* [PATCH 0/2] ARM: da850: enable the MSTPRI and DDR2/mDDR drivers @ 2016-11-14 17:32 ` Bartosz Golaszewski 0 siblings, 0 replies; 14+ messages in thread From: Bartosz Golaszewski @ 2016-11-14 17:32 UTC (permalink / raw) To: linux-arm-kernel This is a follow-up for my previous series: ARM: da850: new drivers for better LCDC support from which the new drivers were merged, while the patch adding the panel node was nacked and has been dropped. The first patch in this series enables the new drivers in da850.dtsi. It has been changed since the last iteration to not disable the added nodes. Also: the patch enabling the nodes in da850-lcdk.dts has been dropped too. The second patch updates the davinci defconfig. Bartosz Golaszewski (2): ARM: dts: da850: add the mstpri and ddrctl nodes ARM: davinci_all_defconfig: enable the mstpri and ddrctl drivers arch/arm/boot/dts/da850.dtsi | 9 +++++++++ arch/arm/configs/davinci_all_defconfig | 2 ++ 2 files changed, 11 insertions(+) -- 2.9.3 ^ permalink raw reply [flat|nested] 14+ messages in thread
* [PATCH 0/2] ARM: da850: enable the MSTPRI and DDR2/mDDR drivers @ 2016-11-14 17:32 ` Bartosz Golaszewski 0 siblings, 0 replies; 14+ messages in thread From: Bartosz Golaszewski @ 2016-11-14 17:32 UTC (permalink / raw) To: Kevin Hilman, Michael Turquette, Sekhar Nori, Rob Herring, Frank Rowand, Mark Rutland, Peter Ujfalusi, Russell King Cc: LKML, arm-soc, linux-drm, linux-devicetree, Jyri Sarha, Tomi Valkeinen, David Airlie, Laurent Pinchart, Bartosz Golaszewski This is a follow-up for my previous series: ARM: da850: new drivers for better LCDC support from which the new drivers were merged, while the patch adding the panel node was nacked and has been dropped. The first patch in this series enables the new drivers in da850.dtsi. It has been changed since the last iteration to not disable the added nodes. Also: the patch enabling the nodes in da850-lcdk.dts has been dropped too. The second patch updates the davinci defconfig. Bartosz Golaszewski (2): ARM: dts: da850: add the mstpri and ddrctl nodes ARM: davinci_all_defconfig: enable the mstpri and ddrctl drivers arch/arm/boot/dts/da850.dtsi | 9 +++++++++ arch/arm/configs/davinci_all_defconfig | 2 ++ 2 files changed, 11 insertions(+) -- 2.9.3 ^ permalink raw reply [flat|nested] 14+ messages in thread
* [PATCH 0/2] ARM: da850: enable the MSTPRI and DDR2/mDDR drivers @ 2016-11-14 17:32 ` Bartosz Golaszewski 0 siblings, 0 replies; 14+ messages in thread From: Bartosz Golaszewski @ 2016-11-14 17:32 UTC (permalink / raw) To: Kevin Hilman, Michael Turquette, Sekhar Nori, Rob Herring, Frank Rowand, Mark Rutland, Peter Ujfalusi, Russell King Cc: linux-devicetree, LKML, linux-drm, Bartosz Golaszewski, Tomi Valkeinen, Jyri Sarha, arm-soc, Laurent Pinchart This is a follow-up for my previous series: ARM: da850: new drivers for better LCDC support from which the new drivers were merged, while the patch adding the panel node was nacked and has been dropped. The first patch in this series enables the new drivers in da850.dtsi. It has been changed since the last iteration to not disable the added nodes. Also: the patch enabling the nodes in da850-lcdk.dts has been dropped too. The second patch updates the davinci defconfig. Bartosz Golaszewski (2): ARM: dts: da850: add the mstpri and ddrctl nodes ARM: davinci_all_defconfig: enable the mstpri and ddrctl drivers arch/arm/boot/dts/da850.dtsi | 9 +++++++++ arch/arm/configs/davinci_all_defconfig | 2 ++ 2 files changed, 11 insertions(+) -- 2.9.3 _______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel ^ permalink raw reply [flat|nested] 14+ messages in thread
