From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
To: kernel test robot <fengguang.wu@intel.com>,
Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: LKP <lkp@01.org>,
linux-serial@vger.kernel.org, linux-kernel@vger.kernel.org,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
wfg@linux.intel.com
Subject: Re: [serial: 8250_lpss] a13e19cf3d: BUG: kernel hang in boot stage
Date: Sat, 22 Oct 2016 19:40:14 +0300 [thread overview]
Message-ID: <1477154414.6423.34.camel@linux.intel.com> (raw)
In-Reply-To: <1473088503.11323.8.camel@linux.intel.com>
On Mon, 2016-09-05 at 18:15 +0300, Andy Shevchenko wrote:
> +Heikki
>
> On Sat, 2016-09-03 at 16:25 +0800, kernel test robot wrote:
> > Greetings,
> >
> > 0day kernel testing robot got the below dmesg and the first bad
> > commit
> > is
>
> Briefly tested I have hang issues *with* or *without* the mentioned
> commit if under hang you meant no getty available on serial console.
> Otherwise I see output from kernel till
>
> [ 61.625900] raid6test: complete (2429 tests, 0 failures)
> [ 61.671165] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
> [ 61.678004] EDD information not available.
> [ 61.714036] ALSA device list:
> [ 61.717459] #0: Dummy 1
> [ 61.720480] #1: MTPAV on parallel port at 0x378
>
> Attached defconfigs per commit I have tested (also diff between mine
> and
> yours when I did make savedefconfig).
>
> So, may I ask what exact hardware you are using to test this one?
May I ask beloved LKP team what the status of the issue is? Shall we
close it or there is more information coming?
>
> >
> > https://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty.git tty-
> > next
> >
> > commit a13e19cf3dc1080cf8a3a174cefd9199610faed7
> > Author: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
> > AuthorDate: Wed Aug 17 19:20:27 2016 +0300
> > Commit: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> > CommitDate: Wed Aug 31 16:13:30 2016 +0200
> >
> > serial: 8250_lpss: split LPSS driver to separate module
> >
> > The SoCs, such as Intel Braswell, have DesignWare UART IP. Split
> > out the
> > support of such chips to a separate module which also will be
> > used
> > for Intel
> > Quark later.
> >
> > The rationale to have the separate driver to be existing:
> > - Do not contaminate 8250_pci.c anymore with LPSS related quirks
> > - All of them are using same DMA engine and they are Designware
> > IP
> > which means
> > that in the future we might share the code between 8250_dw.c
> > and
> > 8250_lpss.c
> > - It reduces the kernel memory footprint on non-X86 machines
> > where
> > 8250_pci.c
> > is in use
> >
> > Besides the split the driver also has been refactored, in
> > particular a) the DMA
> > and port setup are separate functions, b) the two new structures
> > lpss8250 and
> > lpss8250_board are introduced to keep necessary data instead of
> > pciserial_board, c) DMA parameters are passed to the DMA setup
> > via
> > mentioned
> > custom structure. Most of the changes are done due to the future
> > support of
> > UART DMA on Intel Quark.
> >
> > The Intel Quark UART DMA support is based on bits taking from
> > BSP
> > code
> > published by Intel earlier.
> >
> > The driver does not use any specific power management. PCI core
> > takes care of
> > the default behaviour during suspend and resume.
> >
> > Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.co
> > m>
> > Tested-by: Bryan O'Donoghue <pure.logic@nexus-software.ie>
> > Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> >
> > +-------------------------------+------------+------------+---------
> > --
> > -+
> > >
> > > | 68af490b03 | a13e19cf3d |
> > > 6fe4da5401
> > > >
> >
> > +-------------------------------+------------+------------+---------
> > --
> > -+
> > >
> > > boot_successes | 63 | 0 |
> > > 0 |
> > > boot_failures | 0 | 26 |
> > > 27 |
> > > BUG:kernel_hang_in_boot_stage | 0 | 26 |
> > > 27 |
> >
> > +-------------------------------+------------+------------+---------
> > --
> > -+
> >
> > Booting the kernel.
