[PATCH 0/3] ARM64: dts: meson: GXBB and GXL pinctrl fixes

All of lore.kernel.org
 help / color / mirror / Atom feed

* [PATCH 0/3] ARM64: dts: meson: GXBB and GXL pinctrl fixes
@ 2017-05-23 14:21 ` Neil Armstrong
  0 siblings, 0 replies; 29+ messages in thread
From: Neil Armstrong @ 2017-05-23 14:21 UTC (permalink / raw)
  To: linus-amlogic

This patchset fixes the following :
 - bad gpio-ranges for GXL
 - bad pull-enable register base for GXBB & GXL

Neil Armstrong (3):
  ARM64: dts: meson-gxl: Fix pinctrl periphs gpio-ranges
  ARM64: dts: Fix GXL periphs pinctrl pull-enable register base
  ARM64: dts: Fix GXBB periphs pinctrl pull-enable register base

 arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi | 2 +-
 arch/arm64/boot/dts/amlogic/meson-gxl.dtsi  | 4 ++--
 2 files changed, 3 insertions(+), 3 deletions(-)

-- 
1.9.1

^ permalink raw reply	[flat|nested] 29+ messages in thread

* [PATCH 0/3] ARM64: dts: meson: GXBB and GXL pinctrl fixes
@ 2017-05-23 14:21 ` Neil Armstrong
  0 siblings, 0 replies; 29+ messages in thread
From: Neil Armstrong @ 2017-05-23 14:21 UTC (permalink / raw)
  To: khilman
  Cc: Neil Armstrong, linux-amlogic, linux-arm-kernel, linux-kernel,
	devicetree

This patchset fixes the following :
 - bad gpio-ranges for GXL
 - bad pull-enable register base for GXBB & GXL

Neil Armstrong (3):
  ARM64: dts: meson-gxl: Fix pinctrl periphs gpio-ranges
  ARM64: dts: Fix GXL periphs pinctrl pull-enable register base
  ARM64: dts: Fix GXBB periphs pinctrl pull-enable register base

 arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi | 2 +-
 arch/arm64/boot/dts/amlogic/meson-gxl.dtsi  | 4 ++--
 2 files changed, 3 insertions(+), 3 deletions(-)

-- 
1.9.1

^ permalink raw reply	[flat|nested] 29+ messages in thread

* [PATCH 0/3] ARM64: dts: meson: GXBB and GXL pinctrl fixes
@ 2017-05-23 14:21 ` Neil Armstrong
  0 siblings, 0 replies; 29+ messages in thread
From: Neil Armstrong @ 2017-05-23 14:21 UTC (permalink / raw)
  To: khilman-rdvid1DuHRBWk0Htik3J/w
  Cc: Neil Armstrong, linux-amlogic-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA,
	devicetree-u79uwXL29TY76Z2rM5mHXA

This patchset fixes the following :
 - bad gpio-ranges for GXL
 - bad pull-enable register base for GXBB & GXL

Neil Armstrong (3):
  ARM64: dts: meson-gxl: Fix pinctrl periphs gpio-ranges
  ARM64: dts: Fix GXL periphs pinctrl pull-enable register base
  ARM64: dts: Fix GXBB periphs pinctrl pull-enable register base

 arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi | 2 +-
 arch/arm64/boot/dts/amlogic/meson-gxl.dtsi  | 4 ++--
 2 files changed, 3 insertions(+), 3 deletions(-)

-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

^ permalink raw reply	[flat|nested] 29+ messages in thread

* [PATCH 0/3] ARM64: dts: meson: GXBB and GXL pinctrl fixes
@ 2017-05-23 14:21 ` Neil Armstrong
  0 siblings, 0 replies; 29+ messages in thread
From: Neil Armstrong @ 2017-05-23 14:21 UTC (permalink / raw)
  To: linux-arm-kernel

This patchset fixes the following :
 - bad gpio-ranges for GXL
 - bad pull-enable register base for GXBB & GXL

Neil Armstrong (3):
  ARM64: dts: meson-gxl: Fix pinctrl periphs gpio-ranges
  ARM64: dts: Fix GXL periphs pinctrl pull-enable register base
  ARM64: dts: Fix GXBB periphs pinctrl pull-enable register base

 arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi | 2 +-
 arch/arm64/boot/dts/amlogic/meson-gxl.dtsi  | 4 ++--
 2 files changed, 3 insertions(+), 3 deletions(-)

-- 
1.9.1

^ permalink raw reply	[flat|nested] 29+ messages in thread

* [PATCH 1/3] ARM64: dts: meson-gxl: Fix pinctrl periphs gpio-ranges
  2017-05-23 14:21 ` Neil Armstrong
  (?)
  (?)
@ 2017-05-23 14:21   ` Neil Armstrong
  -1 siblings, 0 replies; 29+ messages in thread
From: Neil Armstrong @ 2017-05-23 14:21 UTC (permalink / raw)
  To: linus-amlogic

The gpio-range was badly added on the GXL dtsi, the AO pin count is 10
instead of 14.

