[PATCH] net: phy: at803x: the Atheros 8031 supports pause frames

[Timur Tabi <timur@codeaurora.org>]

The Atheros 8031 PHY supports the 802.3 extension for symmetric and
asymmetric pause frames, so set that to the list of features supported
by the phy.

Signed-off-by: Timur Tabi <timur@codeaurora.org>
---

Without this patch, my NIC (the Qualcomm EMAC) receives a lot of frame
check sequence (aka CRC) errors, resulting in about 10% packet loss.
Can someone help me understand why?  Because of this patch, I can't use
the generic phy driver in phylib.  Why would a MAC controller require
its PHY to support pause frames?

 drivers/net/phy/at803x.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c
index a52b560..fb80413 100644
--- a/drivers/net/phy/at803x.c
+++ b/drivers/net/phy/at803x.c
@@ -440,7 +440,8 @@ static struct phy_driver at803x_driver[] = {
 	.get_wol		= at803x_get_wol,
 	.suspend		= at803x_suspend,
 	.resume			= at803x_resume,
-	.features		= PHY_GBIT_FEATURES,
+	.features		= PHY_GBIT_FEATURES |
+				  SUPPORTED_Pause | SUPPORTED_Asym_Pause,
 	.flags			= PHY_HAS_INTERRUPT,
 	.config_aneg		= genphy_config_aneg,
 	.read_status		= genphy_read_status,
-- 
Qualcomm Datacenter Technologies, Inc. as an affiliate of Qualcomm
Technologies, Inc.  Qualcomm Technologies, Inc. is a member of the
Code Aurora Forum, a Linux Foundation Collaborative Project.