From: Roy Pledge <roy.pledge@nxp.com>
To: <linuxppc-dev@lists.ozlabs.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>, <oss@buserror.net>,
<robin.murphy@arm.com>
Cc: <madalin.bucur@nxp.com>, <roy.pledge@nxp.com>
Subject: [PATCH v3 01/11] soc/fsl/qbman: Use shared-dma-pool for BMan private memory allocations
Date: Mon, 1 May 2017 17:30:03 -0400 [thread overview]
Message-ID: <1493674213-963-2-git-send-email-roy.pledge@nxp.com> (raw)
In-Reply-To: <1493674213-963-1-git-send-email-roy.pledge@nxp.com>
Use the shared-memory-pool mechanism for free buffer proxy record
area allocation.
Signed-off-by: Roy Pledge <roy.pledge@nxp.com>
---
drivers/soc/fsl/qbman/bman_ccsr.c | 35 ++++++++++++++++++++++++++++++++++-
drivers/soc/fsl/qbman/bman_priv.h | 3 +++
2 files changed, 37 insertions(+), 1 deletion(-)
diff --git a/drivers/soc/fsl/qbman/bman_ccsr.c b/drivers/soc/fsl/qbman/bman_ccsr.c
index a8e8389..f126dbd 100644
--- a/drivers/soc/fsl/qbman/bman_ccsr.c
+++ b/drivers/soc/fsl/qbman/bman_ccsr.c
@@ -170,10 +170,11 @@ static int fsl_bman_probe(struct platform_device *pdev)
{
int ret, err_irq;
struct device *dev = &pdev->dev;
- struct device_node *node = dev->of_node;
+ struct device_node *mem_node, *node = dev->of_node;
struct resource *res;
u16 id, bm_pool_cnt;
u8 major, minor;
+ u64 size;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res) {
@@ -201,6 +202,38 @@ static int fsl_bman_probe(struct platform_device *pdev)
return -ENODEV;
}
+ /*
+ * If FBPR memory wasn't defined using the qbman compatiable string
+ * try using the of_reserved_mem_device method
+ */
+ if (!fbpr_a) {
+ ret = of_reserved_mem_device_init(dev);
+ if (ret) {
+ dev_err(dev, "of_reserved_mem_device_init() failed 0x%x\n",
+ ret);
+ return -ENODEV;
+ }
+ mem_node = of_parse_phandle(dev->of_node, "memory-region", 0);
+ if (mem_node) {
+ ret = of_property_read_u64(mem_node, "size", &size);
+ if (ret) {
+ dev_err(dev, "FBPR: of_address_to_resource fails 0x%x\n",
+ ret);
+ return -ENODEV;
+ }
+ fbpr_sz = size;
+ } else {
+ dev_err(dev, "No memory-region found for FBPR\n");
+ return -ENODEV;
+ }
+ if (!dma_zalloc_coherent(dev, fbpr_sz, &fbpr_a, 0)) {
+ dev_err(dev, "Alloc FBPR memory failed\n");
+ return -ENODEV;
+ }
+ }
+
+ dev_dbg(dev, "Allocated FBPR 0x%llx 0x%zx\n", fbpr_a, fbpr_sz);
+
bm_set_memory(fbpr_a, fbpr_sz);
err_irq = platform_get_irq(pdev, 0);
diff --git a/drivers/soc/fsl/qbman/bman_priv.h b/drivers/soc/fsl/qbman/bman_priv.h
index f6896a2..765a4bf 100644
--- a/drivers/soc/fsl/qbman/bman_priv.h
+++ b/drivers/soc/fsl/qbman/bman_priv.h
@@ -33,6 +33,9 @@
#include "dpaa_sys.h"
#include <soc/fsl/bman.h>
+#include <linux/dma-contiguous.h>
+#include <linux/of_address.h>
+#include <linux/dma-mapping.h>
/* Portal processing (interrupt) sources */
#define BM_PIRQ_RCRI 0x00000002 /* RCR Ring (below threshold) */
--
2.7.4
WARNING: multiple messages have this Message-ID (diff)
From: roy.pledge@nxp.com (Roy Pledge)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 01/11] soc/fsl/qbman: Use shared-dma-pool for BMan private memory allocations
Date: Mon, 1 May 2017 17:30:03 -0400 [thread overview]
Message-ID: <1493674213-963-2-git-send-email-roy.pledge@nxp.com> (raw)
In-Reply-To: <1493674213-963-1-git-send-email-roy.pledge@nxp.com>
Use the shared-memory-pool mechanism for free buffer proxy record
area allocation.