Fixes: 84412e4e857f ("ARM64: dts: meson-gxl: Add gpio-ranges properties")
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
 arch/arm64/boot/dts/amlogic/meson-gxl.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
index 3efad5f..4871ce5 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
@@ -244,7 +244,7 @@
 			reg-names = "mux", "pull", "pull-enable", "gpio";
 			gpio-controller;
 			#gpio-cells = <2>;
-			gpio-ranges = <&pinctrl_periphs 0 14 101>;
+			gpio-ranges = <&pinctrl_periphs 0 10 101>;
 		};
 
 		emmc_pins: emmc {
-- 
1.9.1

^ permalink raw reply related	[flat|nested] 29+ messages in thread

* [PATCH 1/3] ARM64: dts: meson-gxl: Fix pinctrl periphs gpio-ranges
@ 2017-05-23 14:21   ` Neil Armstrong
  0 siblings, 0 replies; 29+ messages in thread
From: Neil Armstrong @ 2017-05-23 14:21 UTC (permalink / raw)
  To: khilman
  Cc: Neil Armstrong, linux-amlogic, linux-arm-kernel, linux-kernel,
	devicetree

The gpio-range was badly added on the GXL dtsi, the AO pin count is 10
instead of 14.

Fixes: 84412e4e857f ("ARM64: dts: meson-gxl: Add gpio-ranges properties")
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
 arch/arm64/boot/dts/amlogic/meson-gxl.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
index 3efad5f..4871ce5 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
@@ -244,7 +244,7 @@
 			reg-names = "mux", "pull", "pull-enable", "gpio";
 			gpio-controller;
 			#gpio-cells = <2>;
-			gpio-ranges = <&pinctrl_periphs 0 14 101>;
+			gpio-ranges = <&pinctrl_periphs 0 10 101>;
 		};
 
 		emmc_pins: emmc {
-- 
1.9.1

^ permalink raw reply related	[flat|nested] 29+ messages in thread

* [PATCH 1/3] ARM64: dts: meson-gxl: Fix pinctrl periphs gpio-ranges
@ 2017-05-23 14:21   ` Neil Armstrong
  0 siblings, 0 replies; 29+ messages in thread
From: Neil Armstrong @ 2017-05-23 14:21 UTC (permalink / raw)
  To: khilman-rdvid1DuHRBWk0Htik3J/w
  Cc: Neil Armstrong, linux-amlogic-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA,
	devicetree-u79uwXL29TY76Z2rM5mHXA

The gpio-range was badly added on the GXL dtsi, the AO pin count is 10
instead of 14.

Fixes: 84412e4e857f ("ARM64: dts: meson-gxl: Add gpio-ranges properties")
Signed-off-by: Neil Armstrong <narmstrong-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>
---
 arch/arm64/boot/dts/amlogic/meson-gxl.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
index 3efad5f..4871ce5 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
@@ -244,7 +244,7 @@
 			reg-names = "mux", "pull", "pull-enable", "gpio";
 			gpio-controller;
 			#gpio-cells = <2>;
-			gpio-ranges = <&pinctrl_periphs 0 14 101>;
+			gpio-ranges = <&pinctrl_periphs 0 10 101>;
 		};
 
 		emmc_pins: emmc {
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

^ permalink raw reply related	[flat|nested] 29+ messages in thread

* [PATCH 1/3] ARM64: dts: meson-gxl: Fix pinctrl periphs gpio-ranges
@ 2017-05-23 14:21   ` Neil Armstrong
  0 siblings, 0 replies; 29+ messages in thread
From: Neil Armstrong @ 2017-05-23 14:21 UTC (permalink / raw)
  To: linux-arm-kernel

The gpio-range was badly added on the GXL dtsi, the AO pin count is 10
instead of 14.

