All of lore.kernel.org
 help / color / mirror / Atom feed
From: Brian Starkey <brian.starkey@arm.com>
To: dri-devel@lists.freedesktop.org, linux-kernel@vger.kernel.org
Cc: liviu.dudau@arm.com, laurent.pinchart@ideasonboard.com,
	linux-media@vger.kernel.org
Subject: [RFC PATCH v3 0/6] Introduce writeback connectors
Date: Fri, 25 Nov 2016 16:48:58 +0000	[thread overview]
Message-ID: <1480092544-1725-1-git-send-email-brian.starkey@arm.com> (raw)

Hi,

This is v3 of my series introducing a new connector type:
 DRM_MODE_CONNECTOR_WRITEBACK
See v1 and v2 here: [1] [2]

Writeback connectors are used to expose the memory writeback engines
found in some display controllers, which can write a CRTC's
composition result to a memory buffer.
This is useful e.g. for testing, screen-recording, screenshots,
wireless display, display cloning, memory-to-memory composition.

Writeback connectors are given a WRITEBACK_FB_ID property (which acts
slightly differently to FB_ID, so gets a new name), as well as
a PIXEL_FORMATS blob to list the supported writeback formats, and
OUT_FENCE_PTR to be used for out-fences.

The changes since v2 are in the commit messages of each commit.

The main differences are:
 - Subclass drm_connector as drm_writeback_connector
 - Slight relaxation of core checks, to allow
   (connector->crtc && !connector->fb)
 - Dropped PIXEL_FORMATS_SIZE, which was redundant
 - Reworked the event interface, drivers don't need to deal with the
   fence directly
 - Re-ordered the commits to introduce writeback out-fences up-front.

I've kept RFC on this series because the event reporting (introduction
of drm_writeback_job) is probably up for debate.

v4 will be accompanied by igt tests.

As always, I look forward to any comments.

Thanks,
Brian

[1] http://www.mail-archive.com/linux-kernel@vger.kernel.org/msg1247574.html
[2] http://www.mail-archive.com/linux-kernel@vger.kernel.org/msg1258017.html

---

Brian Starkey (5):
  drm: Add writeback connector type
  drm: writeback: Add out-fences for writeback connectors
  drm: mali-dp: Rename malidp_input_format
  drm: mali-dp: Add RGB writeback formats for DP550/DP650
  drm: mali-dp: Add writeback connector

Liviu Dudau (1):
  drm: mali-dp: Add support for writeback on DP550/DP650

 Documentation/gpu/drm-kms.rst       |    9 +
 drivers/gpu/drm/Makefile            |    2 +-
 drivers/gpu/drm/arm/Makefile        |    1 +
 drivers/gpu/drm/arm/malidp_crtc.c   |   21 +++
 drivers/gpu/drm/arm/malidp_drv.c    |   25 ++-
 drivers/gpu/drm/arm/malidp_drv.h    |    3 +
 drivers/gpu/drm/arm/malidp_hw.c     |  111 ++++++++----
 drivers/gpu/drm/arm/malidp_hw.h     |   27 ++-
 drivers/gpu/drm/arm/malidp_mw.c     |  278 ++++++++++++++++++++++++++++++
 drivers/gpu/drm/arm/malidp_mw.h     |   18 ++
 drivers/gpu/drm/arm/malidp_planes.c |    8 +-
 drivers/gpu/drm/arm/malidp_regs.h   |   15 ++
 drivers/gpu/drm/drm_atomic.c        |  226 +++++++++++++++++++++++-
 drivers/gpu/drm/drm_atomic_helper.c |    6 +
 drivers/gpu/drm/drm_connector.c     |    4 +-
 drivers/gpu/drm/drm_writeback.c     |  325 +++++++++++++++++++++++++++++++++++
 include/drm/drm_atomic.h            |   11 ++
 include/drm/drm_connector.h         |   13 ++
 include/drm/drm_mode_config.h       |   14 ++
 include/drm/drm_writeback.h         |  115 +++++++++++++
 include/uapi/drm/drm_mode.h         |    1 +
 21 files changed, 1181 insertions(+), 52 deletions(-)
 create mode 100644 drivers/gpu/drm/arm/malidp_mw.c
 create mode 100644 drivers/gpu/drm/arm/malidp_mw.h
 create mode 100644 drivers/gpu/drm/drm_writeback.c
 create mode 100644 include/drm/drm_writeback.h

