All of lore.kernel.org
 help / color / mirror / Atom feed
From: david@lechnology.com (David Lechner)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v6 0/5] da8xx USB PHY platform devices and clocks
Date: Tue, 25 Oct 2016 22:06:46 -0500	[thread overview]
Message-ID: <1477451211-31979-1-git-send-email-david@lechnology.com> (raw)

It has been almost 6 months since the v5 submission, so here is a recap:

* There were a number of phy and usb dependencies that were submitted
  separately.
* The last of the usb dependencies has finally made its way into linux-next
  today.
* This series was recently included in "[PATCH/RFT v2 00/17] Add DT support for
  ohci-da8xx". I am breaking it back out again as a standalone series.


v6 changes:

* Combine "ARM: davinci: da8xx: Enable the usb20 "per" clk on phy_clk_enable"
  from the "[PATCH/RFT v2 00/17] Add DT support for ohci-da8xx" series with
  the "ARM: davinci: da8xx: add usb phy clocks" patch in this series.
* Change the syscon and da8xx-usb-phy device ids to -1.

v5 changes: renamed "usbphy" to "usb_phy" or "usb-phy" as appropriate

v4 changes: fix strict checkpatch complaint

v3 changes:

* Fixed the davinci device tree declarations to use the preferred DT address
  convention so that the items I have added can be correct too.
* Moved that davinci clock init so that we don't have to call ioremap in the
  clock mux functions.
* Added a new "syscon" device for the CFGCHIP registers. This is used by the
  USB PHY driver and will be used in the future in common clock framework
  drivers.
* USB clocks are moved to a common file instead of having duplicated code.
* PHY driver uses syscon for CFGCHIP registers instead of using them directly.

David Lechner (5):
  ARM: davinci: da8xx: add usb phy clocks
  ARM: davinci: da8xx: Add CFGCHIP syscon platform declaration.
  ARM: davinci: da8xx: Add USB PHY platform declaration
  ARM: DTS: da850: Add cfgchip syscon node
  ARM: DTS: da850: Add usb phy node

 arch/arm/boot/dts/da850.dtsi                |   9 ++
 arch/arm/mach-davinci/board-da830-evm.c     |  52 +++---
 arch/arm/mach-davinci/board-da850-evm.c     |   4 +
 arch/arm/mach-davinci/board-mityomapl138.c  |   4 +
 arch/arm/mach-davinci/board-omapl138-hawk.c |  23 ++-
 arch/arm/mach-davinci/devices-da8xx.c       |  28 ++++
 arch/arm/mach-davinci/include/mach/da8xx.h  |   6 +
 arch/arm/mach-davinci/usb-da8xx.c           | 243 +++++++++++++++++++++++++++-
 8 files changed, 327 insertions(+), 42 deletions(-)

-- 
2.7.4

WARNING: multiple messages have this Message-ID (diff)
From: David Lechner <david-nq/r/kbU++upp/zk7JDF2g@public.gmane.org>
To: Sekhar Nori <nsekhar-l0cyMroinI0@public.gmane.org>,
	Kevin Hilman <khilman-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
	Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
	Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>
Cc: David Lechner <david-nq/r/kbU++upp/zk7JDF2g@public.gmane.org>,
	Axel Haslam <ahaslam-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>,
	Sergei Shtylyov
	<sergei.shtylyov-M4DtvfQ/ZS1MRgGoP+s0PdBPR1lH4CV8@public.gmane.org>,
	devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: [PATCH v6 0/5] da8xx USB PHY platform devices and clocks
Date: Tue, 25 Oct 2016 22:06:46 -0500	[thread overview]
Message-ID: <1477451211-31979-1-git-send-email-david@lechnology.com> (raw)

It has been almost 6 months since the v5 submission, so here is a recap:

* There were a number of phy and usb dependencies that were submitted
  separately.
* The last of the usb dependencies has finally made its way into linux-next
  today.
* This series was recently included in "[PATCH/RFT v2 00/17] Add DT support for
  ohci-da8xx". I am breaking it back out again as a standalone series.


v6 changes:

* Combine "ARM: davinci: da8xx: Enable the usb20 "per" clk on phy_clk_enable"
  from the "[PATCH/RFT v2 00/17] Add DT support for ohci-da8xx" series with
  the "ARM: davinci: da8xx: add usb phy clocks" patch in this series.
* Change the syscon and da8xx-usb-phy device ids to -1.

v5 changes: renamed "usbphy" to "usb_phy" or "usb-phy" as appropriate

v4 changes: fix strict checkpatch complaint

v3 changes:

* Fixed the davinci device tree declarations to use the preferred DT address
  convention so that the items I have added can be correct too.
* Moved that davinci clock init so that we don't have to call ioremap in the
  clock mux functions.
* Added a new "syscon" device for the CFGCHIP registers. This is used by the
  USB PHY driver and will be used in the future in common clock framework
  drivers.
* USB clocks are moved to a common file instead of having duplicated code.
* PHY driver uses syscon for CFGCHIP registers instead of using them directly.

David Lechner (5):
  ARM: davinci: da8xx: add usb phy clocks
  ARM: davinci: da8xx: Add CFGCHIP syscon platform declaration.
  ARM: davinci: da8xx: Add USB PHY platform declaration
  ARM: DTS: da850: Add cfgchip syscon node
  ARM: DTS: da850: Add usb phy node

 arch/arm/boot/dts/da850.dtsi                |   9 ++
 arch/arm/mach-davinci/board-da830-evm.c     |  52 +++---
 arch/arm/mach-davinci/board-da850-evm.c     |   4 +
 arch/arm/mach-davinci/board-mityomapl138.c  |   4 +
 arch/arm/mach-davinci/board-omapl138-hawk.c |  23 ++-
 arch/arm/mach-davinci/devices-da8xx.c       |  28 ++++
 arch/arm/mach-davinci/include/mach/da8xx.h  |   6 +
 arch/arm/mach-davinci/usb-da8xx.c           | 243 +++++++++++++++++++++++++++-
 8 files changed, 327 insertions(+), 42 deletions(-)

-- 
2.7.4

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

WARNING: multiple messages have this Message-ID (diff)
From: David Lechner <david@lechnology.com>
To: Sekhar Nori <nsekhar@ti.com>, Kevin Hilman <khilman@kernel.org>,
	Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>
Cc: David Lechner <david@lechnology.com>,
	Axel Haslam <ahaslam@baylibre.com>,
	Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>,
	devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH v6 0/5] da8xx USB PHY platform devices and clocks
Date: Tue, 25 Oct 2016 22:06:46 -0500	[thread overview]
Message-ID: <1477451211-31979-1-git-send-email-david@lechnology.com> (raw)

It has been almost 6 months since the v5 submission, so here is a recap:

* There were a number of phy and usb dependencies that were submitted
  separately.
* The last of the usb dependencies has finally made its way into linux-next
  today.
* This series was recently included in "[PATCH/RFT v2 00/17] Add DT support for
  ohci-da8xx". I am breaking it back out again as a standalone series.


v6 changes:

* Combine "ARM: davinci: da8xx: Enable the usb20 "per" clk on phy_clk_enable"
  from the "[PATCH/RFT v2 00/17] Add DT support for ohci-da8xx" series with
  the "ARM: davinci: da8xx: add usb phy clocks" patch in this series.
* Change the syscon and da8xx-usb-phy device ids to -1.

v5 changes: renamed "usbphy" to "usb_phy" or "usb-phy" as appropriate

v4 changes: fix strict checkpatch complaint

v3 changes:

* Fixed the davinci device tree declarations to use the preferred DT address
  convention so that the items I have added can be correct too.
* Moved that davinci clock init so that we don't have to call ioremap in the
  clock mux functions.
* Added a new "syscon" device for the CFGCHIP registers. This is used by the
  USB PHY driver and will be used in the future in common clock framework
  drivers.
* USB clocks are moved to a common file instead of having duplicated code.
* PHY driver uses syscon for CFGCHIP registers instead of using them directly.