Fixes: 84412e4e857f ("ARM64: dts: meson-gxl: Add gpio-ranges properties")
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
 arch/arm64/boot/dts/amlogic/meson-gxl.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
index 3efad5f..4871ce5 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
@@ -244,7 +244,7 @@
 			reg-names = "mux", "pull", "pull-enable", "gpio";
 			gpio-controller;
 			#gpio-cells = <2>;
-			gpio-ranges = <&pinctrl_periphs 0 14 101>;
+			gpio-ranges = <&pinctrl_periphs 0 10 101>;
 		};
 
 		emmc_pins: emmc {
-- 
1.9.1

^ permalink raw reply related	[flat|nested] 29+ messages in thread

* [PATCH 1/3] ARM64: dts: meson-gxl: Fix pinctrl periphs gpio-ranges
  2017-05-23 14:21   ` Neil Armstrong
  (?)
  (?)
@ 2017-05-24  8:39     ` Jerome Brunet
  -1 siblings, 0 replies; 29+ messages in thread
From: Jerome Brunet @ 2017-05-24  8:39 UTC (permalink / raw)
  To: linus-amlogic

On Tue, 2017-05-23 at 16:21 +0200, Neil Armstrong wrote:
> The gpio-range was badly added on the GXL dtsi, the AO pin count is 10
> instead of 14.
> 

Reviewed-by: Jerome Brunet <jbrunet@baylibre.com>

> Fixes: 84412e4e857f ("ARM64: dts: meson-gxl: Add gpio-ranges properties")
> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
> ---
> ?arch/arm64/boot/dts/amlogic/meson-gxl.dtsi | 2 +-
> ?1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
> b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
> index 3efad5f..4871ce5 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
> @@ -244,7 +244,7 @@
> ?			reg-names = "mux", "pull", "pull-enable", "gpio";
> ?			gpio-controller;
> ?			#gpio-cells = <2>;
> -			gpio-ranges = <&pinctrl_periphs 0 14 101>;
> +			gpio-ranges = <&pinctrl_periphs 0 10 101>;
> ?		};
> ?
> ?		emmc_pins: emmc {

^ permalink raw reply	[flat|nested] 29+ messages in thread

* Re: [PATCH 1/3] ARM64: dts: meson-gxl: Fix pinctrl periphs gpio-ranges
@ 2017-05-24  8:39     ` Jerome Brunet
  0 siblings, 0 replies; 29+ messages in thread
From: Jerome Brunet @ 2017-05-24  8:39 UTC (permalink / raw)
  To: Neil Armstrong, khilman
  Cc: linux-amlogic, linux-arm-kernel, linux-kernel, devicetree

On Tue, 2017-05-23 at 16:21 +0200, Neil Armstrong wrote:
> The gpio-range was badly added on the GXL dtsi, the AO pin count is 10
> instead of 14.
> 

Reviewed-by: Jerome Brunet <jbrunet@baylibre.com>

> Fixes: 84412e4e857f ("ARM64: dts: meson-gxl: Add gpio-ranges properties")
> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
> ---
>  arch/arm64/boot/dts/amlogic/meson-gxl.dtsi | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
> b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
> index 3efad5f..4871ce5 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
> @@ -244,7 +244,7 @@
>  			reg-names = "mux", "pull", "pull-enable", "gpio";
>  			gpio-controller;
>  			#gpio-cells = <2>;
> -			gpio-ranges = <&pinctrl_periphs 0 14 101>;
> +			gpio-ranges = <&pinctrl_periphs 0 10 101>;
>  		};
>  
>  		emmc_pins: emmc {

^ permalink raw reply	[flat|nested] 29+ messages in thread

* Re: [PATCH 1/3] ARM64: dts: meson-gxl: Fix pinctrl periphs gpio-ranges
@ 2017-05-24  8:39     ` Jerome Brunet
  0 siblings, 0 replies; 29+ messages in thread
From: Jerome Brunet @ 2017-05-24  8:39 UTC (permalink / raw)
  To: Neil Armstrong, khilman
  Cc: linux-amlogic, linux-kernel, linux-arm-kernel, devicetree

On Tue, 2017-05-23 at 16:21 +0200, Neil Armstrong wrote:
> The gpio-range was badly added on the GXL dtsi, the AO pin count is 10
> instead of 14.
> 