-- 
1.7.9.5

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

WARNING: multiple messages have this Message-ID (diff)
From: Brian Starkey <brian.starkey@arm.com>
To: dri-devel@lists.freedesktop.org, linux-kernel@vger.kernel.org
Cc: linux-media@vger.kernel.org, daniel@ffwll.ch,
	gustavo@padovan.org, laurent.pinchart@ideasonboard.com,
	eric@anholt.net, ville.syrjala@linux.intel.com,
	liviu.dudau@arm.com
Subject: [RFC PATCH v3 0/6] Introduce writeback connectors
Date: Fri, 25 Nov 2016 16:48:58 +0000	[thread overview]
Message-ID: <1480092544-1725-1-git-send-email-brian.starkey@arm.com> (raw)

Hi,

This is v3 of my series introducing a new connector type:
 DRM_MODE_CONNECTOR_WRITEBACK
See v1 and v2 here: [1] [2]

Writeback connectors are used to expose the memory writeback engines
found in some display controllers, which can write a CRTC's
composition result to a memory buffer.
This is useful e.g. for testing, screen-recording, screenshots,
wireless display, display cloning, memory-to-memory composition.

Writeback connectors are given a WRITEBACK_FB_ID property (which acts
slightly differently to FB_ID, so gets a new name), as well as
a PIXEL_FORMATS blob to list the supported writeback formats, and
OUT_FENCE_PTR to be used for out-fences.

The changes since v2 are in the commit messages of each commit.

The main differences are:
 - Subclass drm_connector as drm_writeback_connector
 - Slight relaxation of core checks, to allow
   (connector->crtc && !connector->fb)
 - Dropped PIXEL_FORMATS_SIZE, which was redundant
 - Reworked the event interface, drivers don't need to deal with the
   fence directly
 - Re-ordered the commits to introduce writeback out-fences up-front.

I've kept RFC on this series because the event reporting (introduction
of drm_writeback_job) is probably up for debate.

v4 will be accompanied by igt tests.

As always, I look forward to any comments.

Thanks,
Brian

[1] http://www.mail-archive.com/linux-kernel@vger.kernel.org/msg1247574.html
[2] http://www.mail-archive.com/linux-kernel@vger.kernel.org/msg1258017.html

---

Brian Starkey (5):
  drm: Add writeback connector type
  drm: writeback: Add out-fences for writeback connectors
  drm: mali-dp: Rename malidp_input_format
  drm: mali-dp: Add RGB writeback formats for DP550/DP650
  drm: mali-dp: Add writeback connector

