From: Jagan Teki <jagan@openedev.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v3 04/13] dm: net: fec: Add .read_rom_hwaddr
Date: Tue, 6 Dec 2016 00:00:51 +0100 [thread overview]
Message-ID: <1480978860-4351-5-git-send-email-jagan@openedev.com> (raw)
In-Reply-To: <1480978860-4351-1-git-send-email-jagan@openedev.com>
From: Jagan Teki <jagan@amarulasolutions.com>
Add .read_rom_hwaddr on dm eth_ops.
Cc: Stefano Babic <sbabic@denx.de>
Cc: Matteo Lisi <matteo.lisi@engicam.com>
Cc: Michael Trimarchi <michael@amarulasolutions.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
drivers/net/fec_mxc.c | 18 +++++++++---------
1 file changed, 9 insertions(+), 9 deletions(-)
diff --git a/drivers/net/fec_mxc.c b/drivers/net/fec_mxc.c
index 2c4be96..3304fddc 100644
--- a/drivers/net/fec_mxc.c
+++ b/drivers/net/fec_mxc.c
@@ -1165,12 +1165,21 @@ int fecmxc_register_mii_postcall(struct eth_device *dev, int (*cb)(int))
#else
+static int fecmxc_read_rom_hwaddr(struct udevice *dev)
+{
+ struct fec_priv *priv = dev_get_priv(dev);
+ struct eth_pdata *pdata = dev_get_platdata(dev);
+
+ return fec_get_hwaddr(priv->dev_id, pdata->enetaddr);
+}
+
static const struct eth_ops fecmxc_ops = {
.start = fecmxc_init,
.send = fecmxc_send,
.recv = fecmxc_recv,
.stop = fecmxc_halt,
.write_hwaddr = fecmxc_set_hwaddr,
+ .read_rom_hwaddr = fecmxc_read_rom_hwaddr,
};
static int fec_phy_init(struct fec_priv *priv, struct udevice *dev)
@@ -1200,7 +1209,6 @@ static int fecmxc_probe(struct udevice *dev)
struct fec_priv *priv = dev_get_priv(dev);
struct mii_dev *bus = NULL;
int dev_id = -1;
- unsigned char ethaddr[6];
uint32_t start;
int ret;
@@ -1235,14 +1243,6 @@ static int fecmxc_probe(struct udevice *dev)
fec_set_dev_name((char *)dev->name, dev_id);
priv->dev_id = (dev_id == -1) ? 0 : dev_id;
- ret = fec_get_hwaddr(dev_id, ethaddr);
- if (!ret) {
- debug("got MAC%d address from fuse: %pM\n", dev_id, ethaddr);
- memcpy(pdata->enetaddr, ethaddr, 6);
- if (!getenv("ethaddr"))
- eth_setenv_enetaddr("ethaddr", ethaddr);
- }
-
return 0;
err_timeout:
--
1.9.1
next prev parent reply other threads:[~2016-12-05 23:00 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-12-05 23:00 [U-Boot] [PATCH v3 00/13] imx6: icorem6: Add dm-eth, framebuffer and I2C support Jagan Teki
2016-12-05 23:00 ` [U-Boot] [PATCH v3 01/13] net: fec_mxc: Remove unneeded eth_device arg from fec_get_hwaddr Jagan Teki
2016-12-05 23:00 ` [U-Boot] [PATCH v3 02/13] net: fec_mxc: Convert into driver model Jagan Teki
2016-12-09 18:22 ` Joe Hershberger
2016-12-09 22:26 ` Jagan Teki
2016-12-05 23:00 ` [U-Boot] [PATCH v3 03/13] net: fec_mxc: Driver cleanups Jagan Teki
2016-12-05 23:00 ` Jagan Teki [this message]
2016-12-05 23:00 ` [U-Boot] [PATCH v3 05/13] ARM: dts: imx6qdl-icore: Add FEC support Jagan Teki
2016-12-05 23:00 ` [U-Boot] [PATCH v3 06/13] icorem6: Use CONFIG_DM_ETH support Jagan Teki
2016-12-05 23:00 ` [U-Boot] [PATCH v3 07/13] video: Kconfig: Add VIDEO_IPV3 entry Jagan Teki
2016-12-05 23:00 ` [U-Boot] [PATCH v3 08/13] imx6: icorem6: Add framebuffer support Jagan Teki
2016-12-05 23:00 ` [U-Boot] [PATCH v3 09/13] imx6: icorem6: Add custom splashscreen support Jagan Teki
2016-12-05 23:00 ` [U-Boot] [PATCH v3 10/13] i2c: Kconfig: Add SYS_I2C_MXC entry Jagan Teki
2016-12-06 14:06 ` Heiko Schocher
2016-12-06 15:45 ` Jagan Teki
2016-12-06 14:47 ` Fabio Estevam
2016-12-06 15:44 ` Jagan Teki
2016-12-05 23:00 ` [U-Boot] [PATCH v3 11/13] i2c: mxc: Print hex instead of decimal for bus address Jagan Teki
2016-12-06 14:07 ` Heiko Schocher
2016-12-05 23:00 ` [U-Boot] [PATCH v3 12/13] i2c: mxc: Make 'no gpio pinctrl state' print as debug Jagan Teki
2016-12-06 14:08 ` Heiko Schocher
2016-12-05 23:01 ` [U-Boot] [PATCH v3 13/13] imx6: icorem6: Add I2C support Jagan Teki
2016-12-06 14:10 ` Heiko Schocher
2016-12-06 17:25 ` Jagan Teki
2016-12-07 16:01 ` [U-Boot] [PATCH v3 00/13] imx6: icorem6: Add dm-eth, framebuffer and " Jagan Teki
2016-12-13 12:36 ` Jagan Teki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1480978860-4351-5-git-send-email-jagan@openedev.com \
--to=jagan@openedev.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.