All of lore.kernel.org
 help / color / mirror / Atom feed
From: Matt Flax <flatmax@flatmax.org>
To: alsa-devel@alsa-project.org, broonie@kernel.org,
	florian.meier@koalo.de, linux-rpi-kernel@lists.infradead.org,
	linux-arm-kernel@lists.infradead.org, swarren@wwwdotorg.org,
	lee@kernel.org, phil@raspberrypi.org, eric@anholt.net
Cc: Matt Flax <flatmax@flatmax.org>
Subject: [PATCH v2] ASoC: bcm2835: Add 8 channel (multitrack) capability
Date: Mon, 13 Feb 2017 10:27:15 +1100	[thread overview]
Message-ID: <1486942035-24038-1-git-send-email-flatmax@flatmax.org> (raw)
In-Reply-To: <1486422576-6958-1-git-send-email-flatmax@flatmax.org>

This patch adds multitrack capability if in DSP mode A and the
codec is master.

In bcm2835_i2s_startup, snd_pcm_hw_constraint_minmax is used to set
max channels to 8 if both SND_SOC_DAIFMT_CBM_CFM and
SND_SOC_DAIFMT_DSP_A are set. Otherwise, max channels is set to 2.
Min channels is always set to 2. These settings are accomplished
using the SNDRV_PCM_HW_PARAM_CHANNELS variable.

In bcm2835_i2s_shutdown max channels is set to 2 by default.

In bcm2835_i2s_hw_params, DSP mode A format is now an option.
Before replicating the format variable (from ch2 to ch1) for
register loading, requested channels are checked to be either 2 or 8.
This can be expaneded later to accomodate other channel counts if
supported by the sound card hardware.

Signed-off-by: Matt Flax <flatmax@flatmax.org>
---
 sound/soc/bcm/bcm2835-i2s.c | 21 ++++++++++++++++-----
 1 file changed, 16 insertions(+), 5 deletions(-)

diff --git a/sound/soc/bcm/bcm2835-i2s.c b/sound/soc/bcm/bcm2835-i2s.c
index 6ba2049..98a90b5 100644
--- a/sound/soc/bcm/bcm2835-i2s.c
+++ b/sound/soc/bcm/bcm2835-i2s.c
@@ -296,6 +296,7 @@ static int bcm2835_i2s_hw_params(struct snd_pcm_substream *substream,
 
 	switch (dev->fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
 	case SND_SOC_DAIFMT_I2S:
+	case SND_SOC_DAIFMT_DSP_A:
 		data_delay = 1;
 		break;
 	default:
@@ -312,6 +313,7 @@ static int bcm2835_i2s_hw_params(struct snd_pcm_substream *substream,
 
 	switch (params_channels(params)) {
 	case 2:
+	case 8:
 		format = BCM2835_I2S_CH1(format) | BCM2835_I2S_CH2(format);
 		format |= BCM2835_I2S_CH1(BCM2835_I2S_CHPOS(ch1pos));
 		format |= BCM2835_I2S_CH2(BCM2835_I2S_CHPOS(ch2pos));
@@ -526,7 +528,16 @@ static int bcm2835_i2s_startup(struct snd_pcm_substream *substream,
 	regmap_update_bits(dev->i2s_regmap, BCM2835_I2S_CS_A_REG,
 			BCM2835_I2S_STBY, BCM2835_I2S_STBY);
 
