[PATCH] regulator: arizona-ldo1: Set appropriate value for ramp_delay

[PATCH] regulator: arizona-ldo1: Set appropriate value for ramp_delay

[Charles Keepax]

Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
---
 drivers/regulator/arizona-ldo1.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/regulator/arizona-ldo1.c b/drivers/regulator/arizona-ldo1.c
index f7c88ff..302b57c 100644
--- a/drivers/regulator/arizona-ldo1.c
+++ b/drivers/regulator/arizona-ldo1.c
@@ -130,6 +130,7 @@ static const struct regulator_desc arizona_ldo1_hc = {
 	.uV_step = 50000,
 	.n_voltages = 8,
 	.enable_time = 1500,
+	.ramp_delay = 24000,
 
 	.owner = THIS_MODULE,
 };
@@ -153,6 +154,7 @@ static const struct regulator_desc arizona_ldo1 = {
 	.uV_step = 25000,
 	.n_voltages = 13,
 	.enable_time = 500,
+	.ramp_delay = 24000,
 
 	.owner = THIS_MODULE,
 };
-- 
2.1.4

Applied "regulator: arizona-ldo1: Set appropriate value for ramp_delay" to the regulator tree

[Mark Brown]

The patch

   regulator: arizona-ldo1: Set appropriate value for ramp_delay

has been applied to the regulator tree at

   git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git 

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.  

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

>From 88f0e3a5e6ed674f485d3a09d53c2ead0000378d Mon Sep 17 00:00:00 2001
From: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Date: Fri, 21 Oct 2016 14:47:42 +0100
Subject: [PATCH] regulator: arizona-ldo1: Set appropriate value for ramp_delay

Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
---
 drivers/regulator/arizona-ldo1.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/regulator/arizona-ldo1.c b/drivers/regulator/arizona-ldo1.c
index f7c88ff90c43..302b57cb89c6 100644
--- a/drivers/regulator/arizona-ldo1.c
+++ b/drivers/regulator/arizona-ldo1.c
@@ -130,6 +130,7 @@ static const struct regulator_desc arizona_ldo1_hc = {
 	.uV_step = 50000,
 	.n_voltages = 8,
 	.enable_time = 1500,
+	.ramp_delay = 24000,
 
 	.owner = THIS_MODULE,
 };
@@ -153,6 +154,7 @@ static const struct regulator_desc arizona_ldo1 = {
 	.uV_step = 25000,
 	.n_voltages = 13,
 	.enable_time = 500,
+	.ramp_delay = 24000,
 
 	.owner = THIS_MODULE,
 };
-- 
2.8.1