From: david@lechnology.com (David Lechner)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v7 2/4] ARM: davinci: da8xx: Add USB device names to clock lookup tables
Date: Wed, 26 Oct 2016 19:18:16 -0500 [thread overview]
Message-ID: <1477527498-21930-3-git-send-email-david@lechnology.com> (raw)
In-Reply-To: <1477527498-21930-1-git-send-email-david@lechnology.com>
This adds device names for the SoC USB devices to the clock lookup tables
in da830.c and da850.c.
Also add the USB device names to the da850_auxdata_lookup[] table.
Signed-off-by: David Lechner <david@lechnology.com>
---
This is a new patch setting up clock lookup names that will be used in "ARM:
davinci: da8xx: add usb phy clocks"
arch/arm/mach-davinci/da830.c | 4 ++--
arch/arm/mach-davinci/da850.c | 4 ++--
arch/arm/mach-davinci/da8xx-dt.c | 2 ++
3 files changed, 6 insertions(+), 4 deletions(-)
diff --git a/arch/arm/mach-davinci/da830.c b/arch/arm/mach-davinci/da830.c
index 426fd74..41459bd 100644
--- a/arch/arm/mach-davinci/da830.c
+++ b/arch/arm/mach-davinci/da830.c
@@ -412,7 +412,7 @@ static struct clk_lookup da830_clks[] = {
CLK("davinci-mcasp.0", NULL, &mcasp0_clk),
CLK("davinci-mcasp.1", NULL, &mcasp1_clk),
CLK("davinci-mcasp.2", NULL, &mcasp2_clk),
- CLK(NULL, "usb20", &usb20_clk),
+ CLK("musb-da8xx", "usb20", &usb20_clk),
CLK(NULL, "aemif", &aemif_clk),
CLK(NULL, "aintc", &aintc_clk),
CLK(NULL, "secu_mgr", &secu_mgr_clk),
@@ -420,7 +420,7 @@ static struct clk_lookup da830_clks[] = {
CLK("davinci_mdio.0", "fck", &emac_clk),
CLK(NULL, "gpio", &gpio_clk),
CLK("i2c_davinci.2", NULL, &i2c1_clk),
- CLK(NULL, "usb11", &usb11_clk),
+ CLK("ohci", "usb11", &usb11_clk),
CLK(NULL, "emif3", &emif3_clk),
CLK(NULL, "arm", &arm_clk),
CLK(NULL, "rmii", &rmii_clk),
diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c
index 6b78a8f..47084be 100644
--- a/arch/arm/mach-davinci/da850.c
+++ b/arch/arm/mach-davinci/da850.c
@@ -503,8 +503,8 @@ static struct clk_lookup da850_clks[] = {
CLK("da830-mmc.1", NULL, &mmcsd1_clk),
CLK("ti-aemif", NULL, &aemif_clk),
CLK(NULL, "aemif", &aemif_clk),
- CLK(NULL, "usb11", &usb11_clk),
- CLK(NULL, "usb20", &usb20_clk),
+ CLK("ohci", "usb11", &usb11_clk),
+ CLK("musb-da8xx", "usb20", &usb20_clk),
CLK("spi_davinci.0", NULL, &spi0_clk),
CLK("spi_davinci.1", NULL, &spi1_clk),
CLK("vpif", NULL, &vpif_clk),
diff --git a/arch/arm/mach-davinci/da8xx-dt.c b/arch/arm/mach-davinci/da8xx-dt.c
index b03ad19..aec569f9 100644
--- a/arch/arm/mach-davinci/da8xx-dt.c
+++ b/arch/arm/mach-davinci/da8xx-dt.c
@@ -39,6 +39,8 @@ static struct of_dev_auxdata da850_auxdata_lookup[] __initdata = {
OF_DEV_AUXDATA("ti,da830-mcasp-audio", 0x01d00000, "davinci-mcasp.0", NULL),
OF_DEV_AUXDATA("ti,da850-aemif", 0x68000000, "ti-aemif", NULL),
OF_DEV_AUXDATA("ti,da850-tilcdc", 0x01e13000, "da8xx_lcdc.0", NULL),
+ OF_DEV_AUXDATA("ti,da830-ohci", 0x01e25000, "ohci", NULL),
+ OF_DEV_AUXDATA("ti,da830-musb", 0x01e00000, "musb-da8xx", NULL),
{}
};
--
2.7.4
WARNING: multiple messages have this Message-ID (diff)
From: David Lechner <david@lechnology.com>
To: Sekhar Nori <nsekhar@ti.com>, Kevin Hilman <khilman@kernel.org>
Cc: David Lechner <david@lechnology.com>,
Axel Haslam <ahaslam@baylibre.com>,
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: [PATCH v7 2/4] ARM: davinci: da8xx: Add USB device names to clock lookup tables
Date: Wed, 26 Oct 2016 19:18:16 -0500 [thread overview]
Message-ID: <1477527498-21930-3-git-send-email-david@lechnology.com> (raw)
In-Reply-To: <1477527498-21930-1-git-send-email-david@lechnology.com>
This adds device names for the SoC USB devices to the clock lookup tables
in da830.c and da850.c.
Also add the USB device names to the da850_auxdata_lookup[] table.