* [PATCH 1/2] ARM: dts: da850: add the mstpri and ddrctl nodes 2016-11-14 17:32 ` Bartosz Golaszewski (?) @ 2016-11-14 17:32 ` Bartosz Golaszewski -1 siblings, 0 replies; 14+ messages in thread From: Bartosz Golaszewski @ 2016-11-14 17:32 UTC (permalink / raw) To: linux-arm-kernel Add the nodes for the MSTPRI configuration and DDR2/mDDR memory controller drivers to da850.dtsi. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> --- arch/arm/boot/dts/da850.dtsi | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi index 1bb1f6d..1635218 100644 --- a/arch/arm/boot/dts/da850.dtsi +++ b/arch/arm/boot/dts/da850.dtsi @@ -440,6 +440,11 @@ interrupts = <52>; status = "disabled"; }; + + mstpri: mstpri at 14110 { + compatible = "ti,da850-mstpri"; + reg = <0x14110 0x0c>; + }; }; aemif: aemif at 68000000 { compatible = "ti,da850-aemif"; @@ -451,4 +456,8 @@ 1 0 0x68000000 0x00008000>; status = "disabled"; }; + ddrctl: ddrctl at b0000000 { + compatible = "ti,da850-ddr-controller"; + reg = <0xb0000000 0xe8>; + }; }; -- 2.9.3 ^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCH 1/2] ARM: dts: da850: add the mstpri and ddrctl nodes @ 2016-11-14 17:32 ` Bartosz Golaszewski 0 siblings, 0 replies; 14+ messages in thread From: Bartosz Golaszewski @ 2016-11-14 17:32 UTC (permalink / raw) To: Kevin Hilman, Michael Turquette, Sekhar Nori, Rob Herring, Frank Rowand, Mark Rutland, Peter Ujfalusi, Russell King Cc: LKML, arm-soc, linux-drm, linux-devicetree, Jyri Sarha, Tomi Valkeinen, David Airlie, Laurent Pinchart, Bartosz Golaszewski Add the nodes for the MSTPRI configuration and DDR2/mDDR memory controller drivers to da850.dtsi. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> --- arch/arm/boot/dts/da850.dtsi | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi index 1bb1f6d..1635218 100644 --- a/arch/arm/boot/dts/da850.dtsi +++ b/arch/arm/boot/dts/da850.dtsi @@ -440,6 +440,11 @@ interrupts = <52>; status = "disabled"; }; + + mstpri: mstpri@14110 { + compatible = "ti,da850-mstpri"; + reg = <0x14110 0x0c>; + }; }; aemif: aemif@68000000 { compatible = "ti,da850-aemif"; @@ -451,4 +456,8 @@ 1 0 0x68000000 0x00008000>; status = "disabled"; }; + ddrctl: ddrctl@b0000000 { + compatible = "ti,da850-ddr-controller"; + reg = <0xb0000000 0xe8>; + }; }; -- 2.9.3 ^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCH 1/2] ARM: dts: da850: add the mstpri and ddrctl nodes @ 2016-11-14 17:32 ` Bartosz Golaszewski 0 siblings, 0 replies; 14+ messages in thread From: Bartosz Golaszewski @ 2016-11-14 17:32 UTC (permalink / raw) To: Kevin Hilman, Michael Turquette, Sekhar Nori, Rob Herring, Frank Rowand, Mark Rutland, Peter Ujfalusi, Russell King Cc: linux-devicetree, LKML, linux-drm, Bartosz Golaszewski, Tomi Valkeinen, Jyri Sarha, arm-soc, Laurent Pinchart Add the nodes for the MSTPRI configuration and DDR2/mDDR memory controller drivers to da850.dtsi. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> --- arch/arm/boot/dts/da850.dtsi | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi index 1bb1f6d..1635218 100644 --- a/arch/arm/boot/dts/da850.dtsi +++ b/arch/arm/boot/dts/da850.dtsi @@ -440,6 +440,11 @@ interrupts = <52>; status = "disabled"; }; + + mstpri: mstpri@14110 { + compatible = "ti,da850-mstpri"; + reg = <0x14110 0x0c>; + }; }; aemif: aemif@68000000 { compatible = "ti,da850-aemif"; @@ -451,4 +456,8 @@ 1 0 0x68000000 0x00008000>; status = "disabled"; }; + ddrctl: ddrctl@b0000000 { + compatible = "ti,da850-ddr-controller"; + reg = <0xb0000000 0xe8>; + }; }; -- 2.9.3 _______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel ^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCH 1/2] ARM: dts: da850: add the mstpri and ddrctl nodes @ 2016-11-15 10:05 ` Sekhar Nori 0 siblings, 0 replies; 14+ messages in thread From: Sekhar Nori @ 2016-11-15 10:05 UTC (permalink / raw) To: linux-arm-kernel On Monday 14 November 2016 11:02 PM, Bartosz Golaszewski wrote: > Add the nodes for the MSTPRI configuration and DDR2/mDDR memory > controller drivers to da850.dtsi. > > Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> > --- > arch/arm/boot/dts/da850.dtsi | 9 +++++++++ > 1 file changed, 9 