cpufreq: get cpufreq_frequency_table from clk driver

cpufreq: get cpufreq_frequency_table from clk driver

[Vlad Zakharov]
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cpufreq: get cpufreq_frequency_table from clk driver

[Vlad Zakharov]

Hello,

I am trying to implement a cpufreq driver for ARCHS cpu.

And I faced with one question I am not able to answer myself. cpufreq framework allows us using cpufreq frequency tables
that store available for current policy range of frequencies with any additional data. As I understand for example it
can be clock configurations for this particular frequency.

Also I have a clk driver that manages actual cpu frequency. In fact it uses very similar tables that contain frequencies
and corresponding values of clock configurations registers that are to be set up with current frequency.

So the question is can I get such tables from clk driver somehow? I would be very convenient: this tables differs for
ARCHS CPU. E.g. on different boards it is clocked by different PLLs and oscillators.

Do you know any way to get the tables from clk driver? Any suggestions or comments might be very helpful.

Thanks!

-- 
Best regards,
Vlad Zakharov <vzakhar at synopsys.com>

cpufreq: get cpufreq_frequency_table from clk driver

[Vlad Zakharov]

Hello,

I am trying to implement a cpufreq driver for ARCHS cpu.

And I faced with one question I am not able to answer myself. cpufreq framework allows us using cpufreq frequency tables
that store available for current policy range of frequencies with any additional data. As I understand for example it
can be clock configurations for this particular frequency.

Also I have a clk driver that manages actual cpu frequency. In fact it uses very similar tables that contain frequencies
and corresponding values of clock configurations registers that are to be set up with current frequency.

So the question is can I get such tables from clk driver somehow? I would be very convenient: this tables differs for
ARCHS CPU. E.g. on different boards it is clocked by different PLLs and oscillators.

Do you know any way to get the tables from clk driver? Any suggestions or comments might be very helpful.

Thanks!

-- 
Best regards,
Vlad Zakharov <vzakhar@synopsys.com>

Re: cpufreq: get cpufreq_frequency_table from clk driver

[Viresh Kumar]

On 21-02-17, 11:13, Vlad Zakharov wrote:
> Hello,
> 
> I am trying to implement a cpufreq driver for ARCHS cpu.

You mean ARC architecture here ?

> And I faced with one question I am not able to answer myself. cpufreq framework allows us using cpufreq frequency tables
> that store available for current policy range of frequencies with any additional data. As I understand for example it
> can be clock configurations for this particular frequency.

Yes, it can be any platform specific data. Yes, but it is better
handled by the clk driver in your case and cpufreq driver just needs
to call clk_set_rate().

> Also I have a clk driver that manages actual cpu frequency. In fact it uses very similar tables that contain frequencies
> and corresponding values of clock configurations registers that are to be set up with current frequency.

Good.

> So the question is can I get such tables from clk driver somehow? I would be very convenient: this tables differs for
> ARCHS CPU. E.g. on different boards it is clocked by different PLLs and oscillators.

Not that I am aware of. Just make copies for every board or if you can
use device tree, get it using OPP tables.

-- 
viresh

cpufreq: get cpufreq_frequency_table from clk driver

[Viresh Kumar]

On 21-02-17, 11:13, Vlad Zakharov wrote:
> Hello,
> 
> I am trying to implement a cpufreq driver for ARCHS cpu.

You mean ARC architecture here ?

> And I faced with one question I am not able to answer myself. cpufreq framework allows us using cpufreq frequency tables
> that store available for current policy range of frequencies with any additional data. As I understand for example it
> can be clock configurations for this particular frequency.

Yes, it can be any platform specific data. Yes, but it is better
handled by the clk driver in your case and cpufreq driver just needs
to call clk_set_rate().

> Also I have a clk driver that manages actual cpu frequency. In fact it uses very similar tables that contain frequencies
> and corresponding values of clock configurations registers that are to be set up with current frequency.

Good.

> So the question is can I get such tables from clk driver somehow? I would be very convenient: this tables differs for
> ARCHS CPU. E.g. on different boards it is clocked by different PLLs and oscillators.

Not that I am aware of. Just make copies for every board or if you can
use device tree, get it using OPP tables.

-- 
viresh