From: Sarangdhar Joshi <spjoshi@codeaurora.org>
To: Andy Gross <andy.gross@linaro.org>, David Brown <david.brown@linaro.org>
Cc: Sarangdhar Joshi <spjoshi@codeaurora.org>,
linux-arm-msm@vger.kernel.org, linux-soc@vger.kernel.org,
linux-kernel@vger.kernel.org,
Bjorn Andersson <bjorn.andersson@linaro.org>,
Jordan Crouse <jcrouse@codeaurora.org>,
Stephen Boyd <sboyd@codeaurora.org>,
Trilok Soni <tsoni@codeaurora.org>
Subject: [PATCH v2 2/3] firmware: qcom: scm: Remove core, iface and bus clocks dependency
Date: Thu, 3 Nov 2016 17:10:36 -0700 [thread overview]
Message-ID: <1478218237-1737-3-git-send-email-spjoshi@codeaurora.org> (raw)
In-Reply-To: <1478218237-1737-1-git-send-email-spjoshi@codeaurora.org>
Core, iface and bus clocks are not required to be voted from SCM
driver for some of the Qualcomm chipsets. Remove dependency on
these clocks from driver.
Suggested-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sarangdhar Joshi <spjoshi@codeaurora.org>
---
drivers/firmware/qcom_scm.c | 49 ++++++++++++++++++++++++++++++++++-----------
1 file changed, 37 insertions(+), 12 deletions(-)
diff --git a/drivers/firmware/qcom_scm.c b/drivers/firmware/qcom_scm.c
index d79fecd..844e90d 100644
--- a/drivers/firmware/qcom_scm.c
+++ b/drivers/firmware/qcom_scm.c
@@ -28,6 +28,10 @@
#include "qcom_scm.h"
+#define SCM_HAS_CORE_CLK BIT(0)
+#define SCM_HAS_IFACE_CLK BIT(1)
+#define SCM_HAS_BUS_CLK BIT(2)
+
struct qcom_scm {
struct device *dev;
struct clk *core_clk;
@@ -380,32 +384,40 @@ EXPORT_SYMBOL(qcom_scm_is_available);
static int qcom_scm_probe(struct platform_device *pdev)
{
struct qcom_scm *scm;
+ uint32_t clks;
int ret;
scm = devm_kzalloc(&pdev->dev, sizeof(*scm), GFP_KERNEL);
if (!scm)
return -ENOMEM;
- scm->core_clk = devm_clk_get(&pdev->dev, "core");
- if (IS_ERR(scm->core_clk)) {
- if (PTR_ERR(scm->core_clk) == -EPROBE_DEFER)
- return PTR_ERR(scm->core_clk);
+ clks = (uint32_t)((uintptr_t)of_device_get_match_data(&pdev->dev));
+ if (clks & SCM_HAS_CORE_CLK) {
+ scm->core_clk = devm_clk_get(&pdev->dev, "core");
+ if (IS_ERR(scm->core_clk)) {
+ if (PTR_ERR(scm->core_clk) == -EPROBE_DEFER)
+ return PTR_ERR(scm->core_clk);
- scm->core_clk = NULL;
+ scm->core_clk = NULL;
+ }
}
- if (of_device_is_compatible(pdev->dev.of_node, "qcom,scm")) {
+ if (clks & SCM_HAS_IFACE_CLK) {
scm->iface_clk = devm_clk_get(&pdev->dev, "iface");
if (IS_ERR(scm->iface_clk)) {
if (PTR_ERR(scm->iface_clk) != -EPROBE_DEFER)
- dev_err(&pdev->dev, "failed to acquire iface clk\n");
+ dev_err(&pdev->dev,
+ "failed to acquire iface clk\n");
return PTR_ERR(scm->iface_clk);
}
+ }
+ if (clks & SCM_HAS_BUS_CLK) {
scm->bus_clk = devm_clk_get(&pdev->dev, "bus");
if (IS_ERR(scm->bus_clk)) {
if (PTR_ERR(scm->bus_clk) != -EPROBE_DEFER)
- dev_err(&pdev->dev, "failed to acquire bus clk\n");
+ dev_err(&pdev->dev,
+ "failed to acquire bus clk\n");
return PTR_ERR(scm->bus_clk);
}
}
@@ -429,10 +441,23 @@ static int qcom_scm_probe(struct platform_device *pdev)
}
static const struct of_device_id qcom_scm_dt_match[] = {
- { .compatible = "qcom,scm-apq8064",},
- { .compatible = "qcom,scm-msm8660",},
- { .compatible = "qcom,scm-msm8960",},
- { .compatible = "qcom,scm",},
+ { .compatible = "qcom,scm-apq8064",
+ .data = (void *) SCM_HAS_CORE_CLK,
+ },
+ { .compatible = "qcom,scm-msm8660",
+ .data = (void *) SCM_HAS_CORE_CLK,
+ },
+ { .compatible = "qcom,scm-msm8960",
+ .data = (void *) SCM_HAS_CORE_CLK,
+ },
+ { .compatible = "qcom,scm-msm8996",
+ .data = NULL, /* no clocks */
+ },
+ { .compatible = "qcom,scm",
+ .data = (void *)(SCM_HAS_CORE_CLK
+ | SCM_HAS_IFACE_CLK
+ | SCM_HAS_BUS_CLK),
+ },
{}
};
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
next prev parent reply other threads:[~2016-11-04 0:10 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-11-04 0:10 [PATCH v2 0/3] Remove clocks dependency from SCM driver Sarangdhar Joshi
2016-11-04 0:10 ` Sarangdhar Joshi
2016-11-04 0:10 ` Sarangdhar Joshi
2016-11-04 0:10 ` [PATCH v2 1/3] dt-bindings: firmware: scm: Add MSM8996 DT bindings Sarangdhar Joshi
2016-11-04 0:10 ` Sarangdhar Joshi
[not found] ` <1478218237-1737-2-git-send-email-spjoshi-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2016-11-10 1:49 ` Stephen Boyd
2016-11-10 1:49 ` Stephen Boyd
2016-11-10 1:49 ` Stephen Boyd
2016-11-04 0:10 ` Sarangdhar Joshi [this message]
2016-11-10 1:47 ` [PATCH v2 2/3] firmware: qcom: scm: Remove core, iface and bus clocks dependency Stephen Boyd
2016-11-10 5:55 ` Bjorn Andersson
2016-11-10 23:17 ` Stephen Boyd
2016-11-11 22:07 ` Sarangdhar Joshi
2016-11-11 21:59 ` Sarangdhar Joshi
2016-11-04 0:10 ` [PATCH v2 3/3] firmware: qcom: scm: Return PTR_ERR when devm_clk_get fails Sarangdhar Joshi
2016-11-10 1:49 ` Stephen Boyd
2016-11-11 21:30 ` Sarangdhar Joshi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1478218237-1737-3-git-send-email-spjoshi@codeaurora.org \
--to=spjoshi@codeaurora.org \
--cc=andy.gross@linaro.org \
--cc=bjorn.andersson@linaro.org \
--cc=david.brown@linaro.org \
--cc=jcrouse@codeaurora.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-soc@vger.kernel.org \
--cc=sboyd@codeaurora.org \
--cc=tsoni@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.