From: Maxim Sloyko <maxims@google.com>
To: sjg@chromium.org
Cc: openbmc@lists.ozlabs.org, Maxim Sloyko <maxims@google.com>
Subject: [PATCH u-boot v1 2/6] aspeed: Fix FUC/FUN typo in SCU
Date: Wed, 23 Nov 2016 11:49:58 -0800 [thread overview]
Message-ID: <1479930602-91012-2-git-send-email-maxims@google.com> (raw)
In-Reply-To: <1479930602-91012-1-git-send-email-maxims@google.com>
Change FUC to FUN in SCU registers naming, which was a typo that go out
of hand
Signed-off-by: Maxim Sloyko <maxims@google.com>
---
arch/arm/include/asm/arch-aspeed/regs-scu.h | 64 ++++++++++++++---------------
arch/arm/mach-aspeed/ast-scu.c | 2 +-
2 files changed, 33 insertions(+), 33 deletions(-)
diff --git a/arch/arm/include/asm/arch-aspeed/regs-scu.h b/arch/arm/include/asm/arch-aspeed/regs-scu.h
index b714fa9..5445023 100644
--- a/arch/arm/include/asm/arch-aspeed/regs-scu.h
+++ b/arch/arm/include/asm/arch-aspeed/regs-scu.h
@@ -830,49 +830,49 @@
/* AST_SCU_FUN_PIN_CTRL5 0x90 - Multi-function Pin Control#5 */
#define SCU_FUN_PIN_SPICS1 (0x1 << 31)
#define SCU_FUN_PIN_LPC_PLUS (0x1 << 30)
-#define SCU_FUC_PIN_USB20_HOST (0x1 << 29)
-#define SCU_FUC_PIN_USB11_PORT4 (0x1 << 28)
-#define SCU_FUC_PIN_I2C14 (0x1 << 27)
-#define SCU_FUC_PIN_I2C13 (0x1 << 26)
-#define SCU_FUC_PIN_I2C12 (0x1 << 25)
-#define SCU_FUC_PIN_I2C11 (0x1 << 24)
-#define SCU_FUC_PIN_I2C10 (0x1 << 23)
-#define SCU_FUC_PIN_I2C9 (0x1 << 22)
-#define SCU_FUC_PIN_I2C8 (0x1 << 21)
-#define SCU_FUC_PIN_I2C7 (0x1 << 20)
-#define SCU_FUC_PIN_I2C6 (0x1 << 19)
-#define SCU_FUC_PIN_I2C5 (0x1 << 18)
-#define SCU_FUC_PIN_I2C4 (0x1 << 17)
-#define SCU_FUC_PIN_I2C3 (0x1 << 16)
-#define SCU_FUC_PIN_MII2_RX_DWN_DIS (0x1 << 15)
-#define SCU_FUC_PIN_MII2_TX_DWN_DIS (0x1 << 14)
-#define SCU_FUC_PIN_MII1_RX_DWN_DIS (0x1 << 13)
-#define SCU_FUC_PIN_MII1_TX_DWN_DIS (0x1 << 12)
-
-#define SCU_FUC_PIN_MII2_TX_DRIV(x) (x << 10)
-#define SCU_FUC_PIN_MII2_TX_DRIV_MASK (0x3 << 10)
-#define SCU_FUC_PIN_MII1_TX_DRIV(x) (x << 8)
-#define SCU_FUC_PIN_MII1_TX_DRIV_MASK (0x3 << 8)
+#define SCU_FUN_PIN_USB20_HOST (0x1 << 29)
+#define SCU_FUN_PIN_USB11_PORT4 (0x1 << 28)
+#define SCU_FUN_PIN_I2C14 (0x1 << 27)
+#define SCU_FUN_PIN_I2C13 (0x1 << 26)
+#define SCU_FUN_PIN_I2C12 (0x1 << 25)
+#define SCU_FUN_PIN_I2C11 (0x1 << 24)
+#define SCU_FUN_PIN_I2C10 (0x1 << 23)
+#define SCU_FUN_PIN_I2C9 (0x1 << 22)
+#define SCU_FUN_PIN_I2C8 (0x1 << 21)
+#define SCU_FUN_PIN_I2C7 (0x1 << 20)
+#define SCU_FUN_PIN_I2C6 (0x1 << 19)
+#define SCU_FUN_PIN_I2C5 (0x1 << 18)
+#define SCU_FUN_PIN_I2C4 (0x1 << 17)
+#define SCU_FUN_PIN_I2C3 (0x1 << 16)
+#define SCU_FUN_PIN_MII2_RX_DWN_DIS (0x1 << 15)
+#define SCU_FUN_PIN_MII2_TX_DWN_DIS (0x1 << 14)
+#define SCU_FUN_PIN_MII1_RX_DWN_DIS (0x1 << 13)