-	return 0;
+	/* Set the max channels to 8 if the codec is master and
+	 * we are in DSP A mode. Otherwise only allow 2 channels.
+	 */
+	if (dev->fmt &
+		(SND_SOC_DAIFMT_CBM_CFM | SND_SOC_DAIFMT_DSP_A))
+		return snd_pcm_hw_constraint_minmax(substream->runtime,
+			SNDRV_PCM_HW_PARAM_CHANNELS, 2, 8);
+	else
+		return snd_pcm_hw_constraint_minmax(substream->runtime,
+			SNDRV_PCM_HW_PARAM_CHANNELS, 2, 2);
 }
 
 static void bcm2835_i2s_shutdown(struct snd_pcm_substream *substream,
@@ -549,6 +560,10 @@ static void bcm2835_i2s_shutdown(struct snd_pcm_substream *substream,
 	 * not stop the clock when SND_SOC_DAIFMT_CONT
 	 */
 	bcm2835_i2s_stop_clock(dev);
+
+	/* Default to 2 channels */
+	snd_pcm_hw_constraint_minmax(substream->runtime,
+			SNDRV_PCM_HW_PARAM_CHANNELS, 2, 2);
 }
 
 static const struct snd_soc_dai_ops bcm2835_i2s_dai_ops = {
@@ -576,16 +591,12 @@ static struct snd_soc_dai_driver bcm2835_i2s_dai = {
 	.name	= "bcm2835-i2s",
 	.probe	= bcm2835_i2s_dai_probe,
 	.playback = {
-		.channels_min = 2,
-		.channels_max = 2,
 		.rates =	SNDRV_PCM_RATE_8000_192000,
 		.formats =	SNDRV_PCM_FMTBIT_S16_LE
 				| SNDRV_PCM_FMTBIT_S24_LE
 				| SNDRV_PCM_FMTBIT_S32_LE
 		},
 	.capture = {
-		.channels_min = 2,
-		.channels_max = 2,
 		.rates =	SNDRV_PCM_RATE_8000_192000,
 		.formats =	SNDRV_PCM_FMTBIT_S16_LE
 				| SNDRV_PCM_FMTBIT_S24_LE
-- 
2.7.4

WARNING: multiple messages have this Message-ID (diff)
From: flatmax@flatmax.org (Matt Flax)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2] ASoC: bcm2835: Add 8 channel (multitrack) capability
Date: Mon, 13 Feb 2017 10:27:15 +1100	[thread overview]
Message-ID: <1486942035-24038-1-git-send-email-flatmax@flatmax.org> (raw)
In-Reply-To: <1486422576-6958-1-git-send-email-flatmax@flatmax.org>

This patch adds multitrack capability if in DSP mode A and the
codec is master.

In bcm2835_i2s_startup, snd_pcm_hw_constraint_minmax is used to set
max channels to 8 if both SND_SOC_DAIFMT_CBM_CFM and
SND_SOC_DAIFMT_DSP_A are set. Otherwise, max channels is set to 2.
Min channels is always set to 2. These settings are accomplished
using the SNDRV_PCM_HW_PARAM_CHANNELS variable.

In bcm2835_i2s_shutdown max channels is set to 2 by default.

In bcm2835_i2s_hw_params, DSP mode A format is now an option.
Before replicating the format variable (from ch2 to ch1) for
register loading, requested channels are checked to be either 2 or 8.
This can be expaneded later to accomodate other channel counts if
supported by the sound card hardware.

Signed-off-by: Matt Flax <flatmax@flatmax.org>
---
 sound/soc/bcm/bcm2835-i2s.c | 21 ++++++++++++++++-----
 1 file changed, 16 insertions(+), 5 deletions(-)

diff --git a/sound/soc/bcm/bcm2835-i2s.c b/sound/soc/bcm/bcm2835-i2s.c
index 6ba2049..98a90b5 100644
--- a/sound/soc/bcm/bcm2835-i2s.c
+++ b/sound/soc/bcm/bcm2835-i2s.c
@@ -296,6 +296,7 @@ static int bcm2835_i2s_hw_params(struct snd_pcm_substream *substream,
 
 	switch (dev->fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
 	case SND_SOC_DAIFMT_I2S:
+	case SND_SOC_DAIFMT_DSP_A:
 		data_delay = 1;
 		break;
 	default:
@@ -312,6 +313,7 @@ static int bcm2835_i2s_hw_params(struct snd_pcm_substream *substream,
 
