All of lore.kernel.org
 help / color / mirror / Atom feed
From: jagan@openedev.com (Jagan Teki)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 1/3] ARM: dts: imx6qdl: Fix "ERROR: code indent should use tabs where possible"
Date: Fri, 20 Jan 2017 00:09:33 +0100	[thread overview]
Message-ID: <1484867375-22411-1-git-send-email-jagan@openedev.com> (raw)

From: Jagan Teki <jagan@amarulasolutions.com>

Fixed code indent tabs in respetcive imx6qdl dtsi files and
also add space on imx6qdl-icore-rqs.dtsi on usdhc bus-width nodes.

Cc: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
Changes for v2:
- none

 arch/arm/boot/dts/imx6qdl-gw52xx.dtsi    | 2 +-
 arch/arm/boot/dts/imx6qdl-gw53xx.dtsi    | 2 +-
 arch/arm/boot/dts/imx6qdl-gw552x.dtsi    | 2 +-
 arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi | 4 ++--
 4 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
index b6078b1..91991d6 100644
--- a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
@@ -235,7 +235,7 @@
 
 			/* VDD_1P8 (1+R1/R2 = 2.505): GPS/VideoIn/ENET-PHY */
 			reg_1p8v: sw2 {
-                                regulator-name = "vdd1p8";
+				regulator-name = "vdd1p8";
 				regulator-min-microvolt = <1033310>;
 				regulator-max-microvolt = <2004000>;
 				lltc,fb-voltage-divider = <301000 200000>;
diff --git a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
index 19cf036..a208e7e 100644
--- a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
@@ -227,7 +227,7 @@
 
 			/* VDD_1P8 (1+R1/R2 = 2.505): GPS/VideoIn/ENET-PHY */
 			reg_1p8v: sw2 {
-                                regulator-name = "vdd1p8";
+				regulator-name = "vdd1p8";
 				regulator-min-microvolt = <1033310>;
 				regulator-max-microvolt = <2004000>;
 				lltc,fb-voltage-divider = <301000 200000>;
diff --git a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
index 90200fa..67613dd 100644
--- a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
@@ -162,7 +162,7 @@
 
 			/* VDD_1P8 (1+R1/R2 = 2.505): ENET-PHY */
 			reg_1p8v: sw2 {
-                                regulator-name = "vdd1p8";
+				regulator-name = "vdd1p8";
 				regulator-min-microvolt = <1033310>;
 				regulator-max-microvolt = <2004000>;
 				lltc,fb-voltage-divider = <301000 200000>;
diff --git a/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi b/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi
index d5c3aa8..6e29d8b 100644
--- a/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi
@@ -223,7 +223,7 @@
 	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
 	vmcc-supply = <&reg_sd3_vmmc>;
 	cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
-	bus-witdh=<4>;
+	bus-witdh = <4>;
 	no-1-8-v;
 	status = "okay";
 };
@@ -234,7 +234,7 @@
 	pinctrl-1 = <&pinctrl_usdhc4_100mhz>;
 	pinctrl-2 = <&pinctrl_usdhc4_200mhz>;
 	vmcc-supply = <&reg_sd4_vmmc>;
-	bus-witdh=<8>;
+	bus-witdh = <8>;
 	no-1-8-v;
 	non-removable;
 	status = "okay";
-- 
1.9.1

WARNING: multiple messages have this Message-ID (diff)
From: Jagan Teki <jagan@openedev.com>
To: Shawn Guo <shawnguo@kernel.org>
Cc: devicetree@vger.kernel.org, Matteo Lisi <matteo.lisi@engicam.com>,
	linux-kernel@vger.kernel.org,
	Jagan Teki <jagan@amarulasolutions.com>,
	Michael Trimarchi <michael@amarulasolutions.com>,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 1/3] ARM: dts: imx6qdl: Fix "ERROR: code indent should use tabs where possible"
Date: Fri, 20 Jan 2017 00:09:33 +0100	[thread overview]
Message-ID: <1484867375-22411-1-git-send-email-jagan@openedev.com> (raw)

From: Jagan Teki <jagan@amarulasolutions.com>

Fixed code indent tabs in respetcive imx6qdl dtsi files and
also add space on imx6qdl-icore-rqs.dtsi on usdhc bus-width nodes.