Signed-off-by: Roy Pledge <roy.pledge@nxp.com>
---
drivers/soc/fsl/qbman/bman_ccsr.c | 35 ++++++++++++++++++++++++++++++++++-
drivers/soc/fsl/qbman/bman_priv.h | 3 +++
2 files changed, 37 insertions(+), 1 deletion(-)
diff --git a/drivers/soc/fsl/qbman/bman_ccsr.c b/drivers/soc/fsl/qbman/bman_ccsr.c
index a8e8389..f126dbd 100644
--- a/drivers/soc/fsl/qbman/bman_ccsr.c
+++ b/drivers/soc/fsl/qbman/bman_ccsr.c
@@ -170,10 +170,11 @@ static int fsl_bman_probe(struct platform_device *pdev)
{
int ret, err_irq;
struct device *dev = &pdev->dev;
- struct device_node *node = dev->of_node;
+ struct device_node *mem_node, *node = dev->of_node;
struct resource *res;
u16 id, bm_pool_cnt;
u8 major, minor;
+ u64 size;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res) {
@@ -201,6 +202,38 @@ static int fsl_bman_probe(struct platform_device *pdev)
return -ENODEV;
}
+ /*
+ * If FBPR memory wasn't defined using the qbman compatiable string
+ * try using the of_reserved_mem_device method
+ */
+ if (!fbpr_a) {
+ ret = of_reserved_mem_device_init(dev);
+ if (ret) {
+ dev_err(dev, "of_reserved_mem_device_init() failed 0x%x\n",
+ ret);
+ return -ENODEV;
+ }
+ mem_node = of_parse_phandle(dev->of_node, "memory-region", 0);
+ if (mem_node) {
+ ret = of_property_read_u64(mem_node, "size", &size);
+ if (ret) {
+ dev_err(dev, "FBPR: of_address_to_resource fails 0x%x\n",
+ ret);
+ return -ENODEV;
+ }
+ fbpr_sz = size;
+ } else {
+ dev_err(dev, "No memory-region found for FBPR\n");
+ return -ENODEV;
+ }
+ if (!dma_zalloc_coherent(dev, fbpr_sz, &fbpr_a, 0)) {
+ dev_err(dev, "Alloc FBPR memory failed\n");
+ return -ENODEV;
+ }
+ }
+
+ dev_dbg(dev, "Allocated FBPR 0x%llx 0x%zx\n", fbpr_a, fbpr_sz);
+
bm_set_memory(fbpr_a, fbpr_sz);
err_irq = platform_get_irq(pdev, 0);
diff --git a/drivers/soc/fsl/qbman/bman_priv.h b/drivers/soc/fsl/qbman/bman_priv.h
index f6896a2..765a4bf 100644
--- a/drivers/soc/fsl/qbman/bman_priv.h
+++ b/drivers/soc/fsl/qbman/bman_priv.h
@@ -33,6 +33,9 @@
#include "dpaa_sys.h"
#include <soc/fsl/bman.h>
+#include <linux/dma-contiguous.h>
+#include <linux/of_address.h>
+#include <linux/dma-mapping.h>
/* Portal processing (interrupt) sources */
#define BM_PIRQ_RCRI 0x00000002 /* RCR Ring (below threshold) */
--
2.7.4
next prev parent reply other threads:[~2017-05-01 21:30 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-05-01 21:30 [PATCH v3 00/11] soc/fsl/qbman: Enable QBMan on ARM Platforms Roy Pledge
2017-05-01 21:30 ` Roy Pledge
2017-05-01 21:30 ` Roy Pledge [this message]
2017-05-01 21:30 ` [PATCH v3 01/11] soc/fsl/qbman: Use shared-dma-pool for BMan private memory allocations Roy Pledge
2017-05-01 21:30 ` [PATCH v3 02/11] soc/fsl/qbman: Use shared-dma-pool for QMan " Roy Pledge
2017-05-01 21:30 ` Roy Pledge
2017-05-01 21:30 ` [PATCH v3 03/11] dt-bindings: soc/fsl: Update reserved memory binding for QBMan Roy Pledge
2017-05-01 21:30 ` Roy Pledge
2017-05-01 21:30 ` [PATCH v3 04/11] soc/fsl/qbman: Drop set/clear_bits usage Roy Pledge
2017-05-01 21:30 ` Roy Pledge
2017-05-01 21:30 ` [PATCH v3 05/11] soc/fsl/qbman: Drop L1_CACHE_BYTES compile time check Roy Pledge
2017-05-01 21:30 ` Roy Pledge
2017-05-01 21:30 ` [PATCH v3 06/11] soc/fsl/qbman: Fix ARM32 typo Roy Pledge
2017-05-01 21:30 ` Roy Pledge
2017-05-01 21:30 ` [PATCH v3 07/11] soc/fsl/qbman: Rework ioremap() calls for ARM/PPC Roy Pledge
2017-05-01 21:30 ` Roy Pledge
2017-05-01 21:30 ` [PATCH v3 08/11] soc/fsl/qbman: add QMAN_REV32 Roy Pledge
2017-05-01 21:30 ` Roy Pledge
2017-05-01 21:30 ` [PATCH v3 09/11] soc/fsl/qbman: different register offsets on ARM Roy Pledge
2017-05-01 21:30 ` Roy Pledge
2017-05-01 21:30 ` [PATCH v3 10/11] soc/fsl/qbman: Add missing headers " Roy Pledge
2017-05-01 21:30 ` Roy Pledge
2017-05-01 21:30 ` [PATCH v3 11/11] fsl/soc/qbman: Enable FSL_LAYERSCAPE config " Roy Pledge
2017-05-01 21:30 ` Roy Pledge
2017-05-16 5:41 ` [PATCH v3 00/11] soc/fsl/qbman: Enable QBMan on ARM Platforms Scott Wood
2017-05-16 5:41 ` Scott Wood
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1493674213-963-2-git-send-email-roy.pledge@nxp.com \
--to=roy.pledge@nxp.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=madalin.bucur@nxp.com \
--cc=oss@buserror.net \
--cc=robin.murphy@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.