insertions(+) > > diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi > index 1bb1f6d..1635218 100644 > --- a/arch/arm/boot/dts/da850.dtsi > +++ b/arch/arm/boot/dts/da850.dtsi > @@ -440,6 +440,11 @@ > interrupts = <52>; > status = "disabled"; > }; > + > + mstpri: mstpri at 14110 { > + compatible = "ti,da850-mstpri"; > + reg = <0x14110 0x0c>; > + }; Instead of adding the node to the end, can you place it above the cfgchip node to keep it sorted by reg. We have not really followed that in this file. May be we should have. But lets start with this. > }; > aemif: aemif at 68000000 { > compatible = "ti,da850-aemif"; > @@ -451,4 +456,8 @@ > 1 0 0x68000000 0x00008000>; > status = "disabled"; > }; > + ddrctl: ddrctl at b0000000 { > + compatible = "ti,da850-ddr-controller"; > + reg = <0xb0000000 0xe8>; > + }; Can you name the node memory-controller at b0000000? Thats the generic name suggested by ePAPR 1.1 for memory controllers. I could not find any naming suggestions for the bus master priority controller above, but based on the pattern used for other controllers, may be it should be called priority-controller at 14110 instead of mstpri at 14110 Thanks, Sekhar ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH 1/2] ARM: dts: da850: add the mstpri and ddrctl nodes @ 2016-11-15 10:05 ` Sekhar Nori 0 siblings, 0 replies; 14+ messages in thread From: Sekhar Nori @ 2016-11-15 10:05 UTC (permalink / raw) To: Bartosz Golaszewski, Kevin Hilman, Michael Turquette, Rob Herring, Frank Rowand, Mark Rutland, Peter Ujfalusi, Russell King Cc: LKML, arm-soc, linux-drm, linux-devicetree, Jyri Sarha, Tomi Valkeinen, David Airlie, Laurent Pinchart On Monday 14 November 2016 11:02 PM, Bartosz Golaszewski wrote: > Add the nodes for the MSTPRI configuration and DDR2/mDDR memory > controller drivers to da850.dtsi. > > Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> > --- > arch/arm/boot/dts/da850.dtsi | 9 +++++++++ > 1 file changed, 9 insertions(+) > > diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi > index 1bb1f6d..1635218 100644 > --- a/arch/arm/boot/dts/da850.dtsi > +++ b/arch/arm/boot/dts/da850.dtsi > @@ -440,6 +440,11 @@ > interrupts = <52>; > status = "disabled"; > }; > + > + mstpri: mstpri@14110 { > + compatible = "ti,da850-mstpri"; > + reg = <0x14110 0x0c>; > + }; Instead of adding the node to the end, can you place it above the cfgchip node to keep it sorted by reg. We have not really followed that in this file. May be we should have. But lets start with this. > }; > aemif: aemif@68000000 { > compatible = "ti,da850-aemif"; > @@ -451,4 +456,8 @@ > 1 0 0x68000000 0x00008000>; > status = "disabled"; > }; > + ddrctl: ddrctl@b0000000 { > + compatible = "ti,da850-ddr-controller"; > + reg = <0xb0000000 0xe8>; > + }; Can you name the node memory-controller@b0000000? Thats the generic name suggested by ePAPR 1.1 for memory controllers. I could not find any naming suggestions for the bus master priority controller above, but based on the pattern used for other controllers, may be it should be called priority-controller@14110 instead of mstpri@14110 Thanks, Sekhar ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH 1/2] ARM: dts: da850: add the mstpri and ddrctl nodes @ 2016-11-15 10:05 ` Sekhar Nori 0 siblings, 0 replies; 14+ messages in thread From: Sekhar Nori @ 2016-11-15 10:05 UTC (permalink / raw) To: Bartosz Golaszewski, Kevin Hilman, Michael Turquette, Rob Herring, Frank Rowand, Mark Rutland, Peter Ujfalusi, Russell King Cc: LKML, arm-soc, linux-drm, linux-devicetree, Jyri Sarha, Tomi Valkeinen, David Airlie, Laurent Pinchart On Monday 14 November 2016 11:02 PM, Bartosz Golaszewski wrote: > Add the nodes for the MSTPRI configuration and DDR2/mDDR memory > controller drivers to da850.dtsi. > > Signed-off-by: Bartosz Golaszewski <bgolaszewski-rdvid1DuHRBWk0Htik3J/w@public.gmane.org> > --- > arch/arm/boot/dts/da850.dtsi | 9 +++++++++ > 1 file changed, 9 insertions(+) > > diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi > index 1bb1f6d..1635218 100644 > --- a/arch/arm/boot/dts/da850.dtsi > +++ b/arch/arm/boot/dts/da850.dtsi > @@ -440,6 +440,11 @@ > interrupts = <52>; > status = "disabled"; > }; > + > + mstpri: mstpri@14110 { > + compatible = "ti,da850-mstpri"; > + reg = <0x14110 0x0c>; > + }; Instead of adding the node to the end, can you place it above the cfgchip node to keep it sorted by reg. We have not really followed that in this file. May be we should have. But lets start with this. > }; > aemif: aemif@68000000 { > compatible = "ti,da850-aemif"; > @@ -451,4 +456,8 @@ > 1 0 0x68000000 0x00008000>; > status = "disabled"; > }; > + ddrctl: ddrctl@b0000000 { > + compatible = "ti,da850-ddr-controller"; > + reg = <0xb0000000 0xe8>; > + }; Can you name the node memory-controller@b0000000? Thats the generic name suggested by ePAPR 1.1 for memory controllers. I could not find any naming suggestions for the bus master priority controller above, but based on the pattern used for other controllers, may be it should be called priority-controller@14110 instead of mstpri@14110 Thanks, Sekhar -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 14+ messages in thread
* [PATCH 2/2] ARM: davinci_all_defconfig: enable the mstpri and ddrctl drivers 2016-11-14 17:32 ` Bartosz Golaszewski (?) @ 2016-11-14 17:32 ` Bartosz Golaszewski -1 siblings, 0 replies; 14+ messages in thread From: Bartosz Golaszewski @ 2016-11-14 17:32 UTC (permalink / raw) To: linux-arm-kernel With the da8xx memory controller and master peripheral priority drivers merged and corresponding device tree changes in place we can now enable appropriate options by default. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> --- arch/arm/configs/davinci_all_defconfig | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/configs/davinci_all_defconfig b/arch/arm/configs/davinci_all_defconfig index b5e978f..f814f01 100644 --- a/arch/arm/configs/davinci_all_defconfig +++ b/arch/arm/configs/davinci_all_defconfig @@ -56,6 +56,7 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y # CONFIG_FW_LOADER is not set +CONFIG_DA8XX_MSTPRI=y CONFIG_MTD=m CONFIG_MTD_BLOCK=m CONFIG_MTD_CFI=m @@ -187,6 +188,7 @@ CONFIG_DMADEVICES=y CONFIG_TI_EDMA=y CONFIG_MEMORY=y CONFIG_TI_AEMIF=m +CONFIG_DA8XX_DDRCTL=y CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y CONFIG_XFS_FS=m -- 2.9.3 ^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCH 2/2] ARM: davinci_all_defconfig: enable the mstpri and ddrctl drivers @ 2016-11-14 17:32 ` Bartosz Golaszewski 0 siblings, 0 replies; 14+ messages in thread From: Bartosz Golaszewski @ 2016-11-14 17:32 UTC (permalink / raw) To: Kevin Hilman, Michael Turquette, Sekhar Nori, Rob Herring, Frank Rowand, Mark Rutland, Peter Ujfalusi, Russell King Cc: LKML, arm-soc, linux-drm, linux-devicetree, Jyri Sarha, Tomi Valkeinen, David Airlie, Laurent Pinchart, Bartosz Golaszewski With the da8xx memory controller and master peripheral priority drivers merged and corresponding device tree changes in place we can now enable appropriate options by default. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> --- arch/arm/configs/davinci_all_defconfig | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/configs/davinci_all_defconfig b/arch/arm/configs/davinci_all_defconfig index b5e978f..f814f01 100644 --- a/arch/arm/configs/davinci_all_defconfig +++ b/arch/arm/configs/davinci_all_defconfig @@ -56,6 +56,7 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y # CONFIG_FW_LOADER is not set +CONFIG_DA8XX_MSTPRI=y CONFIG_MTD=m CONFIG_MTD_BLOCK=m CONFIG_MTD_CFI=m @@ -187,6 +188,7 @@ CONFIG_DMADEVICES=y CONFIG_TI_EDMA=y CONFIG_MEMORY=y CONFIG_TI_AEMIF=m +CONFIG_DA8XX_DDRCTL=y CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y CONFIG_XFS_FS=m -- 2.9.3 ^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCH 2/2] ARM: davinci_all_defconfig: enable the mstpri and ddrctl drivers @ 2016-11-14 17:32 ` Bartosz Golaszewski 0 siblings, 0 replies; 14+ messages in thread From: Bartosz Golaszewski @ 2016-11-14 17:32 UTC (permalink / raw) To: Kevin Hilman, Michael Turquette, Sekhar Nori, Rob Herring, Frank Rowand, Mark Rutland, Peter Ujfalusi, Russell King Cc: linux-devicetree, LKML, linux-drm, Bartosz Golaszewski, Tomi Valkeinen, Jyri Sarha, arm-soc, Laurent Pinchart With the da8xx memory controller and master peripheral priority drivers merged and corresponding device tree changes in place we can now enable appropriate options by default. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> --- arch/arm/configs/davinci_all_defconfig | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/configs/davinci_all_defconfig b/arch/arm/configs/davinci_all_defconfig index b5e978f..f814f01 100644 --- a/arch/arm/configs/davinci_all_defconfig +++ b/arch/arm/configs/davinci_all_defconfig @@ -56,6 +56,7 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y # CONFIG_FW_LOADER is not set +CONFIG_DA8XX_MSTPRI=y CONFIG_MTD=m CONFIG_MTD_BLOCK=m CONFIG_MTD_CFI=m @@ -187,6 +188,7 @@ CONFIG_DMADEVICES=y CONFIG_TI_EDMA=y CONFIG_MEMORY=y CONFIG_TI_AEMIF=m +CONFIG_DA8XX_DDRCTL=y CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y CONFIG_XFS_FS=m -- 2.9.3 _______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel ^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCH 2/2] ARM: davinci_all_defconfig: enable the mstpri and ddrctl drivers 2016-11-14 17:32 ` Bartosz Golaszewski @ 2016-11-15 10:12 ` Sekhar Nori -1 siblings, 0 replies; 14+ messages in thread From: Sekhar Nori @ 2016-11-15 10:12 UTC (permalink / raw) To: linux-arm-kernel On Monday 14 November 2016 11:02 PM, Bartosz Golaszewski wrote: > With the da8xx memory controller and master peripheral priority > drivers merged and corresponding device tree changes in place we can > now enable appropriate options by default. > > Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Applied to v4.10/defconfig Thanks, Sekhar ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH 2/2] ARM: davinci_all_defconfig: enable the mstpri and ddrctl drivers @ 2016-11-15 10:12 ` Sekhar Nori 0 siblings, 0 replies; 14+ messages in thread From: Sekhar Nori @ 2016-11-15 10:12 UTC (permalink / raw) To: Bartosz Golaszewski, Kevin Hilman, Michael Turquette, Rob Herring, Frank Rowand, Mark Rutland, Peter Ujfalusi, Russell King Cc: LKML, arm-soc, linux-drm, linux-devicetree, Jyri Sarha, Tomi Valkeinen, David Airlie, Laurent Pinchart On Monday 14 November 2016 11:02 PM, Bartosz Golaszewski wrote: > With the da8xx memory controller and master peripheral priority > drivers merged and corresponding device tree changes in place we can > now enable appropriate options by default. > > Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Applied to v4.10/defconfig Thanks, Sekhar ^ permalink raw reply [flat|nested] 14+ messages in thread
end of thread, other threads:[~2016-11-15 10:12 UTC | newest] Thread overview: 14+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2016-11-14 17:32 [PATCH 0/2] ARM: da850: enable the MSTPRI and DDR2/mDDR drivers Bartosz Golaszewski 2016-11-14 17:32 ` Bartosz Golaszewski 2016-11-14 17:32 ` Bartosz Golaszewski 2016-11-14 17:32 ` [PATCH 1/2] ARM: dts: da850: add the mstpri and ddrctl nodes Bartosz Golaszewski 2016-11-14 17:32 ` Bartosz Golaszewski 2016-11-14 17:32 ` Bartosz Golaszewski 2016-11-15 10:05 ` Sekhar Nori 2016-11-15 10:05 ` Sekhar Nori 2016-11-15 10:05 ` Sekhar Nori 2016-11-14 17:32 ` [PATCH 2/2] ARM: davinci_all_defconfig: enable the mstpri and ddrctl drivers Bartosz Golaszewski 2016-11-14 17:32 ` Bartosz Golaszewski 2016-11-14 17:32 ` Bartosz Golaszewski 2016-11-15 10:12 ` Sekhar Nori 2016-11-15 10:12 ` Sekhar Nori
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.