Cc: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
Changes for v2:
- none

 arch/arm/boot/dts/imx6qdl-gw52xx.dtsi    | 2 +-
 arch/arm/boot/dts/imx6qdl-gw53xx.dtsi    | 2 +-
 arch/arm/boot/dts/imx6qdl-gw552x.dtsi    | 2 +-
 arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi | 4 ++--
 4 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
index b6078b1..91991d6 100644
--- a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
@@ -235,7 +235,7 @@
 
 			/* VDD_1P8 (1+R1/R2 = 2.505): GPS/VideoIn/ENET-PHY */
 			reg_1p8v: sw2 {
-                                regulator-name = "vdd1p8";
+				regulator-name = "vdd1p8";
 				regulator-min-microvolt = <1033310>;
 				regulator-max-microvolt = <2004000>;
 				lltc,fb-voltage-divider = <301000 200000>;
diff --git a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
index 19cf036..a208e7e 100644
--- a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
@@ -227,7 +227,7 @@
 
 			/* VDD_1P8 (1+R1/R2 = 2.505): GPS/VideoIn/ENET-PHY */
 			reg_1p8v: sw2 {
-                                regulator-name = "vdd1p8";
+				regulator-name = "vdd1p8";
 				regulator-min-microvolt = <1033310>;
 				regulator-max-microvolt = <2004000>;
 				lltc,fb-voltage-divider = <301000 200000>;
diff --git a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
index 90200fa..67613dd 100644
--- a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
@@ -162,7 +162,7 @@
 
 			/* VDD_1P8 (1+R1/R2 = 2.505): ENET-PHY */
 			reg_1p8v: sw2 {
-                                regulator-name = "vdd1p8";
+				regulator-name = "vdd1p8";
 				regulator-min-microvolt = <1033310>;
 				regulator-max-microvolt = <2004000>;
 				lltc,fb-voltage-divider = <301000 200000>;
diff --git a/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi b/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi
index d5c3aa8..6e29d8b 100644
--- a/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi
@@ -223,7 +223,7 @@
 	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
 	vmcc-supply = <&reg_sd3_vmmc>;
 	cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
-	bus-witdh=<4>;
+	bus-witdh = <4>;
 	no-1-8-v;
 	status = "okay";
 };
@@ -234,7 +234,7 @@
 	pinctrl-1 = <&pinctrl_usdhc4_100mhz>;
 	pinctrl-2 = <&pinctrl_usdhc4_200mhz>;
 	vmcc-supply = <&reg_sd4_vmmc>;
-	bus-witdh=<8>;
+	bus-witdh = <8>;
 	no-1-8-v;
 	non-removable;
 	status = "okay";
-- 
1.9.1

WARNING: multiple messages have this Message-ID (diff)
From: Jagan Teki <jagan@openedev.com>
To: Shawn Guo <shawnguo@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	Matteo Lisi <matteo.lisi@engicam.com>,
	Michael Trimarchi <michael@amarulasolutions.com>,
	Jagan Teki <jagan@amarulasolutions.com>
Subject: [PATCH v2 1/3] ARM: dts: imx6qdl: Fix "ERROR: code indent should use tabs where possible"
Date: Fri, 20 Jan 2017 00:09:33 +0100	[thread overview]
Message-ID: <1484867375-22411-1-git-send-email-jagan@openedev.com> (raw)

From: Jagan Teki <jagan@amarulasolutions.com>

Fixed code indent tabs in respetcive imx6qdl dtsi files and
also add space on imx6qdl-icore-rqs.dtsi on usdhc bus-width nodes.

