megaraid_sas_base.c
+++ b/drivers/scsi/megaraid/megaraid_sas_base.c
@@ -6248,6 +6248,34 @@ fail_reenable_msix:
 #define megasas_resume	NULL
 #endif
 
+static inline int
+megasas_wait_for_adapter_operational(struct megasas_instance *instance)
+{
+	int wait_time = MEGASAS_RESET_WAIT_TIME * 2;
+	int i;
+
+	if (atomic_read(&instance->adprecovery) == MEGASAS_HW_CRITICAL_ERROR)
+		return 1;
+
+	for (i = 0; i < wait_time; i++) {
+		if (atomic_read(&instance->adprecovery)	== MEGASAS_HBA_OPERATIONAL)
+			break;
+
+		if (!(i % MEGASAS_RESET_NOTICE_INTERVAL))
+			dev_notice(&instance->pdev->dev, "waiting for controller reset to finish\n");
+
+		msleep(1000);
+	}
+
+	if (atomic_read(&instance->adprecovery) != MEGASAS_HBA_OPERATIONAL) {
+		dev_info(&instance->pdev->dev, "%s timed out while waiting for HBA to recover.\n",
+			__func__);
+		return 1;
+	}
+
+	return 0;
+}
+
 /**
  * megasas_detach_one -	PCI hot"un"plug entry point
  * @pdev:		PCI device structure
@@ -6272,9 +6300,14 @@ static void megasas_detach_one(struct pci_dev *pdev)
 	if (instance->fw_crash_state != UNAVAILABLE)
 		megasas_free_host_crash_buffer(instance);
 	scsi_remove_host(instance->host);
+
+	if (megasas_wait_for_adapter_operational(instance))
+		goto skip_firing_dcmds;
+
 	megasas_flush_cache(instance);
 	megasas_shutdown_controller(instance, MR_DCMD_CTRL_SHUTDOWN);
 
+skip_firing_dcmds:
 	/* cancel the delayed work if this work still in queue*/
 	if (instance->ev != NULL) {
 		struct megasas_aen_event *ev = instance->ev;
@@ -6388,8 +6421,14 @@ static void megasas_shutdown(struct pci_dev *pdev)
 	struct megasas_instance *instance = pci_get_drvdata(pdev);
 
 	instance->unload = 1;
+
+	if (megasas_wait_for_adapter_operational(instance))
+		goto skip_firing_dcmds;
+
 	megasas_flush_cache(instance);
 	megasas_shutdown_controller(instance, MR_DCMD_CTRL_SHUTDOWN);
+
+skip_firing_dcmds:
 	instance->instancet->disable_intr(instance);
 	megasas_destroy_irqs(instance);
 
diff --git a/drivers/scsi/megaraid/megaraid_sas_fusion.c b/drivers/scsi/megaraid/megaraid_sas_fusion.c
index 0de7de3..ec626fc 100644
--- a/drivers/scsi/megaraid/megaraid_sas_fusion.c
+++ b/drivers/scsi/megaraid/megaraid_sas_fusion.c
@@ -2463,12 +2463,15 @@ irqreturn_t megasas_isr_fusion(int irq, void *devp)
 			/* Start collecting crash, if DMA bit is done */
 			if ((fw_state == MFI_STATE_FAULT) && dma_state)
 				schedule_work(&instance->crash_init);
-			else if (fw_state == MFI_STATE_FAULT)
-				schedule_work(&instance->work_init);
+			else if (fw_state == MFI_STATE_FAULT) {
+				if (instance->unload == 0)
+					schedule_work(&instance->work_init);
+			}
 		} else if (fw_state == MFI_STATE_FAULT) {
 			dev_warn(&instance->pdev->dev, "Iop2SysDoorbellInt"
 			       "for scsi%d\n", instance->host->host_no);
-			schedule_work(&instance->work_init);
+			if (instance->unload == 0)
+				schedule_work(&instance->work_init);
 		}
 	}
 
-- 
2.4.11