Re: [PATCH 05/12] drm/ast: Fix calculation of MCLK

[Benjamin Herrenschmidt <benh@kernel.crashing.org>]

On Fri, 2017-02-24 at 12:54 +1030, Joel Stanley wrote:
> On Fri, Feb 24, 2017 at 9:23 AM, Benjamin Herrenschmidt
> <benh@kernel.crashing.org> wrote:
> > Some braces were missing causing an incorrect calculation.
> > 
> > Y.C. Chen from Aspeed provided me with the right formula
> > which I tested on AST2400 and 2500.
> 
> Y. C. Chen, can you point out this calculation in the programming
> guide?
> 
> All of the PLL calculations I can find in the ast2400 documentation
> are different to this one.

Different PLL register, see my other email. I've checked the result
of the calculation on our AST2500 and AST2400 machines.

Cheers,
Ben.

> Cheers,
> 
> Joel
> 
> > 
> > The MCLK isn't currently used by the driver (it will eventually
> > to filter modes) so the issue isn't catastrophic.
> > 
> > Also make the printed value a bit more meaningful
> > 
> > Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
> > ---
> >  drivers/gpu/drm/ast/ast_main.c | 6 ++++--
> >  1 file changed, 4 insertions(+), 2 deletions(-)
> > 
> > diff --git a/drivers/gpu/drm/ast/ast_main.c
> > b/drivers/gpu/drm/ast/ast_main.c
> > index 718c15b..d194af3 100644
> > --- a/drivers/gpu/drm/ast/ast_main.c
> > +++ b/drivers/gpu/drm/ast/ast_main.c
> > @@ -352,7 +352,7 @@ static int ast_get_dram_info(struct drm_device
> > *dev)
> >                 div = 0x1;
> >                 break;
> >         }
> > -       ast->mclk = ref_pll * (num + 2) / (denum + 2) * (div *
> > 1000);
> > +       ast->mclk = ref_pll * (num + 2) / ((denum + 2) * (div *
> > 1000));
> >         return 0;
> >  }
> > 
> > @@ -496,7 +496,9 @@ int ast_driver_load(struct drm_device *dev,
> > unsigned long flags)
> >                 if (ret)
> >                         goto out_free;
> >                 ast->vram_size = ast_get_vram_info(dev);
> > -               DRM_INFO("dram %d %d %d %08x\n", ast->mclk, ast-
> > >dram_type, ast->dram_bus_width, ast->vram_size);
> > +               DRM_INFO("dram MCLK=%u Mhz type=%d bus_width=%d
> > size=%08x\n",
> > +                        ast->mclk, ast->dram_type,
> > +                        ast->dram_bus_width, ast->vram_size);
> >         }
> > 
> >         if (need_post)
> > --
> > 2.9.3
> >