From: christopher.lee.bostic@gmail.com (Chris Bostic)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 15/16] drivers/fsi: Add documentation for GPIO bindings
Date: Tue, 6 Dec 2016 18:14:36 -0600 [thread overview]
Message-ID: <1481069677-53660-16-git-send-email-christopher.lee.bostic@gmail.com> (raw)
In-Reply-To: <1481069677-53660-1-git-send-email-christopher.lee.bostic@gmail.com>
From: Chris Bostic <cbostic@us.ibm.com>
Add fsi master gpio device tree binding documentation
Signed-off-by: Chris Bostic <cbostic@us.ibm.com>
---
.../devicetree/bindings/fsi/fsi-master-gpio.txt | 21 +++++++++++++++++++++
1 file changed, 21 insertions(+)
create mode 100644 Documentation/devicetree/bindings/fsi/fsi-master-gpio.txt
diff --git a/Documentation/devicetree/bindings/fsi/fsi-master-gpio.txt b/Documentation/devicetree/bindings/fsi/fsi-master-gpio.txt
new file mode 100644
index 0000000..ff3a62e
--- /dev/null
+++ b/Documentation/devicetree/bindings/fsi/fsi-master-gpio.txt
@@ -0,0 +1,21 @@
+Device-tree bindings for gpio-based FSI master driver
+-----------------------------------------------------
+
+Required properties:
+ - compatible = "ibm,fsi-master-gpio";
+ - clk-gpios;
+ - data-gpios;
+
+Optional properties:
+ - enable-gpios;
+ - trans-gpios;
+ - mux-gpios;
+
+fsi-master {
+ compatible = "ibm,fsi-master", "ibm,fsi-master-gpio";
+ clk-gpios = <&gpio 0 &gpio 6>;
+ data-gpios = <&gpio 1 &gpio 7>;
+ enable-gpios = <&gpio 2 &gpio 8>; /* Enable FSI data in/out */
+ trans-gpios = <&gpio 3 &gpio 9>; /* Volts translator direction */
+ mux-gpios = <&gpio 4> &gpio 10>; /* Multiplexer for FSI pins */
+}
--
1.8.2.2
WARNING: multiple messages have this Message-ID (diff)
From: Chris Bostic <christopher.lee.bostic@gmail.com>
To: robh+dt@kernel.org, mark.rutland@arm.com, linux@armlinux.org.uk,
gregkh@linuxfoundation.org, sre@kernel.org,
mturquette@baylibre.com, geert+renesas@glider.be,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org
Cc: Chris Bostic <cbostic@us.ibm.com>,
joel@jms.id.au, jk@ozlabs.org, linux-kernel@vger.kernel.org,
andrew@aj.id.au, alistair@popple.id.au, benh@kernel.crashing.org
Subject: [PATCH 15/16] drivers/fsi: Add documentation for GPIO bindings
Date: Tue, 6 Dec 2016 18:14:36 -0600 [thread overview]
Message-ID: <1481069677-53660-16-git-send-email-christopher.lee.bostic@gmail.com> (raw)
In-Reply-To: <1481069677-53660-1-git-send-email-christopher.lee.bostic@gmail.com>
From: Chris Bostic <cbostic@us.ibm.com>
Add fsi master gpio device tree binding documentation
Signed-off-by: Chris Bostic <cbostic@us.ibm.com>
---
.../devicetree/bindings/fsi/fsi-master-gpio.txt | 21 +++++++++++++++++++++
1 file changed, 21 insertions(+)
create mode 100644 Documentation/devicetree/bindings/fsi/fsi-master-gpio.txt
diff --git a/Documentation/devicetree/bindings/fsi/fsi-master-gpio.txt b/Documentation/devicetree/bindings/fsi/fsi-master-gpio.txt
new file mode 100644
index 0000000..ff3a62e
--- /dev/null
+++ b/Documentation/devicetree/bindings/fsi/fsi-master-gpio.txt
@@ -0,0 +1,21 @@
+Device-tree bindings for gpio-based FSI master driver
+-----------------------------------------------------
