All of lore.kernel.org
 help / color / mirror / Atom feed
From: jagan@openedev.com (Jagan Teki)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 3/4] arm: dts: imx6q: Add Engicam i.CoreM6 Quad/Dual OpenFrame Cap 12.3 initial support
Date: Tue, 21 Feb 2017 01:35:20 +0530	[thread overview]
Message-ID: <1487621121-6051-3-git-send-email-jagan@openedev.com> (raw)
In-Reply-To: <1487621121-6051-1-git-send-email-jagan@openedev.com>

i.CoreM6 Quad/Dual OpenFrame modules are "system on modules plus
openframe display carriers" which are good solution for develop
user friendly graphic user interface.

General features:
CPU           NXP i.MX6Q rev1.2 at 792 MHz
RAM           1GB, 32, 64 bit, DDR3-800/1066
NAND          SLC,512MB
LVDS Display  TFT 12.3" industrial, 1280x480 resolution
Backlight     LED backlight, brightness 350 Cd/m2
Power supply  15 to 30 Vdc

Cc: Domenico Acri <domenico.acri@engicam.com>
Cc: Matteo Lisi <matteo.lisi@engicam.com>
Cc: Michael Trimarchi <michael@amarulasolutions.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Jagan Teki <jagan@openedev.com>
---
Changes for v2:
- newly added patch

 arch/arm/boot/dts/Makefile                |  1 +
 arch/arm/boot/dts/imx6q-icore-ofcap12.dts | 76 +++++++++++++++++++++++++++++++
 2 files changed, 77 insertions(+)
 create mode 100644 arch/arm/boot/dts/imx6q-icore-ofcap12.dts

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 458ec09..adfdaee 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -399,6 +399,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
 	imx6q-hummingboard.dtb \
 	imx6q-icore.dtb \
 	imx6q-icore-ofcap10.dtb \
+	imx6q-icore-ofcap12.dtb \
 	imx6q-icore-rqs.dtb \
 	imx6q-marsboard.dtb \
 	imx6q-mccmon6.dtb \
diff --git a/arch/arm/boot/dts/imx6q-icore-ofcap12.dts b/arch/arm/boot/dts/imx6q-icore-ofcap12.dts
new file mode 100644
index 0000000..d0995b2
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-icore-ofcap12.dts
@@ -0,0 +1,76 @@
+/*
+ * Copyright (C) 2016 Amarula Solutions B.V.
+ * Copyright (C) 2016 Engicam S.r.l.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-icore.dtsi"
+
+/ {
+	model = "Engicam i.CoreM6 Quad/Dual OpenFrame Capacitive touch 12 Kit";
+	compatible = "engicam,imx6-icore", "fsl,imx6q";
+};
+
+&ldb {
+	status = "okay";
+
+	lvds-channel at 0 {
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <18>;
+		status = "okay";
+
+		display-timings {
+                        native-mode = <&timing1>;
+                        timing1: hsd100pxn1 {
+                                clock-frequency = <46800000>;
+                                hactive = <1280>;
+                                vactive = <480>;
+                                hback-porch = <353>;
+                                hfront-porch = <47>;
+                                vback-porch = <39>;
+                                vfront-porch = <4>;
+                                hsync-len = <8>;
+                                vsync-len = <2>;
+                        };
+                };
+	};
+};
-- 
1.9.1

WARNING: multiple messages have this Message-ID (diff)
From: Jagan Teki <jagan@openedev.com>
To: Shawn Guo <shawnguo@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	Matteo Lisi <matteo.lisi@engicam.com>,
	Michael Trimarchi <michael@amarulasolutions.com>,
	Jagan Teki <jagan@openedev.com>,
	Domenico Acri <domenico.acri@engicam.com>
Subject: [PATCH v2 3/4] arm: dts: imx6q: Add Engicam i.CoreM6 Quad/Dual OpenFrame Cap 12.3 initial support
Date: Tue, 21 Feb 2017 01:35:20 +0530	[thread overview]
Message-ID: <1487621121-6051-3-git-send-email-jagan@openedev.com> (raw)
In-Reply-To: <1487621121-6051-1-git-send-email-jagan@openedev.com>

i.CoreM6 Quad/Dual OpenFrame modules are "system on modules plus
openframe display carriers" which are good solution for develop
user friendly graphic user interface.