> >
> > Elapsed time: 500
> > BUG: kernel hang in boot stage
> > Linux version 4.8.0-rc2-00028-ga13e19c #1
> > Command line: root=/dev/ram0 hung_task_panic=1 debug apic=debug
> > sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100
> > net.ifnames=0
> > printk.devkmsg=on panic=-1 softlockup_panic=1 nmi_watchdog=panic
> > oops=panic load_ramdisk=2 prompt_ramdisk=0 systemd.log_level=err
> > ignore_loglevel earlyprintk=ttyS0,115200 console=ttyS0,115200
> > console=tty0 vga=normal rw link=/kbuild-tests/run-queue/kvm/x86_64-
> > randconfig-r0-09031101/linux-devel:devel-spot-
> > 201609030826:a13e19cf3dc1080cf8a3a174cefd9199610faed7:bisect-linux-
> > 0/.vmlinuz-a13e19cf3dc1080cf8a3a174cefd9199610faed7-20160903152912-
> > 8-
> > vp branch=linux-devel/devel-spot-201609030826
> > BOOT_IMAGE=/pkg/linux/x86_64-randconfig-r0-09031101/gcc-
> > 6/a13e19cf3dc1080cf8a3a174cefd9199610faed7/vmlinuz-4.8.0-rc2-00028-
> > ga13e19c drbd.minor_count=8
> >
> >
> > git bisect start 6fe4da54019254083959652e61fab5d7b6d8b16b
> > 3eab887a55424fc2c27553b7bfe32330df83f7b8 --
> > git bisect good 86374892625f368ff0a7d0045bbd10f5005f5095 #
> > 13:00 20+ 0 Merge 'linux-review/Paul-Burton/Partial-MIPS-
> > Malta-DT-conversion/20160903-000153' into devel-spot-201609030826
> > git bisect bad 28b0a3136795a9a1d1abb0331790bbae75e71e03 #
> > 13:14 0- 11 Merge 'renesas/topic/sdr104-v6' into devel-
> > spot-
> > 201609030826
> > git bisect good 2e5ad9bf16a597bcf52ffee14dc5a3dc80e60ae9 #
> > 13:24 22+ 0 Merge 'linux-review/Wang-Nan/perf-report-
> > Recognize-hugetlb-mapping-as-anon-mapping/20160902-220432' into
> > devel-
> > spot-201609030826
> > git bisect bad bedfbf8942db947f2a9be3e3a4e01d8ddf3bdf4e #
> > 13:40 0- 8 Merge 'linux-review/Luca-Ceresoli/rtl8723au-
> > remove-declaration-of-unimplemented-functions/20160902-211231' into
> > devel-spot-201609030826
> > git bisect bad 687a5fb1c4382d1e37d444fdc24f9a0ecb4034a0 #
> > 14:02 0- 10 Merge 'tty/tty-testing' into devel-spot-
> > 201609030826
> > git bisect good 259bbca0cd7b626ab0fc5eb63dfc24b1408e29b4 #
> > 14:13 21+ 0 Merge 'linux-review/Toke-H-iland-J-
> > rgensen/mac80211-Move-reorder-sensitive-TX-handlers-to-after-TXQ-
> > dequeue/20160902-215155' into devel-spot-201609030826
> > git bisect good bf7a791d2c931375ae966adfb0a93eae426c6d7e #
> > 14:26 22+ 0 Merge 'linux-review/Hariprasad-Shenai/cxgb4-
> > Add-
> > support-for-ndo_get_vf_config/20160902-214923' into devel-spot-
> > 201609030826
> > git bisect good 5887ad43ee02a00f17a6132b7fb256dc6865474c #
> > 14:41 22+ 0 tty: serial: fsl_lpuart: Use cyclic DMA for Rx
> > git bisect good 9217a5bf66061c392e461255c5d9d41aac136e58 #
> > 14:50 22+ 0 dmaengine: dw: keep copy of custom slave
> > config
> > in dwc
> > git bisect good 8d17047207d52182ccd55b9529e1c8cc062c07c2 #
> > 15:06 22+ 0 serial: 8250_dma: switch to new
> > dmaengine_terminate_* API
> > git bisect good 68af490b03b40cc31b2cd47899661d87ab9f127d #
> > 15:22 22+ 0 serial: 8250: enable AFE on ports where FIFO
> > is
> > 16 bytes
> > git bisect bad a13e19cf3dc1080cf8a3a174cefd9199610faed7 #
> > 15:36 0- 4 serial: 8250_lpss: split LPSS driver to
> > separate
> > module
> > # first bad commit: [a13e19cf3dc1080cf8a3a174cefd9199610faed7]
> > serial:
> > 8250_lpss: split LPSS driver to separate module
> > git bisect good 68af490b03b40cc31b2cd47899661d87ab9f127d #
> > 15:40 63+ 0 serial: 8250: enable AFE on ports where FIFO
> > is
> > 16 bytes
> > # extra tests on HEAD of linux-devel/devel-spot-201609030826
> > git bisect bad 6fe4da54019254083959652e61fab5d7b6d8b16b #
> > 15:40 0- 27 0day head guard for 'devel-spot-201609030826'
> > # extra tests on tree/branch tty/tty-next