David Lechner (5):
  ARM: davinci: da8xx: add usb phy clocks
  ARM: davinci: da8xx: Add CFGCHIP syscon platform declaration.
  ARM: davinci: da8xx: Add USB PHY platform declaration
  ARM: DTS: da850: Add cfgchip syscon node
  ARM: DTS: da850: Add usb phy node

 arch/arm/boot/dts/da850.dtsi                |   9 ++
 arch/arm/mach-davinci/board-da830-evm.c     |  52 +++---
 arch/arm/mach-davinci/board-da850-evm.c     |   4 +
 arch/arm/mach-davinci/board-mityomapl138.c  |   4 +
 arch/arm/mach-davinci/board-omapl138-hawk.c |  23 ++-
 arch/arm/mach-davinci/devices-da8xx.c       |  28 ++++
 arch/arm/mach-davinci/include/mach/da8xx.h  |   6 +
 arch/arm/mach-davinci/usb-da8xx.c           | 243 +++++++++++++++++++++++++++-
 8 files changed, 327 insertions(+), 42 deletions(-)

-- 
2.7.4

             reply	other threads:[~2016-10-26  3:06 UTC|newest]

Thread overview: 51+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-10-26  3:06 David Lechner [this message]
2016-10-26  3:06 ` [PATCH v6 0/5] da8xx USB PHY platform devices and clocks David Lechner
2016-10-26  3:06 ` David Lechner
2016-10-26  3:06 ` [PATCH v6 1/5] ARM: davinci: da8xx: add usb phy clocks David Lechner
2016-10-26  3:06   ` David Lechner
2016-10-26  7:59   ` Sekhar Nori
2016-10-26  7:59     ` Sekhar Nori
2016-10-26  7:59     ` Sekhar Nori
2016-10-26 16:37     ` David Lechner
2016-10-26 16:37       ` David Lechner
2016-10-26 16:37       ` David Lechner
2016-10-26 17:13       ` Sekhar Nori
2016-10-26 17:13         ` Sekhar Nori
2016-10-26 17:13         ` Sekhar Nori
2016-10-26  9:24   ` Sekhar Nori
2016-10-26  9:24     ` Sekhar Nori
2016-10-26  9:24     ` Sekhar Nori
2016-10-26  3:06 ` [PATCH v6 2/5] ARM: davinci: da8xx: Add CFGCHIP syscon platform declaration David Lechner
2016-10-26  3:06   ` David Lechner
2016-10-26  9:58   ` Sekhar Nori
2016-10-26  9:58     ` Sekhar Nori
2016-10-26  9:58     ` Sekhar Nori
2016-10-26  3:06 ` [PATCH v6 3/5] ARM: davinci: da8xx: Add USB PHY " David Lechner
2016-10-26  3:06   ` David Lechner
2016-10-26  3:06 ` [PATCH v6 4/5] ARM: DTS: da850: Add cfgchip syscon node David Lechner
2016-10-26  3:06   ` David Lechner
2016-10-26  3:06   ` David Lechner
2016-10-26 10:19   ` Sekhar Nori
2016-10-26 10:19     ` Sekhar Nori
2016-10-26 10:19     ` Sekhar Nori
2016-10-26 16:08   ` David Lechner
2016-10-26 16:08     ` David Lechner
2016-10-26 16:08     ` David Lechner
2016-10-28  8:21     ` Sekhar Nori
2016-10-28  8:21       ` Sekhar Nori
2016-10-28  8:21       ` Sekhar Nori
2016-10-28 17:08       ` Kevin Hilman
2016-10-28 17:08         ` Kevin Hilman
2016-10-28 17:08         ` Kevin Hilman
2016-10-28 17:24         ` David Lechner
2016-10-28 17:24           ` David Lechner
2016-10-28 17:24           ` David Lechner
2016-10-28 20:53           ` Kevin Hilman
2016-10-28 20:53             ` Kevin Hilman
2016-10-26  3:06 ` [PATCH v6 5/5] ARM: DTS: da850: Add usb phy node David Lechner
2016-10-26  3:06   ` David Lechner
2016-10-26 10:26   ` Sekhar Nori
2016-10-26 10:26     ` Sekhar Nori
2016-10-26 10:26     ` Sekhar Nori
2016-10-27 15:55     ` David Lechner
2016-10-27 15:55       ` David Lechner

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1477451211-31979-1-git-send-email-david@lechnology.com \
    --to=david@lechnology.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.