+#define SCU_FUN_PIN_MII1_TX_DWN_DIS (0x1 << 12)
+
+#define SCU_FUN_PIN_MII2_TX_DRIV(x) (x << 10)
+#define SCU_FUN_PIN_MII2_TX_DRIV_MASK (0x3 << 10)
+#define SCU_FUN_PIN_MII1_TX_DRIV(x) (x << 8)
+#define SCU_FUN_PIN_MII1_TX_DRIV_MASK (0x3 << 8)
#define MII_NORMAL_DRIV 0x0
#define MII_HIGH_DRIV 0x2
-#define SCU_FUC_PIN_UART6 (0x1 << 7)
-#define SCU_FUC_PIN_ROM_16BIT (0x1 << 6)
-#define SCU_FUC_PIN_DIGI_V_OUT(x) (x)
-#define SCU_FUC_PIN_DIGI_V_OUT_MASK (0x3)
+#define SCU_FUN_PIN_UART6 (0x1 << 7)
+#define SCU_FUN_PIN_ROM_16BIT (0x1 << 6)
+#define SCU_FUN_PIN_DIGI_V_OUT(x) (x)
+#define SCU_FUN_PIN_DIGI_V_OUT_MASK (0x3)
#define VIDEO_DISABLE 0x0
#define VIDEO_12BITS 0x1
#define VIDEO_24BITS 0x2
//#define VIDEO_DISABLE 0x3
-#define SCU_FUC_PIN_USB11_PORT2 (0x1 << 3)
-#define SCU_FUC_PIN_SD1_8BIT (0x1 << 3)
+#define SCU_FUN_PIN_USB11_PORT2 (0x1 << 3)
+#define SCU_FUN_PIN_SD1_8BIT (0x1 << 3)
-#define SCU_FUC_PIN_MAC1_MDIO (0x1 << 2)
-#define SCU_FUC_PIN_SD2 (0x1 << 1)
-#define SCU_FUC_PIN_SD1 (0x1 << 0)
+#define SCU_FUN_PIN_MAC1_MDIO (0x1 << 2)
+#define SCU_FUN_PIN_SD2 (0x1 << 1)
+#define SCU_FUN_PIN_SD1 (0x1 << 0)
/* AST_SCU_FUN_PIN_CTRL6 0x94 - Multi-function Pin Control#6*/
diff --git a/arch/arm/mach-aspeed/ast-scu.c b/arch/arm/mach-aspeed/ast-scu.c
index 0cc0d67..280c421 100644
--- a/arch/arm/mach-aspeed/ast-scu.c
+++ b/arch/arm/mach-aspeed/ast-scu.c
@@ -394,7 +394,7 @@ void ast_scu_multi_func_eth(u8 num)
AST_SCU_FUN_PIN_CTRL1);
ast_scu_write(ast_scu_read(AST_SCU_FUN_PIN_CTRL5) |
- SCU_FUC_PIN_MAC1_MDIO,
+ SCU_FUN_PIN_MAC1_MDIO,
AST_SCU_FUN_PIN_CTRL5);
break;
--
2.8.0.rc3.226.g39d4020
next prev parent reply other threads:[~2016-11-23 19:50 UTC|newest]
Thread overview: 56+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-11-22 23:56 [PATCH u-boot 0/5] Aspeed I2C driver, using Driver Model maxims
2016-11-22 23:56 ` [U-Boot] " maxims at google.com
2016-11-22 23:56 ` [PATCH u-boot 1/5] aspeed/g5: Device Tree for ast2500, copied from openbmc/linux (include file), plus minimal device tree configuration for ast2500 eval board maxims
2016-11-22 23:56 ` [U-Boot] " maxims at google.com
2016-11-23 16:13 ` Simon Glass
2016-11-23 16:23 ` Simon Glass
2016-11-23 16:23 ` [U-Boot] " Simon Glass
2016-11-22 23:56 ` [PATCH u-boot 2/5] aspeed: Fixed incosistency in some SCU registers naming maxims
2016-11-22 23:56 ` [U-Boot] " maxims at google.com
2016-11-23 16:13 ` Simon Glass
2016-11-23 16:24 ` Simon Glass
2016-11-23 16:24 ` [U-Boot] " Simon Glass
2016-11-22 23:56 ` [PATCH u-boot 3/5] aspeed: Added function to calculate APB Clock frequency maxims
2016-11-22 23:56 ` [U-Boot] " maxims at google.com
2016-11-23 16:13 ` Simon Glass
2016-11-23 16:24 ` Simon Glass
2016-11-23 16:24 ` [U-Boot] " Simon Glass