Cc: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
Changes for v2:
- none

 arch/arm/boot/dts/imx6qdl-gw52xx.dtsi    | 2 +-
 arch/arm/boot/dts/imx6qdl-gw53xx.dtsi    | 2 +-
 arch/arm/boot/dts/imx6qdl-gw552x.dtsi    | 2 +-
 arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi | 4 ++--
 4 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
index b6078b1..91991d6 100644
--- a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
@@ -235,7 +235,7 @@
 
 			/* VDD_1P8 (1+R1/R2 = 2.505): GPS/VideoIn/ENET-PHY */
 			reg_1p8v: sw2 {
-                                regulator-name = "vdd1p8";
+				regulator-name = "vdd1p8";
 				regulator-min-microvolt = <1033310>;
 				regulator-max-microvolt = <2004000>;
 				lltc,fb-voltage-divider = <301000 200000>;
diff --git a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
index 19cf036..a208e7e 100644
--- a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
@@ -227,7 +227,7 @@
 
 			/* VDD_1P8 (1+R1/R2 = 2.505): GPS/VideoIn/ENET-PHY */
 			reg_1p8v: sw2 {
-                                regulator-name = "vdd1p8";
+				regulator-name = "vdd1p8";
 				regulator-min-microvolt = <1033310>;
 				regulator-max-microvolt = <2004000>;
 				lltc,fb-voltage-divider = <301000 200000>;
diff --git a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
index 90200fa..67613dd 100644
--- a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
@@ -162,7 +162,7 @@
 
 			/* VDD_1P8 (1+R1/R2 = 2.505): ENET-PHY */
 			reg_1p8v: sw2 {
-                                regulator-name = "vdd1p8";
+				regulator-name = "vdd1p8";
 				regulator-min-microvolt = <1033310>;
 				regulator-max-microvolt = <2004000>;
 				lltc,fb-voltage-divider = <301000 200000>;
diff --git a/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi b/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi
index d5c3aa8..6e29d8b 100644
--- a/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi
@@ -223,7 +223,7 @@
 	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
 	vmcc-supply = <&reg_sd3_vmmc>;
 	cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
-	bus-witdh=<4>;
+	bus-witdh = <4>;
 	no-1-8-v;
 	status = "okay";
 };
@@ -234,7 +234,7 @@
 	pinctrl-1 = <&pinctrl_usdhc4_100mhz>;
 	pinctrl-2 = <&pinctrl_usdhc4_200mhz>;
 	vmcc-supply = <&reg_sd4_vmmc>;
-	bus-witdh=<8>;
+	bus-witdh = <8>;
 	no-1-8-v;
 	non-removable;
 	status = "okay";
-- 
1.9.1

             reply	other threads:[~2017-01-19 23:09 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-01-19 23:09 Jagan Teki [this message]
2017-01-19 23:09 ` [PATCH v2 1/3] ARM: dts: imx6qdl: Fix "ERROR: code indent should use tabs where possible" Jagan Teki
2017-01-19 23:09 ` Jagan Teki
2017-01-19 23:09 ` [PATCH v2 2/3] ARM: dts: imx6ul: Add Engicam Is.IoT MX6UL eMMC initial support Jagan Teki
2017-01-19 23:09   ` Jagan Teki
2017-01-23  9:47   ` Shawn Guo
2017-01-23  9:47     ` Shawn Guo
2017-01-23  9:47     ` Shawn Guo
2017-01-23  9:49     ` Jagan Teki
2017-01-23  9:49       ` Jagan Teki
2017-01-19 23:09 ` [PATCH v2 3/3] ARM: dts: imx6ul: Add Engicam Is.IoT MX6UL NAND " Jagan Teki
2017-01-19 23:09   ` Jagan Teki
2017-01-23  9:45 ` [PATCH v2 1/3] ARM: dts: imx6qdl: Fix "ERROR: code indent should use tabs where possible" Shawn Guo
2017-01-23  9:45   ` Shawn Guo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1484867375-22411-1-git-send-email-jagan@openedev.com \
    --to=jagan@openedev.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.