From: Dalon Westergreen <dwesterg@gmail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v3 1/2] common: image: update boot_get_fpga to support arbitrary fpga image
Date: Mon, 20 Feb 2017 06:56:04 -0800 [thread overview]
Message-ID: <1487602565-6349-2-git-send-email-dwesterg@gmail.com> (raw)
In-Reply-To: <1487602565-6349-1-git-send-email-dwesterg@gmail.com>
The implementation of boot_get_fpga only supported one fpga family.
This modification allows for any of the fpga devices supported by
fpga_load to be used.
Signed-off-by: Dalon Westergreen <dwesterg@gmail.com>
--
Changes in v3:
- Fix typos/caps in comments
Changes in v2:
- Add fitimage support for fpga-devnum and fpga-partial-image
- Use above in boot_get_fpga
- for xilinx fpgas double check using image size to determine
if image is a partial image
---
common/image-fit.c | 51 +++++++++++++++++++++++++++++++++++++++++++++++++++
common/image.c | 51 ++++++++++++++++++++++++++++++++-------------------
include/image.h | 5 +++++
3 files changed, 88 insertions(+), 19 deletions(-)
diff --git a/common/image-fit.c b/common/image-fit.c
index 109ecfa..eb0c633 100644
--- a/common/image-fit.c
+++ b/common/image-fit.c
@@ -916,6 +916,57 @@ ulong fit_get_end(const void *fit)
}
/**
+ * fit_image_fpga_get_devnum - get fpga devnum
+ * @fit: pointer to the FIT format image header
+ * @noffset: fpga node offset
+ * @devnum: pointer to an int, will hold fpga devnum
+ *
+ * fit_image_fpga_get_devnum() finds the fpga devnum for which the fpga data is
+ * intended. If the property is not found, we default to 0.
+ *
+ * returns:
+ * 0, on devnum not found
+ * value, on devnum found
+ */
+int fit_image_fpga_get_devnum(const void *fit, int noffset, int *devnum)
+{
+ int len;
+ int *value;
+
+ value = (int *)fdt_getprop(fit, noffset, FIT_FPGA_DEVNUM_PROP, &len);
+ if (value == NULL || len != sizeof(int))
+ *devnum = 0;
+ else
+ *devnum = *value;
+
+ return 0;
+}
+
+/**
+ * fit_image_fpga_is_partial - is partial fpga
+ * @fit: pointer to the FIT format image header
+ * @noffset: fpga node offset
+ *
+ * fit_image_fpga_is_partial() checks if the fpga node sets the property
+ * indicating the data represents a partial fpga image.
+ *
+ * returns:
+ * 0, on devnum not found
+ * value, on devnum found
+ */
+int fit_image_fpga_is_partial(const void *fit, int noffset)
+{
+ int len;
+ int *value;
+
+ value = (int *)fdt_getprop(fit, noffset, FIT_FPGA_PARTIAL_PROP, &len);
+ if ((value == NULL || len != sizeof(int)) || (value == 0))
+ return 0;
+ else
+ return 1;
+}
+
+/**
* fit_set_timestamp - set node timestamp property
* @fit: pointer to the FIT format image header
* @noffset: node offset
diff --git a/common/image.c b/common/image.c
index 0f88984..6480b0a 100644
--- a/common/image.c
+++ b/common/image.c
@@ -1306,7 +1306,7 @@ int boot_get_setup(bootm_headers_t *images, uint8_t arch,
}
#if IMAGE_ENABLE_FIT
-#if defined(CONFIG_FPGA) && defined(CONFIG_FPGA_XILINX)
+#if defined(CONFIG_FPGA)
int boot_get_fpga(int argc, char * const argv[], bootm_headers_t *images,
uint8_t arch, const ulong *ld_start, ulong * const ld_len)
{
@@ -1316,9 +1316,10 @@ int boot_get_fpga(int argc, char * const argv[], bootm_headers_t *images,
int fit_img_result;
const char *uname, *name;
int err;
- int devnum = 0; /* TODO support multi fpga platforms */
- const fpga_desc * const desc = fpga_get_desc(devnum);
- xilinx_desc *desc_xilinx = desc->devdesc;
+ int devnum;