Liviu Dudau (1):
  drm: mali-dp: Add support for writeback on DP550/DP650

 Documentation/gpu/drm-kms.rst       |    9 +
 drivers/gpu/drm/Makefile            |    2 +-
 drivers/gpu/drm/arm/Makefile        |    1 +
 drivers/gpu/drm/arm/malidp_crtc.c   |   21 +++
 drivers/gpu/drm/arm/malidp_drv.c    |   25 ++-
 drivers/gpu/drm/arm/malidp_drv.h    |    3 +
 drivers/gpu/drm/arm/malidp_hw.c     |  111 ++++++++----
 drivers/gpu/drm/arm/malidp_hw.h     |   27 ++-
 drivers/gpu/drm/arm/malidp_mw.c     |  278 ++++++++++++++++++++++++++++++
 drivers/gpu/drm/arm/malidp_mw.h     |   18 ++
 drivers/gpu/drm/arm/malidp_planes.c |    8 +-
 drivers/gpu/drm/arm/malidp_regs.h   |   15 ++
 drivers/gpu/drm/drm_atomic.c        |  226 +++++++++++++++++++++++-
 drivers/gpu/drm/drm_atomic_helper.c |    6 +
 drivers/gpu/drm/drm_connector.c     |    4 +-
 drivers/gpu/drm/drm_writeback.c     |  325 +++++++++++++++++++++++++++++++++++
 include/drm/drm_atomic.h            |   11 ++
 include/drm/drm_connector.h         |   13 ++
 include/drm/drm_mode_config.h       |   14 ++
 include/drm/drm_writeback.h         |  115 +++++++++++++
 include/uapi/drm/drm_mode.h         |    1 +
 21 files changed, 1181 insertions(+), 52 deletions(-)
 create mode 100644 drivers/gpu/drm/arm/malidp_mw.c
 create mode 100644 drivers/gpu/drm/arm/malidp_mw.h
 create mode 100644 drivers/gpu/drm/drm_writeback.c
 create mode 100644 include/drm/drm_writeback.h

-- 
1.7.9.5


             reply	other threads:[~2016-11-25 16:49 UTC|newest]

Thread overview: 37+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-11-25 16:48 Brian Starkey [this message]
2016-11-25 16:48 ` [RFC PATCH v3 0/6] Introduce writeback connectors Brian Starkey
2016-11-25 16:48 ` [PATCH 1/6] drm: Add writeback connector type Brian Starkey
2016-11-25 16:48   ` Brian Starkey
2017-04-14 10:08   ` Boris Brezillon
2017-04-18 17:34     ` Brian Starkey
2017-04-18 17:34       ` Brian Starkey
2017-04-18 19:57       ` Boris Brezillon
2017-04-19  9:51         ` Brian Starkey
2017-04-19 11:34           ` Boris Brezillon
2017-04-19 11:34             ` Boris Brezillon
2017-04-19 12:50             ` Brian Starkey
2017-04-19 12:50               ` Brian Starkey
2017-05-05  8:22   ` Boris Brezillon
2017-05-05  8:22     ` Boris Brezillon
2017-05-05 12:47     ` Liviu Dudau
2017-05-05 12:47       ` Liviu Dudau
2016-11-25 16:49 ` [PATCH 2/6] drm: writeback: Add out-fences for writeback connectors Brian Starkey
2016-11-25 16:49   ` Brian Starkey
2017-04-14 10:11   ` Boris Brezillon
2017-04-14 10:11     ` Boris Brezillon
2017-04-18 17:35     ` Brian Starkey
2017-04-18 17:35       ` Brian Starkey
2016-11-25 16:49 ` [PATCH 3/6] drm: mali-dp: Rename malidp_input_format Brian Starkey
2016-11-25 16:49   ` Brian Starkey
2016-11-25 16:49 ` [PATCH 4/6] drm: mali-dp: Add support for writeback on DP550/DP650 Brian Starkey
2016-11-25 16:49   ` Brian Starkey
2016-11-25 16:49 ` [PATCH 5/6] drm: mali-dp: Add RGB writeback formats for DP550/DP650 Brian Starkey
2016-11-25 16:49   ` Brian Starkey
2016-11-25 16:49 ` [PATCH 6/6] drm: mali-dp: Add writeback connector Brian Starkey
2017-04-14  9:47   ` Boris Brezillon
2017-04-14  9:47     ` Boris Brezillon
2017-04-18 17:35     ` Brian Starkey
2017-04-18 17:35       ` Brian Starkey
2017-04-14  9:35 ` [RFC PATCH v3 0/6] Introduce writeback connectors Boris Brezillon
2017-04-14  9:35   ` Boris Brezillon
2017-04-18 17:31   ` Brian Starkey

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1480092544-1725-1-git-send-email-brian.starkey@arm.com \
    --to=brian.starkey@arm.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=laurent.pinchart@ideasonboard.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=liviu.dudau@arm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.