Patch "clk: qoriq: Don't allow CPU clocks higher than starting value" has been added to the 4.4-stable tree

Patch "clk: qoriq: Don't allow CPU clocks higher than starting value" has been added to the 4.4-stable tree

[gregkh]

This is a note to let you know that I've just added the patch titled

    clk: qoriq: Don't allow CPU clocks higher than starting value

to the 4.4-stable tree which can be found at:
    http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
     clk-qoriq-don-t-allow-cpu-clocks-higher-than-starting-value.patch
and it can be found in the queue-4.4 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@vger.kernel.org> know about it.


>From 7c1c5413a7bdf1c9adc8d979521f1b8286366aef Mon Sep 17 00:00:00 2001
From: Scott Wood <oss@buserror.net>
Date: Mon, 17 Oct 2016 13:42:23 -0500
Subject: clk: qoriq: Don't allow CPU clocks higher than starting value

From: Scott Wood <oss@buserror.net>

commit 7c1c5413a7bdf1c9adc8d979521f1b8286366aef upstream.

The boot-time frequency of a CPU is considered its rated maximum, as we
have no other source of such information.  However, this was previously
only used for chips with 80% restrictions on secondary PLLs.  This
usually wasn't a problem because most chips/configs boot with a divider
of /1, with other dividers being used only for dynamic frequency
reduction.  However, at least one config (LS1021A at less than 1 GHz)
uses a different divider for top speed.  This was causing cpufreq to set
a frequency beyond the chip's rated speed.

This is fixed by applying a 100%-of-initial-speed limit to all CPU PLLs,
similar to the existing 80% limit that only applied to some.

Signed-off-by: Scott Wood <oss@buserror.net>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/clk/clk-qoriq.c |   13 ++++++++-----
 1 file changed, 8 insertions(+), 5 deletions(-)

--- a/drivers/clk/clk-qoriq.c
+++ b/drivers/clk/clk-qoriq.c
@@ -700,6 +700,7 @@ static struct clk * __init create_mux_co
 					     struct mux_hwclock *hwc,
 					     const struct clk_ops *ops,
 					     unsigned long min_rate,
+					     unsigned long max_rate,
 					     unsigned long pct80_rate,
 					     const char *fmt, int idx)
 {
@@ -728,6 +729,8 @@ static struct clk * __init create_mux_co
 			continue;
 		if (rate < min_rate)
 			continue;
+		if (rate > max_rate)
+			continue;
 
 		parent_names[j] = div->name;
 		hwc->parent_to_clksel[j] = i;
@@ -759,7 +762,7 @@ static struct clk * __init create_one_cm
 	struct mux_hwclock *hwc;
 	const struct clockgen_pll_div *div;
 	unsigned long plat_rate, min_rate;
-	u64 pct80_rate;
+	u64 max_rate, pct80_rate;
 	u32 clksel;
 
 	hwc = kzalloc(sizeof(*hwc), GFP_KERNEL);
@@ -787,8 +790,8 @@ static struct clk * __init create_one_cm
 		return NULL;
 	}
 
-	pct80_rate = clk_get_rate(div->clk);
-	pct80_rate *= 8;
+	max_rate = clk_get_rate(div->clk);
+	pct80_rate = max_rate * 8;
 	do_div(pct80_rate, 10);
 
 	plat_rate = clk_get_rate(cg->pll[PLATFORM_PLL].div[PLL_DIV1].clk);
@@ -798,7 +801,7 @@ static struct clk * __init create_one_cm
 	else
 		min_rate = plat_rate / 2;
 
-	return create_mux_common(cg, hwc, &cmux_ops, min_rate,
+	return create_mux_common(cg, hwc, &cmux_ops, min_rate, max_rate,
 				 pct80_rate, "cg-cmux%d", idx);
 }
 
@@ -813,7 +816,7 @@ static struct clk * __init create_one_hw
 	hwc->reg = cg->regs + 0x20 * idx + 0x10;
 	hwc->info = cg->info.hwaccel[idx];
 
-	return create_mux_common(cg, hwc, &hwaccel_ops, 0, 0,
+	return create_mux_common(cg, hwc, &hwaccel_ops, 0, ULONG_MAX, 0,
 				 "cg-hwaccel%d", idx);
 }
 


Patches currently in stable-queue which might be from oss@buserror.net are

queue-4.4/clk-qoriq-don-t-allow-cpu-clocks-higher-than-starting-value.patch