Patch "scsi: storvsc: properly set residual data length on errors" has been added to the 4.10-stable tree

Patch "scsi: storvsc: properly set residual data length on errors" has been added to the 4.10-stable tree

[gregkh]

This is a note to let you know that I've just added the patch titled

    scsi: storvsc: properly set residual data length on errors

to the 4.10-stable tree which can be found at:
    http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
     scsi-storvsc-properly-set-residual-data-length-on-errors.patch
and it can be found in the queue-4.10 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@vger.kernel.org> know about it.


>From 40630f462824ee24bc00d692865c86c3828094e0 Mon Sep 17 00:00:00 2001
From: Long Li <longli@microsoft.com>
Date: Wed, 14 Dec 2016 18:46:03 -0800
Subject: scsi: storvsc: properly set residual data length on errors

From: Long Li <longli@microsoft.com>

commit 40630f462824ee24bc00d692865c86c3828094e0 upstream.

On I/O errors, the Windows driver doesn't set data_transfer_length
on error conditions other than SRB_STATUS_DATA_OVERRUN.
In these cases we need to set data_transfer_length to 0,
indicating there is no data transferred. On SRB_STATUS_DATA_OVERRUN,
data_transfer_length is set by the Windows driver to the actual data transferred.

Reported-by: Shiva Krishna <Shiva.Krishna@nimblestorage.com>
Signed-off-by: Long Li <longli@microsoft.com>
Reviewed-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/scsi/storvsc_drv.c |   16 +++++++++++++---
 1 file changed, 13 insertions(+), 3 deletions(-)

--- a/drivers/scsi/storvsc_drv.c
+++ b/drivers/scsi/storvsc_drv.c
@@ -377,6 +377,7 @@ enum storvsc_request_type {
 #define SRB_STATUS_SUCCESS	0x01
 #define SRB_STATUS_ABORTED	0x02
 #define SRB_STATUS_ERROR	0x04
+#define SRB_STATUS_DATA_OVERRUN	0x12
 
 #define SRB_STATUS(status) \
 	(status & ~(SRB_STATUS_AUTOSENSE_VALID | SRB_STATUS_QUEUE_FROZEN))
@@ -962,6 +963,7 @@ static void storvsc_command_completion(s
 	struct scsi_cmnd *scmnd = cmd_request->cmd;
 	struct scsi_sense_hdr sense_hdr;
 	struct vmscsi_request *vm_srb;
+	u32 data_transfer_length;
 	struct Scsi_Host *host;
 	u32 payload_sz = cmd_request->payload_sz;
 	void *payload = cmd_request->payload;
@@ -969,6 +971,7 @@ static void storvsc_command_completion(s
 	host = stor_dev->host;
 
 	vm_srb = &cmd_request->vstor_packet.vm_srb;
+	data_transfer_length = vm_srb->data_transfer_length;
 
 	scmnd->result = vm_srb->scsi_status;
 
@@ -982,13 +985,20 @@ static void storvsc_command_completion(s
 					     &sense_hdr);
 	}
 
-	if (vm_srb->srb_status != SRB_STATUS_SUCCESS)
+	if (vm_srb->srb_status != SRB_STATUS_SUCCESS) {
 		storvsc_handle_error(vm_srb, scmnd, host, sense_hdr.asc,
 					 sense_hdr.ascq);
+		/*
+		 * The Windows driver set data_transfer_length on
+		 * SRB_STATUS_DATA_OVERRUN. On other errors, this value
+		 * is untouched.  In these cases we set it to 0.
+		 */
+		if (vm_srb->srb_status != SRB_STATUS_DATA_OVERRUN)
+			data_transfer_length = 0;
+	}
 
 	scsi_set_resid(scmnd,
-		cmd_request->payload->range.len -
-		vm_srb->data_transfer_length);
+		cmd_request->payload->range.len - data_transfer_length);
 
 	scmnd->scsi_done(scmnd);
 


Patches currently in stable-queue which might be from longli@microsoft.com are

queue-4.10/scsi-storvsc-use-tagged-srb-requests-if-supported-by-the-device.patch
queue-4.10/scsi-storvsc-properly-set-residual-data-length-on-errors.patch
queue-4.10/scsi-storvsc-properly-handle-srb_error-when-sense-message-is-present.patch