[PATCH v3 4/8] megaraid_sas: Send SYNCHRONIZE_CACHE for non-raid to firmware

[Kashyap Desai <kashyap.desai@broadcom.com>]

Commit- " 02b01e0 [SCSI] megaraid_sas: return sync cache call with success"
added the code in driver to return SYNCHRONIZE_CACHE without sending it to
firmware back in 2007. Earlier MR was mainly for Virtual Disk,
so same code continue for JBOD as well whenever JBOD support was added and it introduced bug that
SYNCHRONIZE_CACHE is not passed to FW for JBOD (non Raid disk).

But our recent analysis indicates that, From Day-1 MR Firmware always
expect Driver to forward SYNCHRONIZE_CACHE for JBOD (non Raid disk) to the
Firmware.
We have fixed this as part of this patch.

CC: stable@vger.kernel.org
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com>
---
 drivers/scsi/megaraid/megaraid_sas_base.c | 13 +++++--------
 1 file changed, 5 insertions(+), 8 deletions(-)

diff --git a/drivers/scsi/megaraid/megaraid_sas_base.c b/drivers/scsi/megaraid/megaraid_sas_base.c
index ba57be6..c98d4f9 100644
--- a/drivers/scsi/megaraid/megaraid_sas_base.c
+++ b/drivers/scsi/megaraid/megaraid_sas_base.c
@@ -1700,16 +1700,13 @@ megasas_queue_command(struct Scsi_Host *shost, struct scsi_cmnd *scmd)
 		goto out_done;
 	}
 
-	switch (scmd->cmnd[0]) {
-	case SYNCHRONIZE_CACHE:
-		/*
-		 * FW takes care of flush cache on its own
-		 * No need to send it down
-		 */
+	/*
+	 * FW takes care of flush cache on its own for Virtual Disk.
+	 * No need to send it down for VD. For JBOD send SYNCHRONIZE_CACHE to FW.
+	 */
+	if ((scmd->cmnd[0] == SYNCHRONIZE_CACHE) && MEGASAS_IS_LOGICAL(scmd)) {
 		scmd->result = DID_OK << 16;
 		goto out_done;
-	default:
-		break;
 	}
 
 	return instance->instancet->build_and_issue_cmd(instance, scmd);
-- 
2.4.11