Signed-off-by: David Lechner <david@lechnology.com>
---
This is a new patch setting up clock lookup names that will be used in "ARM:
davinci: da8xx: add usb phy clocks"
arch/arm/mach-davinci/da830.c | 4 ++--
arch/arm/mach-davinci/da850.c | 4 ++--
arch/arm/mach-davinci/da8xx-dt.c | 2 ++
3 files changed, 6 insertions(+), 4 deletions(-)
diff --git a/arch/arm/mach-davinci/da830.c b/arch/arm/mach-davinci/da830.c
index 426fd74..41459bd 100644
--- a/arch/arm/mach-davinci/da830.c
+++ b/arch/arm/mach-davinci/da830.c
@@ -412,7 +412,7 @@ static struct clk_lookup da830_clks[] = {
CLK("davinci-mcasp.0", NULL, &mcasp0_clk),
CLK("davinci-mcasp.1", NULL, &mcasp1_clk),
CLK("davinci-mcasp.2", NULL, &mcasp2_clk),
- CLK(NULL, "usb20", &usb20_clk),
+ CLK("musb-da8xx", "usb20", &usb20_clk),
CLK(NULL, "aemif", &aemif_clk),
CLK(NULL, "aintc", &aintc_clk),
CLK(NULL, "secu_mgr", &secu_mgr_clk),
@@ -420,7 +420,7 @@ static struct clk_lookup da830_clks[] = {
CLK("davinci_mdio.0", "fck", &emac_clk),
CLK(NULL, "gpio", &gpio_clk),
CLK("i2c_davinci.2", NULL, &i2c1_clk),
- CLK(NULL, "usb11", &usb11_clk),
+ CLK("ohci", "usb11", &usb11_clk),
CLK(NULL, "emif3", &emif3_clk),
CLK(NULL, "arm", &arm_clk),
CLK(NULL, "rmii", &rmii_clk),
diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c
index 6b78a8f..47084be 100644
--- a/arch/arm/mach-davinci/da850.c
+++ b/arch/arm/mach-davinci/da850.c
@@ -503,8 +503,8 @@ static struct clk_lookup da850_clks[] = {
CLK("da830-mmc.1", NULL, &mmcsd1_clk),
CLK("ti-aemif", NULL, &aemif_clk),
CLK(NULL, "aemif", &aemif_clk),
- CLK(NULL, "usb11", &usb11_clk),
- CLK(NULL, "usb20", &usb20_clk),
+ CLK("ohci", "usb11", &usb11_clk),
+ CLK("musb-da8xx", "usb20", &usb20_clk),
CLK("spi_davinci.0", NULL, &spi0_clk),
CLK("spi_davinci.1", NULL, &spi1_clk),
CLK("vpif", NULL, &vpif_clk),
diff --git a/arch/arm/mach-davinci/da8xx-dt.c b/arch/arm/mach-davinci/da8xx-dt.c
index b03ad19..aec569f9 100644
--- a/arch/arm/mach-davinci/da8xx-dt.c
+++ b/arch/arm/mach-davinci/da8xx-dt.c
@@ -39,6 +39,8 @@ static struct of_dev_auxdata da850_auxdata_lookup[] __initdata = {
OF_DEV_AUXDATA("ti,da830-mcasp-audio", 0x01d00000, "davinci-mcasp.0", NULL),
OF_DEV_AUXDATA("ti,da850-aemif", 0x68000000, "ti-aemif", NULL),
OF_DEV_AUXDATA("ti,da850-tilcdc", 0x01e13000, "da8xx_lcdc.0", NULL),
+ OF_DEV_AUXDATA("ti,da830-ohci", 0x01e25000, "ohci", NULL),
+ OF_DEV_AUXDATA("ti,da830-musb", 0x01e00000, "musb-da8xx", NULL),
{}
};
--
2.7.4
next prev parent reply other threads:[~2016-10-27 0:18 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-10-27 0:18 [PATCH v7 0/4] da8xx USB PHY platform devices and clocks David Lechner
2016-10-27 0:18 ` David Lechner
2016-10-27 0:18 ` [PATCH v7 1/4] ARM: davinci: da8xx: Add USB PHY platform declaration David Lechner
2016-10-27 0:18 ` David Lechner
2016-10-31 11:54 ` Sekhar Nori
2016-10-31 11:54 ` Sekhar Nori
2016-10-27 0:18 ` David Lechner [this message]
2016-10-27 0:18 ` [PATCH v7 2/4] ARM: davinci: da8xx: Add USB device names to clock lookup tables David Lechner
2016-10-31 11:55 ` Sekhar Nori
2016-10-31 11:55 ` Sekhar Nori
2016-10-27 0:18 ` [PATCH v7 3/4] ARM: davinci: da8xx: add usb phy clocks David Lechner
2016-10-27 0:18 ` David Lechner
2016-10-27 0:18 ` [PATCH v7 4/4] ARM: davinci: da8xx: register USB PHY clocks in the DT file David Lechner
2016-10-27 0:18 ` David Lechner
2016-10-28 9:59 ` [PATCH v7 0/4] da8xx USB PHY platform devices and clocks Sekhar Nori
2016-10-28 9:59 ` Sekhar Nori
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1477527498-21930-3-git-send-email-david@lechnology.com \
--to=david@lechnology.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.