Reviewed-by: Jerome Brunet <jbrunet@baylibre.com>

> Fixes: 84412e4e857f ("ARM64: dts: meson-gxl: Add gpio-ranges properties")
> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
> ---
>  arch/arm64/boot/dts/amlogic/meson-gxl.dtsi | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
> b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
> index 3efad5f..4871ce5 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
> @@ -244,7 +244,7 @@
>  			reg-names = "mux", "pull", "pull-enable", "gpio";
>  			gpio-controller;
>  			#gpio-cells = <2>;
> -			gpio-ranges = <&pinctrl_periphs 0 14 101>;
> +			gpio-ranges = <&pinctrl_periphs 0 10 101>;
>  		};
>  
>  		emmc_pins: emmc {


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 29+ messages in thread

* [PATCH 1/3] ARM64: dts: meson-gxl: Fix pinctrl periphs gpio-ranges
@ 2017-05-24  8:39     ` Jerome Brunet
  0 siblings, 0 replies; 29+ messages in thread
From: Jerome Brunet @ 2017-05-24  8:39 UTC (permalink / raw)
  To: linux-arm-kernel

On Tue, 2017-05-23 at 16:21 +0200, Neil Armstrong wrote:
> The gpio-range was badly added on the GXL dtsi, the AO pin count is 10
> instead of 14.
> 

Reviewed-by: Jerome Brunet <jbrunet@baylibre.com>

> Fixes: 84412e4e857f ("ARM64: dts: meson-gxl: Add gpio-ranges properties")
> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
> ---
> ?arch/arm64/boot/dts/amlogic/meson-gxl.dtsi | 2 +-
> ?1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
> b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
> index 3efad5f..4871ce5 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
> @@ -244,7 +244,7 @@
> ?			reg-names = "mux", "pull", "pull-enable", "gpio";
> ?			gpio-controller;
> ?			#gpio-cells = <2>;
> -			gpio-ranges = <&pinctrl_periphs 0 14 101>;
> +			gpio-ranges = <&pinctrl_periphs 0 10 101>;
> ?		};
> ?
> ?		emmc_pins: emmc {

^ permalink raw reply	[flat|nested] 29+ messages in thread

* [PATCH 2/3] ARM64: dts: Fix GXL periphs pinctrl pull-enable register base
  2017-05-23 14:21 ` Neil Armstrong
  (?)
@ 2017-05-23 14:21   ` Neil Armstrong
  -1 siblings, 0 replies; 29+ messages in thread
From: Neil Armstrong @ 2017-05-23 14:21 UTC (permalink / raw)
  To: linus-amlogic

The pull-enable register base was wrongly copied from the GXBB pinctrl node,
but was not used yet.

Fixes: fb0fe92294a9 ("ARM64: dts: meson-gxl: Add pinctrl nodes")
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
 arch/arm64/boot/dts/amlogic/meson-gxl.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
index 4871ce5..57fe1f5 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
@@ -239,7 +239,7 @@
 		gpio: bank at 4b0 {
 			reg = <0x0 0x004b0 0x0 0x28>,
 			      <0x0 0x004e8 0x0 0x14>,
-			      <0x0 0x00120 0x0 0x14>,
+			      <0x0 0x00520 0x0 0x14>,
 			      <0x0 0x00430 0x0 0x40>;
 			reg-names = "mux", "pull", "pull-enable", "gpio";
 			gpio-controller;
-- 
1.9.1

^ permalink raw reply related	[flat|nested] 29+ messages in thread

* [PATCH 2/3] ARM64: dts: Fix GXL periphs pinctrl pull-enable register base
@ 2017-05-23 14:21   ` Neil Armstrong
  0 siblings, 0 replies; 29+ messages in thread
From: Neil Armstrong @ 2017-05-23 14:21 UTC (permalink / raw)
  To: khilman
  Cc: Neil Armstrong, linux-amlogic, linux-arm-kernel, linux-kernel,
	devicetree

The pull-enable register base was wrongly copied from the GXBB pinctrl node,
but was not used yet.