 	switch (params_channels(params)) {
 	case 2:
+	case 8:
 		format = BCM2835_I2S_CH1(format) | BCM2835_I2S_CH2(format);
 		format |= BCM2835_I2S_CH1(BCM2835_I2S_CHPOS(ch1pos));
 		format |= BCM2835_I2S_CH2(BCM2835_I2S_CHPOS(ch2pos));
@@ -526,7 +528,16 @@ static int bcm2835_i2s_startup(struct snd_pcm_substream *substream,
 	regmap_update_bits(dev->i2s_regmap, BCM2835_I2S_CS_A_REG,
 			BCM2835_I2S_STBY, BCM2835_I2S_STBY);
 
-	return 0;
+	/* Set the max channels to 8 if the codec is master and
+	 * we are in DSP A mode. Otherwise only allow 2 channels.
+	 */
+	if (dev->fmt &
+		(SND_SOC_DAIFMT_CBM_CFM | SND_SOC_DAIFMT_DSP_A))
+		return snd_pcm_hw_constraint_minmax(substream->runtime,
+			SNDRV_PCM_HW_PARAM_CHANNELS, 2, 8);
+	else
+		return snd_pcm_hw_constraint_minmax(substream->runtime,
+			SNDRV_PCM_HW_PARAM_CHANNELS, 2, 2);
 }
 
 static void bcm2835_i2s_shutdown(struct snd_pcm_substream *substream,
@@ -549,6 +560,10 @@ static void bcm2835_i2s_shutdown(struct snd_pcm_substream *substream,
 	 * not stop the clock when SND_SOC_DAIFMT_CONT
 	 */
 	bcm2835_i2s_stop_clock(dev);
+
+	/* Default to 2 channels */
+	snd_pcm_hw_constraint_minmax(substream->runtime,
+			SNDRV_PCM_HW_PARAM_CHANNELS, 2, 2);
 }
 
 static const struct snd_soc_dai_ops bcm2835_i2s_dai_ops = {
@@ -576,16 +591,12 @@ static struct snd_soc_dai_driver bcm2835_i2s_dai = {
 	.name	= "bcm2835-i2s",
 	.probe	= bcm2835_i2s_dai_probe,
 	.playback = {
-		.channels_min = 2,
-		.channels_max = 2,
 		.rates =	SNDRV_PCM_RATE_8000_192000,
 		.formats =	SNDRV_PCM_FMTBIT_S16_LE
 				| SNDRV_PCM_FMTBIT_S24_LE
 				| SNDRV_PCM_FMTBIT_S32_LE
 		},
 	.capture = {
-		.channels_min = 2,
-		.channels_max = 2,
 		.rates =	SNDRV_PCM_RATE_8000_192000,
 		.formats =	SNDRV_PCM_FMTBIT_S16_LE
 				| SNDRV_PCM_FMTBIT_S24_LE
-- 
2.7.4

  parent reply	other threads:[~2017-02-12 23:27 UTC|newest]