> > git bisect bad d2f5a7311bcaed681a41cb3419b8fe92a7b68bf5 #
> > 16:00 0- 17 dmaengine: hsu: refactor hsu_dma_do_irq() to
> > return int
> > # extra tests on tree/branch linus/master
> > git bisect good 0141af184adc7f6ea9bd2f9631a15704d0806f8b #
> > 16:10 66+ 1 Merge branch 'for-linus' of
> > git://git.kernel.dk/linux-block
> > # extra tests on tree/branch linux-next/master
> > git bisect good 0f98f121e1670eaa2a2fbb675e07d6ba7f0e146f #
> > 16:24 65+ 1 Add linux-next specific files for 20160825
> >
> >
> > ---
> > 0-DAY kernel test infrastructure Open Source
> > Technology
> > Center
> > https://lists.01.org/pipermail/lkp Intel
> > Corporation
>
>
--
Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Intel Finland Oy
WARNING: multiple messages have this Message-ID (diff)
From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
To: lkp@lists.01.org
Subject: Re: [serial: 8250_lpss] a13e19cf3d: BUG: kernel hang in boot stage
Date: Sat, 22 Oct 2016 19:40:14 +0300 [thread overview]
Message-ID: <1477154414.6423.34.camel@linux.intel.com> (raw)
In-Reply-To: <1473088503.11323.8.camel@linux.intel.com>
[-- Attachment #1: Type: text/plain, Size: 9247 bytes --]
On Mon, 2016-09-05 at 18:15 +0300, Andy Shevchenko wrote:
> +Heikki
>
> On Sat, 2016-09-03 at 16:25 +0800, kernel test robot wrote:
> > Greetings,
> >
> > 0day kernel testing robot got the below dmesg and the first bad
> > commit
> > is
>
> Briefly tested I have hang issues *with* or *without* the mentioned
> commit if under hang you meant no getty available on serial console.
> Otherwise I see output from kernel till
>
> [ 61.625900] raid6test: complete (2429 tests, 0 failures)
> [ 61.671165] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
> [ 61.678004] EDD information not available.
> [ 61.714036] ALSA device list:
> [ 61.717459] #0: Dummy 1
> [ 61.720480] #1: MTPAV on parallel port at 0x378
>
> Attached defconfigs per commit I have tested (also diff between mine
> and
> yours when I did make savedefconfig).
>
> So, may I ask what exact hardware you are using to test this one?
May I ask beloved LKP team what the status of the issue is? Shall we
close it or there is more information coming?
>
> >
> > https://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty.git tty-
> > next
> >
> > commit a13e19cf3dc1080cf8a3a174cefd9199610faed7
> > Author: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
> > AuthorDate: Wed Aug 17 19:20:27 2016 +0300
> > Commit: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> > CommitDate: Wed Aug 31 16:13:30 2016 +0200
> >
> > serial: 8250_lpss: split LPSS driver to separate module
> >
> > The SoCs, such as Intel Braswell, have DesignWare UART IP. Split
> > out the
> > support of such chips to a separate module which also will be
> > used
> > for Intel
> > Quark later.
> >
> > The rationale to have the separate driver to be existing:
> > - Do not contaminate 8250_pci.c anymore with LPSS related quirks
> > - All of them are using same DMA engine and they are Designware
> > IP
> > which means
> > that in the future we might share the code between 8250_dw.c
> > and
> > 8250_lpss.c
> > - It reduces the kernel memory footprint on non-X86 machines
> > where
> > 8250_pci.c
> > is in use
> >
> > Besides the split the driver also has been refactored, in
> > particular a) the DMA
> > and port setup are separate functions, b) the two new structures
> > lpss8250 and
> > lpss8250_board are introduced to keep necessary data instead of
> > pciserial_board, c) DMA parameters are passed to the DMA setup
> > via
> > mentioned
> > custom structure. Most of the changes are done due to the future
> > support of
> > UART DMA on Intel Quark.