Fixes: fb0fe92294a9 ("ARM64: dts: meson-gxl: Add pinctrl nodes")
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
 arch/arm64/boot/dts/amlogic/meson-gxl.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
index 4871ce5..57fe1f5 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
@@ -239,7 +239,7 @@
 		gpio: bank@4b0 {
 			reg = <0x0 0x004b0 0x0 0x28>,
 			      <0x0 0x004e8 0x0 0x14>,
-			      <0x0 0x00120 0x0 0x14>,
+			      <0x0 0x00520 0x0 0x14>,
 			      <0x0 0x00430 0x0 0x40>;
 			reg-names = "mux", "pull", "pull-enable", "gpio";
 			gpio-controller;
-- 
1.9.1

^ permalink raw reply related	[flat|nested] 29+ messages in thread

* [PATCH 2/3] ARM64: dts: Fix GXL periphs pinctrl pull-enable register base
@ 2017-05-23 14:21   ` Neil Armstrong
  0 siblings, 0 replies; 29+ messages in thread
From: Neil Armstrong @ 2017-05-23 14:21 UTC (permalink / raw)
  To: linux-arm-kernel

The pull-enable register base was wrongly copied from the GXBB pinctrl node,
but was not used yet.

Fixes: fb0fe92294a9 ("ARM64: dts: meson-gxl: Add pinctrl nodes")
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
 arch/arm64/boot/dts/amlogic/meson-gxl.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
index 4871ce5..57fe1f5 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
@@ -239,7 +239,7 @@
 		gpio: bank at 4b0 {
 			reg = <0x0 0x004b0 0x0 0x28>,
 			      <0x0 0x004e8 0x0 0x14>,
-			      <0x0 0x00120 0x0 0x14>,
+			      <0x0 0x00520 0x0 0x14>,
 			      <0x0 0x00430 0x0 0x40>;
 			reg-names = "mux", "pull", "pull-enable", "gpio";
 			gpio-controller;
-- 
1.9.1

^ permalink raw reply related	[flat|nested] 29+ messages in thread

* [PATCH 2/3] ARM64: dts: Fix GXL periphs pinctrl pull-enable register base
  2017-05-23 14:21   ` Neil Armstrong
  (?)
@ 2017-05-24  8:39     ` Jerome Brunet
  -1 siblings, 0 replies; 29+ messages in thread
From: Jerome Brunet @ 2017-05-24  8:39 UTC (permalink / raw)
  To: linus-amlogic

On Tue, 2017-05-23 at 16:21 +0200, Neil Armstrong wrote:
> The pull-enable register base was wrongly copied from the GXBB pinctrl node,
> but was not used yet.

Reviewed-by: Jerome Brunet <jbrunet@baylibre.com>

> 
> Fixes: fb0fe92294a9 ("ARM64: dts: meson-gxl: Add pinctrl nodes")
> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
> ---
> ?arch/arm64/boot/dts/amlogic/meson-gxl.dtsi | 2 +-
> ?1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
> b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
> index 4871ce5..57fe1f5 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
> @@ -239,7 +239,7 @@
> ?		gpio: bank at 4b0 {
> ?			reg = <0x0 0x004b0 0x0 0x28>,
> ?			??????<0x0 0x004e8 0x0 0x14>,
> -			??????<0x0 0x00120 0x0 0x14>,
> +			??????<0x0 0x00520 0x0 0x14>,
> ?			??????<0x0 0x00430 0x0 0x40>;
> ?			reg-names = "mux", "pull", "pull-enable", "gpio";
> ?			gpio-controller;

^ permalink raw reply	[flat|nested] 29+ messages in thread

* Re: [PATCH 2/3] ARM64: dts: Fix GXL periphs pinctrl pull-enable register base
@ 2017-05-24  8:39     ` Jerome Brunet
  0 siblings, 0 replies; 29+ messages in thread
From: Jerome Brunet @ 2017-05-24  8:39 UTC (permalink / raw)
  To: Neil Armstrong, khilman
  Cc: linux-amlogic, linux-arm-kernel, linux-kernel, devicetree

On Tue, 2017-05-23 at 16:21 +0200, Neil Armstrong wrote:
> The pull-enable register base was wrongly copied from the GXBB pinctrl node,
> but was not used yet.