Thread overview: 72+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-02-06 23:09 [PATCH] ASoC: bcm2835: Add 8 channel (multitrack) capability Matt Flax
2017-02-06 23:09 ` Matt Flax
2017-02-08 18:28 ` Mark Brown
2017-02-08 18:28   ` Mark Brown
2017-02-08 18:54   ` Matthias Reichl
2017-02-08 18:54     ` Matthias Reichl
2017-02-08 21:13     ` Matt Flax
2017-02-08 21:13       ` [alsa-devel] " Matt Flax
2017-02-08 22:48       ` Matt Flax
2017-02-08 22:48         ` [alsa-devel] " Matt Flax
2017-02-09  9:29         ` Matthias Reichl
2017-02-09  9:29           ` [alsa-devel] " Matthias Reichl
2017-02-08 20:41   ` Matt Flax
2017-02-08 20:41     ` [alsa-devel] " Matt Flax
2017-02-08 21:14     ` Matt Flax
2017-02-08 21:14       ` [alsa-devel] " Matt Flax
2017-02-12 23:27 ` Matt Flax [this message]
2017-02-12 23:27   ` [PATCH v2] " Matt Flax
2017-02-13 20:51   ` Eric Anholt
2017-02-13 20:51     ` Eric Anholt
2017-02-14  9:32   ` Charles Keepax
2017-02-14  9:32     ` [alsa-devel] " Charles Keepax
2017-02-14 20:36     ` Matt Flax
2017-02-14 20:36       ` [alsa-devel] " Matt Flax
2017-02-14 20:52   ` [PATCH v3] " Matt Flax
2017-02-14 20:52     ` Matt Flax
2017-02-14 21:00     ` Matt Flax
2017-02-14 21:00       ` [alsa-devel] " Matt Flax
2017-02-14 21:04   ` [PATCH v4] " Matt Flax
2017-02-14 21:04     ` Matt Flax
2017-02-15  8:30     ` Arnaud Mouiche
2017-02-22  5:15       ` Matt Flax
2017-02-15  9:24     ` Charles Keepax
2017-02-15  9:24       ` Charles Keepax
2017-02-15 12:37     ` Florian Kauer
2017-02-15 12:37       ` Florian Kauer
2017-02-15 19:26     ` Eric Anholt
2017-02-15 19:26       ` Eric Anholt
2017-02-22  5:18 ` [PATCH v5] " Matt Flax
2017-02-22  5:18   ` Matt Flax
2017-02-22  5:20   ` Matt Flax
2017-02-22  5:20     ` Matt Flax
2017-02-22  5:22 ` [PATCH v6] " Matt Flax
2017-02-22  5:22   ` Matt Flax
2017-02-22  6:49   ` [alsa-devel] " kbuild test robot
2017-02-22  6:49     ` kbuild test robot
2017-02-22 18:28   ` Mark Brown
2017-02-22 18:28     ` Mark Brown
2017-02-22 22:45     ` Matt Flax
2017-02-22 22:45       ` [alsa-devel] " Matt Flax
2017-02-23 17:28       ` Mark Brown
2017-02-23 17:28         ` [alsa-devel] " Mark Brown
2017-02-22  6:56 ` [PATCH v8] " Matt Flax
2017-02-22  6:56   ` Matt Flax
2017-02-24 12:18   ` Matthias Reichl
2017-02-24 12:18     ` [alsa-devel] " Matthias Reichl
2017-02-24 13:50     ` Matt Flax
2017-02-24 13:50       ` [alsa-devel] " Matt Flax
2017-02-24 20:25       ` Matthias Reichl
2017-02-24 20:25         ` [alsa-devel] " Matthias Reichl
2017-02-24 21:30         ` Matt Flax
2017-02-24 21:30           ` [alsa-devel] " Matt Flax
2017-02-24 23:02           ` Matthias Reichl
2017-02-24 23:02             ` [alsa-devel] " Matthias Reichl
2017-02-25  0:08             ` Emmanuel Fusté
2017-02-25  0:08               ` [alsa-devel] " Emmanuel Fusté
2017-02-25  2:38               ` Matt Flax
2017-02-25  2:38                 ` [alsa-devel] " Matt Flax
2017-02-25  5:04                 ` Matt Flax
2017-02-25  5:04                   ` [alsa-devel] " Matt Flax
2017-02-26 20:28                   ` Matt Flax
2017-02-26 20:28                     ` [alsa-devel] " Matt Flax

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1486942035-24038-1-git-send-email-flatmax@flatmax.org \
    --to=flatmax@flatmax.org \
    --cc=alsa-devel@alsa-project.org \
    --cc=broonie@kernel.org \
    --cc=eric@anholt.net \
    --cc=florian.meier@koalo.de \
    --cc=lee@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-rpi-kernel@lists.infradead.org \
    --cc=phil@raspberrypi.org \
    --cc=swarren@wwwdotorg.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.