> >
> > The Intel Quark UART DMA support is based on bits taking from
> > BSP
> > code
> > published by Intel earlier.
> >
> > The driver does not use any specific power management. PCI core
> > takes care of
> > the default behaviour during suspend and resume.
> >
> > Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.co
> > m>
> > Tested-by: Bryan O'Donoghue <pure.logic@nexus-software.ie>
> > Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> >
> > +-------------------------------+------------+------------+---------
> > --
> > -+
> > >
> > > | 68af490b03 | a13e19cf3d |
> > > 6fe4da5401
> > > >
> >
> > +-------------------------------+------------+------------+---------
> > --
> > -+
> > >
> > > boot_successes | 63 | 0 |
> > > 0 |
> > > boot_failures | 0 | 26 |
> > > 27 |
> > > BUG:kernel_hang_in_boot_stage | 0 | 26 |
> > > 27 |
> >
> > +-------------------------------+------------+------------+---------
> > --
> > -+
> >
> > Booting the kernel.
> >
> > Elapsed time: 500
> > BUG: kernel hang in boot stage
> > Linux version 4.8.0-rc2-00028-ga13e19c #1
> > Command line: root=/dev/ram0 hung_task_panic=1 debug apic=debug
> > sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100
> > net.ifnames=0
> > printk.devkmsg=on panic=-1 softlockup_panic=1 nmi_watchdog=panic
> > oops=panic load_ramdisk=2 prompt_ramdisk=0 systemd.log_level=err
> > ignore_loglevel earlyprintk=ttyS0,115200 console=ttyS0,115200
> > console=tty0 vga=normal rw link=/kbuild-tests/run-queue/kvm/x86_64-
> > randconfig-r0-09031101/linux-devel:devel-spot-
> > 201609030826:a13e19cf3dc1080cf8a3a174cefd9199610faed7:bisect-linux-
> > 0/.vmlinuz-a13e19cf3dc1080cf8a3a174cefd9199610faed7-20160903152912-
> > 8-
> > vp branch=linux-devel/devel-spot-201609030826
> > BOOT_IMAGE=/pkg/linux/x86_64-randconfig-r0-09031101/gcc-
> > 6/a13e19cf3dc1080cf8a3a174cefd9199610faed7/vmlinuz-4.8.0-rc2-00028-
> > ga13e19c drbd.minor_count=8
> >
> >
> > git bisect start 6fe4da54019254083959652e61fab5d7b6d8b16b
> > 3eab887a55424fc2c27553b7bfe32330df83f7b8 --
> > git bisect good 86374892625f368ff0a7d0045bbd10f5005f5095 #
> > 13:00 20+ 0 Merge 'linux-review/Paul-Burton/Partial-MIPS-
> > Malta-DT-conversion/20160903-000153' into devel-spot-201609030826
> > git bisect bad 28b0a3136795a9a1d1abb0331790bbae75e71e03 #
> > 13:14 0- 11 Merge 'renesas/topic/sdr104-v6' into devel-
> > spot-
> > 201609030826
> > git bisect good 2e5ad9bf16a597bcf52ffee14dc5a3dc80e60ae9 #
> > 13:24 22+ 0 Merge 'linux-review/Wang-Nan/perf-report-
> > Recognize-hugetlb-mapping-as-anon-mapping/20160902-220432' into
> > devel-
> > spot-201609030826
> > git bisect bad bedfbf8942db947f2a9be3e3a4e01d8ddf3bdf4e #
> > 13:40 0- 8 Merge 'linux-review/Luca-Ceresoli/rtl8723au-
> > remove-declaration-of-unimplemented-functions/20160902-211231' into
> > devel-spot-201609030826
> > git bisect bad 687a5fb1c4382d1e37d444fdc24f9a0ecb4034a0 #
> > 14:02 0- 10 Merge 'tty/tty-testing' into devel-spot-
> > 201609030826
> > git bisect good 259bbca0cd7b626ab0fc5eb63dfc24b1408e29b4 #
> > 14:13 21+ 0 Merge 'linux-review/Toke-H-iland-J-
> > rgensen/mac80211-Move-reorder-sensitive-TX-handlers-to-after-TXQ-