Reviewed-by: Jerome Brunet <jbrunet@baylibre.com>

> 
> Fixes: fb0fe92294a9 ("ARM64: dts: meson-gxl: Add pinctrl nodes")
> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
> ---
>  arch/arm64/boot/dts/amlogic/meson-gxl.dtsi | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
> b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
> index 4871ce5..57fe1f5 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
> @@ -239,7 +239,7 @@
>  		gpio: bank@4b0 {
>  			reg = <0x0 0x004b0 0x0 0x28>,
>  			      <0x0 0x004e8 0x0 0x14>,
> -			      <0x0 0x00120 0x0 0x14>,
> +			      <0x0 0x00520 0x0 0x14>,
>  			      <0x0 0x00430 0x0 0x40>;
>  			reg-names = "mux", "pull", "pull-enable", "gpio";
>  			gpio-controller;

^ permalink raw reply	[flat|nested] 29+ messages in thread

* [PATCH 2/3] ARM64: dts: Fix GXL periphs pinctrl pull-enable register base
@ 2017-05-24  8:39     ` Jerome Brunet
  0 siblings, 0 replies; 29+ messages in thread
From: Jerome Brunet @ 2017-05-24  8:39 UTC (permalink / raw)
  To: linux-arm-kernel

On Tue, 2017-05-23 at 16:21 +0200, Neil Armstrong wrote:
> The pull-enable register base was wrongly copied from the GXBB pinctrl node,
> but was not used yet.

Reviewed-by: Jerome Brunet <jbrunet@baylibre.com>

> 
> Fixes: fb0fe92294a9 ("ARM64: dts: meson-gxl: Add pinctrl nodes")
> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
> ---
> ?arch/arm64/boot/dts/amlogic/meson-gxl.dtsi | 2 +-
> ?1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
> b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
> index 4871ce5..57fe1f5 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
> @@ -239,7 +239,7 @@
> ?		gpio: bank at 4b0 {
> ?			reg = <0x0 0x004b0 0x0 0x28>,
> ?			??????<0x0 0x004e8 0x0 0x14>,
> -			??????<0x0 0x00120 0x0 0x14>,
> +			??????<0x0 0x00520 0x0 0x14>,
> ?			??????<0x0 0x00430 0x0 0x40>;
> ?			reg-names = "mux", "pull", "pull-enable", "gpio";
> ?			gpio-controller;

^ permalink raw reply	[flat|nested] 29+ messages in thread

* [PATCH 3/3] ARM64: dts: Fix GXBB periphs pinctrl pull-enable register base
  2017-05-23 14:21 ` Neil Armstrong
  (?)
  (?)
@ 2017-05-23 14:21   ` Neil Armstrong
  -1 siblings, 0 replies; 29+ messages in thread
From: Neil Armstrong @ 2017-05-23 14:21 UTC (permalink / raw)
  To: linus-amlogic

The pull-enable register base was wrongly copied from the meson8b pinctrl node,
but was not used yet.

Fixes: c328666d58aa ("ARM64: dts: amlogic: Add Meson GX dtsi from GXBB")
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
 arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
index 6f8b301..47ca44d 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
@@ -351,7 +351,7 @@
 		gpio: bank at 4b0 {
 			reg = <0x0 0x004b0 0x0 0x28>,
 			      <0x0 0x004e8 0x0 0x14>,
-			      <0x0 0x00120 0x0 0x14>,
+			      <0x0 0x00520 0x0 0x14>,
 			      <0x0 0x00430 0x0 0x40>;
 			reg-names = "mux", "pull", "pull-enable", "gpio";
 			gpio-controller;
-- 
1.9.1

^ permalink raw reply related	[flat|nested] 29+ messages in thread

* [PATCH 3/3] ARM64: dts: Fix GXBB periphs pinctrl pull-enable register base
@ 2017-05-23 14:21   ` Neil Armstrong
  0 siblings, 0 replies; 29+ messages in thread
From: Neil Armstrong @ 2017-05-23 14:21 UTC (permalink / raw)
  To: khilman
  Cc: Neil Armstrong, linux-amlogic, linux-arm-kernel, linux-kernel,
	devicetree

The pull-enable register base was wrongly copied from the meson8b pinctrl node,
but was not used yet.

Fixes: c328666d58aa ("ARM64: dts: amlogic: Add Meson GX dtsi from GXBB")
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
 arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
index 6f8b301..47ca44d 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
@@ -351,7 +351,7 @@
 		gpio: bank@4b0 {
 			reg = <0x0 0x004b0 0x0 0x28>,
 			      <0x0 0x004e8 0x0 0x14>,
-			      <0x0 0x00120 0x0 0x14>,
+			      <0x0 0x00520 0x0 0x14>,
 			      <0x0 0x00430 0x0 0x40>;
 			reg-names = "mux", "pull", "pull-enable", "gpio";
 			gpio-controller;
-- 
1.9.1

^ permalink raw reply related	[flat|nested] 29+ messages in thread

* [PATCH 3/3] ARM64: dts: Fix GXBB periphs pinctrl pull-enable register base
@ 2017-05-23 14:21   ` Neil Armstrong
  0 siblings, 0 replies; 29+ messages in thread
From: Neil Armstrong @ 2017-05-23 14:21 UTC (permalink / raw)
  To: khilman-rdvid1DuHRBWk0Htik3J/w
  Cc: Neil Armstrong, linux-amlogic-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA,
	devicetree-u79uwXL29TY76Z2rM5mHXA

The pull-enable register base was wrongly copied from the meson8b pinctrl node,
but was not used yet.