General features:
CPU           NXP i.MX6Q rev1.2 at 792 MHz
RAM           1GB, 32, 64 bit, DDR3-800/1066
NAND          SLC,512MB
LVDS Display  TFT 12.3" industrial, 1280x480 resolution
Backlight     LED backlight, brightness 350 Cd/m2
Power supply  15 to 30 Vdc

Cc: Domenico Acri <domenico.acri@engicam.com>
Cc: Matteo Lisi <matteo.lisi@engicam.com>
Cc: Michael Trimarchi <michael@amarulasolutions.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Jagan Teki <jagan@openedev.com>
---
Changes for v2:
- newly added patch

 arch/arm/boot/dts/Makefile                |  1 +
 arch/arm/boot/dts/imx6q-icore-ofcap12.dts | 76 +++++++++++++++++++++++++++++++
 2 files changed, 77 insertions(+)
 create mode 100644 arch/arm/boot/dts/imx6q-icore-ofcap12.dts

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 458ec09..adfdaee 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -399,6 +399,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
 	imx6q-hummingboard.dtb \
 	imx6q-icore.dtb \
 	imx6q-icore-ofcap10.dtb \
+	imx6q-icore-ofcap12.dtb \
 	imx6q-icore-rqs.dtb \
 	imx6q-marsboard.dtb \
 	imx6q-mccmon6.dtb \
diff --git a/arch/arm/boot/dts/imx6q-icore-ofcap12.dts b/arch/arm/boot/dts/imx6q-icore-ofcap12.dts
new file mode 100644
index 0000000..d0995b2
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-icore-ofcap12.dts
@@ -0,0 +1,76 @@
+/*
+ * Copyright (C) 2016 Amarula Solutions B.V.
+ * Copyright (C) 2016 Engicam S.r.l.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-icore.dtsi"
+
+/ {
+	model = "Engicam i.CoreM6 Quad/Dual OpenFrame Capacitive touch 12 Kit";
+	compatible = "engicam,imx6-icore", "fsl,imx6q";
+};
+
+&ldb {
+	status = "okay";
+
+	lvds-channel@0 {
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <18>;
+		status = "okay";
+
+		display-timings {
+                        native-mode = <&timing1>;
+                        timing1: hsd100pxn1 {
+                                clock-frequency = <46800000>;
+                                hactive = <1280>;
+                                vactive = <480>;
+                                hback-porch = <353>;
+                                hfront-porch = <47>;
+                                vback-porch = <39>;
+                                vfront-porch = <4>;
+                                hsync-len = <8>;
+                                vsync-len = <2>;
+                        };
+                };
+	};
+};
-- 
1.9.1

  parent reply	other threads:[~2017-02-20 20:05 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-02-20 20:05 [PATCH v2 1/4] arm: dts: imx6qdl-icore: Add backlight support for lvds Jagan Teki
2017-02-20 20:05 ` Jagan Teki
2017-02-20 20:05 ` Jagan Teki
2017-02-20 20:05 ` [PATCH v2 2/4] arm: dts: imx6q: Add Engicam i.CoreM6 Quad/Dual OpenFrame Cap 10.1 initial support Jagan Teki
2017-02-20 20:05   ` Jagan Teki
2017-02-20 20:11   ` Fabio Estevam
2017-02-20 20:11     ` Fabio Estevam
2017-02-20 20:11     ` Fabio Estevam
2017-02-20 20:18     ` Fabio Estevam
2017-02-20 20:18       ` Fabio Estevam
2017-02-20 20:18       ` Fabio Estevam
2017-02-20 20:05 ` Jagan Teki [this message]
2017-02-20 20:05   ` [PATCH v2 3/4] arm: dts: imx6q: Add Engicam i.CoreM6 Quad/Dual OpenFrame Cap 12.3 " Jagan Teki
2017-02-20 20:05 ` [PATCH v2 4/4] arm: dts: imx6q-icore: Add LVDS support Jagan Teki
2017-02-20 20:05   ` Jagan Teki

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1487621121-6051-3-git-send-email-jagan@openedev.com \
    --to=jagan@openedev.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.