All of lore.kernel.org
 help / color / mirror / Atom feed
From: Archit Taneja <architt@codeaurora.org>
To: laurent.pinchart@ideasonboard.com
Cc: linux-arm-msm@vger.kernel.org, dri-devel@lists.freedesktop.org
Subject: [PATCH v5 1/2] dt-bindings: drm/bridge: adv7511: Add regulator bindings
Date: Wed, 11 Jan 2017 12:22:26 +0530	[thread overview]
Message-ID: <1484117547-26417-2-git-send-email-architt@codeaurora.org> (raw)
In-Reply-To: <1484117547-26417-1-git-send-email-architt@codeaurora.org>

Add the regulator supply properties needed by ADV7511 and ADV7533.

Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
---
v5:
- Bring back supplies for individual pins
- In v2, we had a v3p3-supply for DVDD_3V on ADV7511 and V3P3 pin
  on ADV7533. We don't really need to force a common name here
  (the adv7511 driver manages 2 different regulator name tables
  anyway).
  The supply on ADV7511 is called dvdd-3v-supply to match the
  pin name.

 .../devicetree/bindings/display/bridge/adi,adv7511.txt       | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt b/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt
index 6532a59..00ea670 100644
--- a/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt
+++ b/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt
@@ -38,10 +38,22 @@ The following input format properties are required except in "rgb 1x" and
 - adi,input-justification: The input bit justification ("left", "evenly",
   "right").
 
+- avdd-supply: A 1.8V supply that powers up the AVDD pin on the chip.
+- dvdd-supply: A 1.8V supply that powers up the DVDD pin on the chip.
+- pvdd-supply: A 1.8V supply that powers up the PVDD pin on the chip.
+- dvdd-3v-supply: A 3.3V supply that powers up the pin called DVDD_3V
+  on the chip.
+- bgvdd-supply: A 1.8V supply that powers up the BGVDD pin. This is
+  needed only for ADV7511.
+
 The following properties are required for ADV7533:
 
 - adi,dsi-lanes: Number of DSI data lanes connected to the DSI host. It should
   be one of 1, 2, 3 or 4.
+- a2vdd-supply: 1.8V supply that powers up the A2VDD pin on the chip.
+- v3p3-supply: A 3.3V supply that powers up the V3P3 pin on the chip.
+- v1p2-supply: A supply that powers up the V1P2 pin on the chip. It can be
+  either 1.2V or 1.8V.
 
 Optional properties:
 
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

  reply	other threads:[~2017-01-11  6:52 UTC|newest]

Thread overview: 52+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-08-31 10:52 [PATCH 0/3] arm64: apq8016-sbc: Enable regulators for ADV7533 Archit Taneja
     [not found] ` <1472640730-24326-1-git-send-email-architt-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2016-08-31 10:52   ` [PATCH 1/3] dt-bindings: drm/bridge: adv7511: Add " Archit Taneja
2016-09-02 15:56     ` Rob Herring
2016-09-06  4:22       ` Archit Taneja
2016-08-31 10:52 ` [PATCH 2/3] drm/bridge: adv7533: Initialize regulators Archit Taneja
2016-08-31 15:53   ` Laurent Pinchart
2016-08-31 16:54     ` Archit Taneja
2016-08-31 20:30       ` Laurent Pinchart
2016-09-01 10:09         ` Archit Taneja
2016-08-31 10:52 ` [PATCH 3/3] arm64: dts: apq8016-sbc: Set up LDO2, LDO6 and LDO17 regulator voltage ranges Archit Taneja
2016-08-31 20:54   ` Stephen Boyd
2016-09-01  6:12     ` Archit Taneja
2016-09-02  3:47     ` Bjorn Andersson
2016-09-23  9:20 ` [PATCH v2 0/4] arm64: apq8016-sbc: Enable regulators for ADV7533 Archit Taneja
2016-09-23  9:20   ` [PATCH v2 1/4] dt-bindings: drm/bridge: adv7511: Add regulator bindings Archit Taneja
2016-09-23 22:31     ` Rob Herring
     [not found]     ` <1474622430-6704-2-git-send-email-architt-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2016-09-25 17:28       ` Laurent Pinchart
2016-09-26  6:40         ` Archit Taneja
2016-09-26  8:12           ` Laurent Pinchart
2016-10-14  5:40             ` Archit Taneja
2016-11-10  1:34               ` Rob Herring
     [not found]                 ` <CAL_Jsq+KMPoyWvh1U3OKL6pX8D4QByqVFgcMks8myDfZEYeFCg-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2016-11-15  3:35                   ` Archit Taneja
2016-09-23  9:20   ` [PATCH v2 2/4] drm/bridge: adv7511: Initialize regulators Archit Taneja
2016-09-25 17:35     ` Laurent Pinchart
2016-09-26  6:40       ` Archit Taneja
2016-09-23  9:20   ` [PATCH v2 3/4] arm64: dts: apq8016-sbc: Add some missing regulator supplies for ADV7533 Archit Taneja
2016-09-23  9:20   ` [PATCH v2 4/4] arm64: dts: apq8016-sbc: Set up LDO2, LDO6 and LDO17 regulator voltage ranges Archit Taneja
2016-11-29  6:07   ` [PATCH v3 0/2] drm/bridge: adv7511: Enable regulators Archit Taneja
     [not found]     ` <1480399662-8858-1-git-send-email-architt-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2016-11-29  6:07       ` [PATCH v3 1/2] dt-bindings: drm/bridge: adv7511: Add regulator bindings Archit Taneja
     [not found]         ` <1480399662-8858-2-git-send-email-architt-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2016-11-29  6:33           ` Laurent Pinchart
2016-11-29  8:11             ` Archit Taneja
2016-11-29  9:11               ` Laurent Pinchart
2016-11-29 11:01                 ` Mark Brown
2016-11-29 19:37                   ` Laurent Pinchart
2016-11-30 16:14                     ` Mark Brown
2016-12-05 21:11                 ` Bjorn Andersson
2016-12-05 21:16                   ` Laurent Pinchart
2016-12-06 10:05                     ` Mark Brown
2016-12-06 12:46                       ` Laurent Pinchart
2016-12-06 13:20                         ` Mark Brown
2016-12-06 16:08                           ` Laurent Pinchart
2016-12-06 16:11                             ` Mark Brown
2016-11-29  6:07     ` [PATCH v3 2/2] drm/bridge: adv7511: Initialize regulators Archit Taneja
2016-11-29  6:28       ` Laurent Pinchart
2016-12-05  7:53     ` [PATCH v4 0/2] drm/bridge: adv7511: Enable regulators Archit Taneja
2016-12-05  7:53       ` [PATCH v4 1/2] dt-bindings: drm/bridge: adv7511: Add regulator bindings Archit Taneja
2016-12-09 22:11         ` Rob Herring
2016-12-18 11:17           ` Archit Taneja
2016-12-05  7:53       ` [PATCH v4 2/2] drm/bridge: adv7511: Initialize regulators Archit Taneja
2017-01-11  6:52       ` [PATCH v5 0/2] drm/bridge: adv7511: Enable regulators Archit Taneja
2017-01-11  6:52         ` Archit Taneja [this message]
2017-01-11  6:52         ` [PATCH v5 2/2] drm/bridge: adv7511: Initialize regulators Archit Taneja

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1484117547-26417-2-git-send-email-architt@codeaurora.org \
    --to=architt@codeaurora.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=laurent.pinchart@ideasonboard.com \
    --cc=linux-arm-msm@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.