2016-11-23 17:59 ` Maxim Sloyko
2016-11-22 23:56 ` [PATCH u-boot 4/5] aspeed: Added function to configure pins for I2C devices maxims
2016-11-22 23:56 ` [U-Boot] " maxims at google.com
2016-11-23 16:13 ` Simon Glass
2016-11-23 16:24 ` Simon Glass
2016-11-23 16:24 ` [U-Boot] " Simon Glass
2016-11-23 18:06 ` Maxim Sloyko
2016-11-22 23:56 ` [PATCH u-boot 5/5] aspeed: I2C driver maxims
2016-11-22 23:56 ` [U-Boot] " maxims at google.com
2016-11-23 16:13 ` Simon Glass
2016-11-23 16:24 ` Simon Glass
2016-11-23 16:24 ` [U-Boot] " Simon Glass
2016-11-23 19:15 ` Maxim Sloyko
2016-11-23 12:28 ` [U-Boot] [PATCH u-boot 0/5] Aspeed I2C driver, using Driver Model Heiko Schocher
2016-11-23 12:28 ` Heiko Schocher
2016-11-23 16:40 ` Maxim Sloyko
2016-11-24 5:19 ` Heiko Schocher
2016-11-23 19:49 ` [PATCH u-boot v1 1/6] aspeed/g5: Device Tree for ast2500, copied from openbmc/linux (include file), plus minimal device tree configuration for ast2500 eval board Maxim Sloyko
2016-11-23 19:49 ` Maxim Sloyko [this message]
2016-11-23 20:26 ` [PATCH u-boot v1 2/6] aspeed: Fix FUC/FUN typo in SCU Simon Glass
2016-11-23 19:49 ` [PATCH u-boot v1 3/6] aspeed/scu: Add definitions needed to configure pins for I2C Maxim Sloyko
2016-11-23 20:26 ` Simon Glass
2016-11-23 19:50 ` [PATCH u-boot v1 4/6] aspeed: Add function to calculate APB Clock frequency Maxim Sloyko
2016-11-23 20:26 ` Simon Glass
2016-11-23 19:50 ` [PATCH u-boot v1 5/6] aspeed: Add function to configure pins for I2C devices Maxim Sloyko
2016-11-23 20:26 ` Simon Glass
2016-11-23 19:50 ` [PATCH u-boot v1 6/6] aspeed: I2C driver Maxim Sloyko
2016-11-23 20:26 ` Simon Glass
2016-11-24 0:04 ` Maxim Sloyko
2016-11-23 20:26 ` [PATCH u-boot v1 1/6] aspeed/g5: Device Tree for ast2500, copied from openbmc/linux (include file), plus minimal device tree configuration for ast2500 eval board Simon Glass
2016-11-24 0:28 ` [PATCH u-boot v2 " Maxim Sloyko
2016-11-24 0:28 ` [PATCH u-boot v2 2/6] aspeed: Fix FUC/FUN typo in SCU Maxim Sloyko
2016-11-24 0:28 ` [PATCH u-boot v2 3/6] aspeed/scu: Add definitions needed to configure pins for I2C Maxim Sloyko
2016-11-27 17:02 ` Simon Glass
2016-11-24 0:28 ` [PATCH u-boot v2 4/6] aspeed: Add function to calculate APB Clock frequency Maxim Sloyko
2016-11-27 17:02 ` Simon Glass
2016-11-24 0:28 ` [PATCH u-boot v2 5/6] aspeed: Add function to configure pins for I2C devices Maxim Sloyko
2016-11-24 0:28 ` [PATCH u-boot v2 6/6] aspeed: I2C driver Maxim Sloyko
2016-11-27 17:02 ` Simon Glass
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1479930602-91012-2-git-send-email-maxims@google.com \
--to=maxims@google.com \
--cc=openbmc@lists.ozlabs.org \
--cc=sjg@chromium.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.