All of lore.kernel.org
 help / color / mirror / Atom feed
From: Tim Chen <tim.c.chen@linux.intel.com>
To: "Huang, Ying" <ying.huang@intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>,
	Andi Kleen <ak@linux.intel.com>,
	Dave Hansen <dave.hansen@linux.intel.com>,
	Shaohua Li <shli@kernel.org>, Rik van Riel <riel@redhat.com>,
	Ingo Molnar <mingo@kernel.org>, Michal Hocko <mhocko@suse.com>,
	Vladimir Davydov <vdavydov.dev@gmail.com>,
	Minchan Kim <minchan@kernel.org>,
	Dmitry Safonov <dsafonov@virtuozzo.com>,
	Mark Rutland <mark.rutland@arm.com>,
	Vegard Nossum <vegard.nossum@oracle.com>,
	Joonsoo Kim <iamjoonsoo.kim@lge.com>,
	Johannes Weiner <hannes@cmpxchg.org>,
	Mel Gorman <mgorman@techsingularity.net>,
	"Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>,
	Ross Zwisler <ross.zwisler@linux.intel.com>,
	Jan Kara <jack@suse.cz>,
	"Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>,
	Lorenzo Stoakes <lstoakes@gmail.com>,
	Dave Jiang <dave.jiang@intel.com>,
	Hugh Dickins <hughd@google.com>,
	Gerald Schaefer <gerald.schaefer@de.ibm.com>,
	Aaron Lu <aaron.lu@intel.com>,
	linux-kernel@vger.kernel.org, linux-mm@kvack.org
Subject: Re: [PATCH] mm, swap: VMA based swap readahead
Date: Tue, 21 Mar 2017 09:59:05 -0400	[thread overview]
Message-ID: <1490104745.17719.6.camel@linux.intel.com> (raw)
In-Reply-To: <871stsbr4y.fsf@yhuang-dev.intel.com>

On Mon, 2017-03-20 at 10:47 +0800, Huang, Ying wrote:
> Hi, Tim,
> 
> Tim Chen <tim.c.chen@linux.intel.com> writes:
> 
> > 
> > On Tue, Mar 14, 2017 at 05:25:29PM +0800, Huang, Ying wrote:
> > > 
> > > +struct page *do_swap_page_readahead(struct vm_fault *vmf,
> > > +				A A A A struct vma_swap_readahead *swap_ra,
> > > +				A A A A swp_entry_t fentry,
> > > +				A A A A struct page *fpage)
> > > +{
> > > +	struct blk_plug plug;
> > > +	struct vm_area_struct *vma = vmf->vma;
> > > +	struct page *page;
> > > +	unsigned long addr;
> > > +	pte_t *pte, pentry;
> > > +	gfp_t gfp_mask;
> > > +	swp_entry_t entry;
> > > +	int i, alloc = 0, count;
> > > +	bool page_allocated;
> > > +
> > > +	addr = vmf->address & PAGE_MASK;
> > > +	blk_start_plug(&plug);
> > > +	if (!fpage) {
> > > +		fpage = __read_swap_cache_async(fentry, GFP_HIGHUSER_MOVABLE,
> > > +						vma, addr, &page_allocated);
> > > +		if (!fpage) {
> > > +			blk_finish_plug(&plug);
> > > +			return NULL;
> > > +		}
> > > +		if (page_allocated) {
> > > +			alloc++;
> > > +			swap_readpage(fpage);
> > > +		}
> > Do you need to add here a put_page as there's a get_page
> > in __read-swap_cache_async?
> I don't call put_page() here because the page will be mapped to process
> page table.
> 
> > 
> > 		put_page(fpage);
> > 
> > I think there is no put_page on the returned page when you return from
> > do_swap_page_readahead.
> In the original swapin_readahead(), the read_swap_cache_async() will be
> called for the fault swap entry again in the end of the function, and
> pug_page() is not called there.
> 

I missed the second call to read_swap_cache_async in swapin_readahead.
You're right that we should keep the reference on the faulted page and not call
put_page on fpage here.

Thanks.