Fixes: c328666d58aa ("ARM64: dts: amlogic: Add Meson GX dtsi from GXBB")
Signed-off-by: Neil Armstrong <narmstrong-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>
---
 arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
index 6f8b301..47ca44d 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
@@ -351,7 +351,7 @@
 		gpio: bank@4b0 {
 			reg = <0x0 0x004b0 0x0 0x28>,
 			      <0x0 0x004e8 0x0 0x14>,
-			      <0x0 0x00120 0x0 0x14>,
+			      <0x0 0x00520 0x0 0x14>,
 			      <0x0 0x00430 0x0 0x40>;
 			reg-names = "mux", "pull", "pull-enable", "gpio";
 			gpio-controller;
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

^ permalink raw reply related	[flat|nested] 29+ messages in thread

* [PATCH 3/3] ARM64: dts: Fix GXBB periphs pinctrl pull-enable register base
@ 2017-05-23 14:21   ` Neil Armstrong
  0 siblings, 0 replies; 29+ messages in thread
From: Neil Armstrong @ 2017-05-23 14:21 UTC (permalink / raw)
  To: linux-arm-kernel

The pull-enable register base was wrongly copied from the meson8b pinctrl node,
but was not used yet.

Fixes: c328666d58aa ("ARM64: dts: amlogic: Add Meson GX dtsi from GXBB")
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
 arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
index 6f8b301..47ca44d 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
@@ -351,7 +351,7 @@
 		gpio: bank at 4b0 {
 			reg = <0x0 0x004b0 0x0 0x28>,
 			      <0x0 0x004e8 0x0 0x14>,
-			      <0x0 0x00120 0x0 0x14>,
+			      <0x0 0x00520 0x0 0x14>,
 			      <0x0 0x00430 0x0 0x40>;
 			reg-names = "mux", "pull", "pull-enable", "gpio";
 			gpio-controller;
-- 
1.9.1

^ permalink raw reply related	[flat|nested] 29+ messages in thread

* [PATCH 3/3] ARM64: dts: Fix GXBB periphs pinctrl pull-enable register base
  2017-05-23 14:21   ` Neil Armstrong
  (?)
  (?)
@ 2017-05-24  8:40     ` Jerome Brunet
  -1 siblings, 0 replies; 29+ messages in thread
From: Jerome Brunet @ 2017-05-24  8:40 UTC (permalink / raw)
  To: linus-amlogic

On Tue, 2017-05-23 at 16:21 +0200, Neil Armstrong wrote:
> The pull-enable register base was wrongly copied from the meson8b pinctrl
> node,
> but was not used yet.

Reviewed-by: Jerome Brunet <jbrunet@baylibre.com>

> 
> Fixes: c328666d58aa ("ARM64: dts: amlogic: Add Meson GX dtsi from GXBB")
> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
> ---
> ?arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi | 2 +-
> ?1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
> b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
> index 6f8b301..47ca44d 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
> @@ -351,7 +351,7 @@
> ?		gpio: bank at 4b0 {
> ?			reg = <0x0 0x004b0 0x0 0x28>,
> ?			??????<0x0 0x004e8 0x0 0x14>,
> -			??????<0x0 0x00120 0x0 0x14>,
> +			??????<0x0 0x00520 0x0 0x14>,
> ?			??????<0x0 0x00430 0x0 0x40>;
> ?			reg-names = "mux", "pull", "pull-enable", "gpio";
> ?			gpio-controller;

^ permalink raw reply	[flat|nested] 29+ messages in thread

* Re: [PATCH 3/3] ARM64: dts: Fix GXBB periphs pinctrl pull-enable register base
@ 2017-05-24  8:40     ` Jerome Brunet
  0 siblings, 0 replies; 29+ messages in thread
From: Jerome Brunet @ 2017-05-24  8:40 UTC (permalink / raw)
  To: Neil Armstrong, khilman
  Cc: linux-amlogic, linux-arm-kernel, linux-kernel, devicetree

On Tue, 2017-05-23 at 16:21 +0200, Neil Armstrong wrote:
> The pull-enable register base was wrongly copied from the meson8b pinctrl
> node,
> but was not used yet.