+ const fpga_desc *desc;
+ xilinx_desc *desc_xilinx;
+ bitstream_type bstype = BIT_FULL;
/* Check to see if the images struct has a FIT configuration */
if (!genimg_has_config(images)) {
@@ -1365,26 +1366,38 @@ int boot_get_fpga(int argc, char * const argv[], bootm_headers_t *images,
return fit_img_result;
}
- if (img_len >= desc_xilinx->size) {
- name = "full";
- err = fpga_loadbitstream(devnum, (char *)img_data,
- img_len, BIT_FULL);
- if (err)
- err = fpga_load(devnum, (const void *)img_data,
- img_len, BIT_FULL);
- } else {
- name = "partial";
- err = fpga_loadbitstream(devnum, (char *)img_data,
- img_len, BIT_PARTIAL);
- if (err)
- err = fpga_load(devnum, (const void *)img_data,
- img_len, BIT_PARTIAL);
+ /* Get FPGA device number, defaults to 0 */
+ fit_image_fpga_get_devnum(buf, conf_noffset, &devnum);
+
+ /* Check bitstream type */
+ if (fit_image_fpga_is_partial(buf, conf_noffset))
+ bstype = BIT_PARTIAL;
+
+ /* Legacy support detecting partial config files for Xilinx */
+ desc = fpga_get_desc(devnum);
+ if (desc->devtype == fpga_xilinx) {
+ desc_xilinx = desc->devdesc;
+ if (img_len < desc_xilinx->size)
+ bstype = BIT_PARTIAL;
}
+ /* Try bitstream format first */
+ err = fpga_loadbitstream(devnum, (char *)img_data,
+ img_len, bstype);
+ if (err)
+ err = fpga_load(devnum, (const void *)img_data,
+ img_len, bstype);
+
if (err)
return err;
- printf(" Programming %s bitstream... OK\n", name);
+ if (bstype == BIT_PARTIAL)
+ name = "partial";
+ else
+ name = "full";
+
+ printf(" Programming %s bitstream into fpga %d... OK\n",
+ name, devnum);
break;
default:
printf("The given image format is not supported (corrupt?)\n");
diff --git a/include/image.h b/include/image.h
index 1e686b7..75d2afc 100644
--- a/include/image.h
+++ b/include/image.h
@@ -876,6 +876,8 @@ int bootz_setup(ulong image, ulong *start, ulong *end);
#define FIT_COMP_PROP "compression"
#define FIT_ENTRY_PROP "entry"
#define FIT_LOAD_PROP "load"
+#define FIT_FPGA_DEVNUM_PROP "fpga-devnum"
+#define FIT_FPGA_PARTIAL_PROP "fpga-partial-image"
/* configuration node */
#define FIT_KERNEL_PROP "kernel"
@@ -955,6 +957,9 @@ int fit_image_hash_get_value(const void *fit, int noffset, uint8_t **value,
int fit_set_timestamp(void *fit, int noffset, time_t timestamp);
+int fit_image_fpga_get_devnum(const void *fit, int noffset, int *devnum);
+int fit_image_fpga_is_partial(const void *fit, int noffset);
+
/**
* fit_add_verification_data() - add verification data to FIT image nodes
*
--
2.7.4
next prev parent reply other threads:[~2017-02-20 14:56 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-02-20 14:56 [U-Boot] [PATCH v3 0/2] common: fitimage support for arbitrary fpga type Dalon Westergreen
2017-02-20 14:56 ` Dalon Westergreen [this message]
2017-02-20 15:16 ` [U-Boot] [PATCH v3 1/2] common: image: update boot_get_fpga to support arbitrary fpga image Michal Simek
2017-02-20 15:46 ` Dalon Westergreen
2017-02-21 12:21 ` Michal Simek
2017-02-22 4:00 ` Simon Glass
2017-02-22 12:08 ` Tomas Melin
2017-02-22 14:26 ` Dalon Westergreen
2017-02-22 14:22 ` Dalon Westergreen
2017-02-24 16:48 ` Dalon Westergreen
2017-02-20 14:56 ` [U-Boot] [PATCH v3 2/2] common: bootm: add support for arbitrary fgpa configuration Dalon Westergreen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1487602565-6349-2-git-send-email-dwesterg@gmail.com \
--to=dwesterg@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.