Tim

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>

WARNING: multiple messages have this Message-ID (diff)
From: Tim Chen <tim.c.chen@linux.intel.com>
To: "Huang, Ying" <ying.huang@intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>,
	Andi Kleen <ak@linux.intel.com>,
	Dave Hansen <dave.hansen@linux.intel.com>,
	Shaohua Li <shli@kernel.org>, Rik van Riel <riel@redhat.com>,
	Ingo Molnar <mingo@kernel.org>, Michal Hocko <mhocko@suse.com>,
	Vladimir Davydov <vdavydov.dev@gmail.com>,
	Minchan Kim <minchan@kernel.org>,
	Dmitry Safonov <dsafonov@virtuozzo.com>,
	Mark Rutland <mark.rutland@arm.com>,
	Vegard Nossum <vegard.nossum@oracle.com>,
	Joonsoo Kim <iamjoonsoo.kim@lge.com>,
	Johannes Weiner <hannes@cmpxchg.org>,
	Mel Gorman <mgorman@techsingularity.net>,
	"Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>,
	Ross Zwisler <ross.zwisler@linux.intel.com>,
	Jan Kara <jack@suse.cz>,
	"Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>,
	Lorenzo Stoakes <lstoakes@gmail.com>,
	Dave Jiang <dave.jiang@intel.com>,
	Hugh Dickins <hughd@google.com>,
	Gerald Schaefer <gerald.schaefer@de.ibm.com>,
	Aaron Lu <aaron.lu@intel.com>,
	linux-kernel@vger.kernel.org, linux-mm@kvack.org
Subject: Re: [PATCH] mm, swap: VMA based swap readahead
Date: Tue, 21 Mar 2017 09:59:05 -0400	[thread overview]
Message-ID: <1490104745.17719.6.camel@linux.intel.com> (raw)
In-Reply-To: <871stsbr4y.fsf@yhuang-dev.intel.com>

On Mon, 2017-03-20 at 10:47 +0800, Huang, Ying wrote:
> Hi, Tim,
> 
> Tim Chen <tim.c.chen@linux.intel.com> writes:
> 
> > 
> > On Tue, Mar 14, 2017 at 05:25:29PM +0800, Huang, Ying wrote:
> > > 
> > > +struct page *do_swap_page_readahead(struct vm_fault *vmf,
> > > +				    struct vma_swap_readahead *swap_ra,
> > > +				    swp_entry_t fentry,
> > > +				    struct page *fpage)
> > > +{
> > > +	struct blk_plug plug;
> > > +	struct vm_area_struct *vma = vmf->vma;
> > > +	struct page *page;
> > > +	unsigned long addr;
> > > +	pte_t *pte, pentry;
> > > +	gfp_t gfp_mask;
> > > +	swp_entry_t entry;
> > > +	int i, alloc = 0, count;
> > > +	bool page_allocated;
> > > +
> > > +	addr = vmf->address & PAGE_MASK;
> > > +	blk_start_plug(&plug);
> > > +	if (!fpage) {
> > > +		fpage = __read_swap_cache_async(fentry, GFP_HIGHUSER_MOVABLE,
> > > +						vma, addr, &page_allocated);
> > > +		if (!fpage) {
> > > +			blk_finish_plug(&plug);
> > > +			return NULL;
> > > +		}
> > > +		if (page_allocated) {
> > > +			alloc++;
> > > +			swap_readpage(fpage);
> > > +		}
> > Do you need to add here a put_page as there's a get_page
> > in __read-swap_cache_async?
> I don't call put_page() here because the page will be mapped to process
> page table.
> 
> > 
> > 		put_page(fpage);
> > 
> > I think there is no put_page on the returned page when you return from
> > do_swap_page_readahead.
> In the original swapin_readahead(), the read_swap_cache_async() will be
> called for the fault swap entry again in the end of the function, and
> pug_page() is not called there.
> 

I missed the second call to read_swap_cache_async in swapin_readahead.
You're right that we should keep the reference on the faulted page and not call
put_page on fpage here.

Thanks.

Tim

  reply	other threads:[~2017-03-21 13:59 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-03-14  9:25 [PATCH] mm, swap: VMA based swap readahead Huang, Ying
2017-03-14  9:25 ` Huang, Ying
2017-03-20  1:01 ` Tim Chen
2017-03-20  1:01   ` Tim Chen
2017-03-20  2:47   ` Huang, Ying
2017-03-21 13:59     ` Tim Chen [this message]
2017-03-21 13:59       ` Tim Chen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1490104745.17719.6.camel@linux.intel.com \
    --to=tim.c.chen@linux.intel.com \
    --cc=aaron.lu@intel.com \
    --cc=ak@linux.intel.com \
    --cc=akpm@linux-foundation.org \
    --cc=aneesh.kumar@linux.vnet.ibm.com \
    --cc=dave.hansen@linux.intel.com \
    --cc=dave.jiang@intel.com \
    --cc=dsafonov@virtuozzo.com \
    --cc=gerald.schaefer@de.ibm.com \
    --cc=hannes@cmpxchg.org \
    --cc=hughd@google.com \
    --cc=iamjoonsoo.kim@lge.com \
    --cc=jack@suse.cz \
    --cc=kirill.shutemov@linux.intel.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=lstoakes@gmail.com \
    --cc=mark.rutland@arm.com \
    --cc=mgorman@techsingularity.net \
    --cc=mhocko@suse.com \
    --cc=minchan@kernel.org \
    --cc=mingo@kernel.org \
    --cc=riel@redhat.com \
    --cc=ross.zwisler@linux.intel.com \
    --cc=shli@kernel.org \
    --cc=vdavydov.dev@gmail.com \
    --cc=vegard.nossum@oracle.com \
    --cc=ying.huang@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.