> > dequeue/20160902-215155' into devel-spot-201609030826
> > git bisect good bf7a791d2c931375ae966adfb0a93eae426c6d7e #
> > 14:26 22+ 0 Merge 'linux-review/Hariprasad-Shenai/cxgb4-
> > Add-
> > support-for-ndo_get_vf_config/20160902-214923' into devel-spot-
> > 201609030826
> > git bisect good 5887ad43ee02a00f17a6132b7fb256dc6865474c #
> > 14:41 22+ 0 tty: serial: fsl_lpuart: Use cyclic DMA for Rx
> > git bisect good 9217a5bf66061c392e461255c5d9d41aac136e58 #
> > 14:50 22+ 0 dmaengine: dw: keep copy of custom slave
> > config
> > in dwc
> > git bisect good 8d17047207d52182ccd55b9529e1c8cc062c07c2 #
> > 15:06 22+ 0 serial: 8250_dma: switch to new
> > dmaengine_terminate_* API
> > git bisect good 68af490b03b40cc31b2cd47899661d87ab9f127d #
> > 15:22 22+ 0 serial: 8250: enable AFE on ports where FIFO
> > is
> > 16 bytes
> > git bisect bad a13e19cf3dc1080cf8a3a174cefd9199610faed7 #
> > 15:36 0- 4 serial: 8250_lpss: split LPSS driver to
> > separate
> > module
> > # first bad commit: [a13e19cf3dc1080cf8a3a174cefd9199610faed7]
> > serial:
> > 8250_lpss: split LPSS driver to separate module
> > git bisect good 68af490b03b40cc31b2cd47899661d87ab9f127d #
> > 15:40 63+ 0 serial: 8250: enable AFE on ports where FIFO
> > is
> > 16 bytes
> > # extra tests on HEAD of linux-devel/devel-spot-201609030826
> > git bisect bad 6fe4da54019254083959652e61fab5d7b6d8b16b #
> > 15:40 0- 27 0day head guard for 'devel-spot-201609030826'
> > # extra tests on tree/branch tty/tty-next
> > git bisect bad d2f5a7311bcaed681a41cb3419b8fe92a7b68bf5 #
> > 16:00 0- 17 dmaengine: hsu: refactor hsu_dma_do_irq() to
> > return int
> > # extra tests on tree/branch linus/master
> > git bisect good 0141af184adc7f6ea9bd2f9631a15704d0806f8b #
> > 16:10 66+ 1 Merge branch 'for-linus' of
> > git://git.kernel.dk/linux-block
> > # extra tests on tree/branch linux-next/master
> > git bisect good 0f98f121e1670eaa2a2fbb675e07d6ba7f0e146f #
> > 16:24 65+ 1 Add linux-next specific files for 20160825
> >
> >
> > ---
> > 0-DAY kernel test infrastructure Open Source
> > Technology
> > Center
> > https://lists.01.org/pipermail/lkp Intel
> > Corporation
>
>
--
Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Intel Finland Oy
next prev parent reply other threads:[~2016-10-22 16:40 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-09-03 8:25 [serial: 8250_lpss] a13e19cf3d: BUG: kernel hang in boot stage kernel test robot
2016-09-03 8:25 ` kernel test robot
[not found] ` <1473088503.11323.8.camel@linux.intel.com>
2016-10-22 16:40 ` Andy Shevchenko [this message]
2016-10-22 16:40 ` Andy Shevchenko
2016-10-24 2:13 ` Fengguang Wu
2016-10-24 2:13 ` Fengguang Wu
2016-10-24 9:18 ` Andy Shevchenko
2016-10-24 9:18 ` Andy Shevchenko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1477154414.6423.34.camel@linux.intel.com \
--to=andriy.shevchenko@linux.intel.com \
--cc=fengguang.wu@intel.com \
--cc=gregkh@linuxfoundation.org \
--cc=heikki.krogerus@linux.intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-serial@vger.kernel.org \
--cc=lkp@01.org \
--cc=wfg@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.