+
+Required properties:
+ - compatible = "ibm,fsi-master-gpio";
+ - clk-gpios;
+ - data-gpios;
+
+Optional properties:
+ - enable-gpios;
+ - trans-gpios;
+ - mux-gpios;
+
+fsi-master {
+ compatible = "ibm,fsi-master", "ibm,fsi-master-gpio";
+ clk-gpios = <&gpio 0 &gpio 6>;
+ data-gpios = <&gpio 1 &gpio 7>;
+ enable-gpios = <&gpio 2 &gpio 8>; /* Enable FSI data in/out */
+ trans-gpios = <&gpio 3 &gpio 9>; /* Volts translator direction */
+ mux-gpios = <&gpio 4> &gpio 10>; /* Multiplexer for FSI pins */
+}
--
1.8.2.2
next prev parent reply other threads:[~2016-12-07 0:14 UTC|newest]
Thread overview: 49+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-12-07 0:14 [PATCH 00/16] FSI device driver introduction Chris Bostic
2016-12-07 0:14 ` Chris Bostic
2016-12-07 0:14 ` Chris Bostic
2016-12-07 0:14 ` [PATCH 01/16] drivers/fsi: Add empty fsi bus definitions Chris Bostic
2016-12-07 0:14 ` Chris Bostic
2016-12-07 0:14 ` Chris Bostic
2016-12-07 0:14 ` [PATCH 02/16] drivers/fsi: Add device & driver definitions Chris Bostic
2016-12-07 0:14 ` Chris Bostic
2016-12-07 0:14 ` Chris Bostic
2016-12-07 0:14 ` [PATCH 03/16] drivers/fsi: add driver to device matches Chris Bostic
2016-12-07 0:14 ` Chris Bostic
2016-12-07 0:14 ` Chris Bostic
2016-12-07 0:14 ` [PATCH 05/16] drivers/fsi: Add fake master driver Chris Bostic
2016-12-07 0:14 ` Chris Bostic
2016-12-07 12:09 ` Mark Rutland
2016-12-07 12:09 ` Mark Rutland
2016-12-07 12:09 ` Mark Rutland
2016-12-07 23:27 ` Jeremy Kerr
2016-12-07 23:27 ` Jeremy Kerr
2016-12-07 23:27 ` Jeremy Kerr
2016-12-07 0:14 ` [PATCH 06/16] drivers/fsi: Add slave definition Chris Bostic
2016-12-07 0:14 ` Chris Bostic
2016-12-07 0:14 ` [PATCH 07/16] drivers/fsi: Add empty master scan Chris Bostic
2016-12-07 0:14 ` Chris Bostic
2016-12-07 0:14 ` [PATCH 10/16] drivers/fsi: scan slaves & register devices Chris Bostic
2016-12-07 0:14 ` Chris Bostic
2016-12-07 0:14 ` Chris Bostic
2016-12-07 0:14 ` [PATCH 13/16] drivers/fsi: Set slave SMODE to init communication Chris Bostic
2016-12-07 0:14 ` Chris Bostic
2016-12-07 0:14 ` [PATCH 14/16] drivers/fsi: Add master unscan Chris Bostic
2016-12-07 0:14 ` Chris Bostic
2016-12-07 9:31 ` Greg KH
2016-12-07 9:31 ` Greg KH
2016-12-07 9:31 ` Greg KH
2016-12-07 0:14 ` Chris Bostic [this message]
2016-12-07 0:14 ` [PATCH 15/16] drivers/fsi: Add documentation for GPIO bindings Chris Bostic
2016-12-07 12:02 ` Mark Rutland
2016-12-07 12:02 ` Mark Rutland
2016-12-07 0:14 ` [PATCH 16/16] drivers/fsi: Add GPIO based FSI master Chris Bostic
2016-12-07 0:14 ` Chris Bostic
2016-12-09 4:12 ` Jeremy Kerr
2016-12-09 4:12 ` Jeremy Kerr
2016-12-09 4:12 ` Jeremy Kerr
2016-12-12 19:49 ` Christopher Bostic
2016-12-12 19:49 ` Christopher Bostic
2016-12-12 19:49 ` Christopher Bostic
2016-12-07 1:52 ` [PATCH 00/16] FSI device driver introduction Sebastian Reichel
2016-12-07 1:52 ` Sebastian Reichel
2016-12-07 1:52 ` Sebastian Reichel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1481069677-53660-16-git-send-email-christopher.lee.bostic@gmail.com \
--to=christopher.lee.bostic@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.