Reviewed-by: Jerome Brunet <jbrunet@baylibre.com>

> 
> Fixes: c328666d58aa ("ARM64: dts: amlogic: Add Meson GX dtsi from GXBB")
> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
> ---
>  arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
> b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
> index 6f8b301..47ca44d 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
> @@ -351,7 +351,7 @@
>  		gpio: bank@4b0 {
>  			reg = <0x0 0x004b0 0x0 0x28>,
>  			      <0x0 0x004e8 0x0 0x14>,
> -			      <0x0 0x00120 0x0 0x14>,
> +			      <0x0 0x00520 0x0 0x14>,
>  			      <0x0 0x00430 0x0 0x40>;
>  			reg-names = "mux", "pull", "pull-enable", "gpio";
>  			gpio-controller;

^ permalink raw reply	[flat|nested] 29+ messages in thread

* Re: [PATCH 3/3] ARM64: dts: Fix GXBB periphs pinctrl pull-enable register base
@ 2017-05-24  8:40     ` Jerome Brunet
  0 siblings, 0 replies; 29+ messages in thread
From: Jerome Brunet @ 2017-05-24  8:40 UTC (permalink / raw)
  To: Neil Armstrong, khilman-rdvid1DuHRBWk0Htik3J/w
  Cc: linux-amlogic-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA,
	devicetree-u79uwXL29TY76Z2rM5mHXA

On Tue, 2017-05-23 at 16:21 +0200, Neil Armstrong wrote:
> The pull-enable register base was wrongly copied from the meson8b pinctrl
> node,
> but was not used yet.

Reviewed-by: Jerome Brunet <jbrunet-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>

> 
> Fixes: c328666d58aa ("ARM64: dts: amlogic: Add Meson GX dtsi from GXBB")
> Signed-off-by: Neil Armstrong <narmstrong-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>
> ---
>  arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
> b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
> index 6f8b301..47ca44d 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
> @@ -351,7 +351,7 @@
>  		gpio: bank@4b0 {
>  			reg = <0x0 0x004b0 0x0 0x28>,
>  			      <0x0 0x004e8 0x0 0x14>,
> -			      <0x0 0x00120 0x0 0x14>,
> +			      <0x0 0x00520 0x0 0x14>,
>  			      <0x0 0x00430 0x0 0x40>;
>  			reg-names = "mux", "pull", "pull-enable", "gpio";
>  			gpio-controller;

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

^ permalink raw reply	[flat|nested] 29+ messages in thread

* [PATCH 3/3] ARM64: dts: Fix GXBB periphs pinctrl pull-enable register base
@ 2017-05-24  8:40     ` Jerome Brunet
  0 siblings, 0 replies; 29+ messages in thread
From: Jerome Brunet @ 2017-05-24  8:40 UTC (permalink / raw)
  To: linux-arm-kernel

On Tue, 2017-05-23 at 16:21 +0200, Neil Armstrong wrote:
> The pull-enable register base was wrongly copied from the meson8b pinctrl
> node,
> but was not used yet.

Reviewed-by: Jerome Brunet <jbrunet@baylibre.com>

> 
> Fixes: c328666d58aa ("ARM64: dts: amlogic: Add Meson GX dtsi from GXBB")
> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
> ---
> ?arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi | 2 +-
> ?1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
> b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
> index 6f8b301..47ca44d 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
> @@ -351,7 +351,7 @@
> ?		gpio: bank at 4b0 {
> ?			reg = <0x0 0x004b0 0x0 0x28>,
> ?			??????<0x0 0x004e8 0x0 0x14>,
> -			??????<0x0 0x00120 0x0 0x14>,
> +			??????<0x0 0x00520 0x0 0x14>,
> ?			??????<0x0 0x00430 0x0 0x40>;
> ?			reg-names = "mux", "pull", "pull-enable", "gpio";
> ?			gpio-controller;

^ permalink raw reply	[flat|nested] 29+ messages in thread

* [PATCH 0/3] ARM64: dts: meson: GXBB and GXL pinctrl fixes
  2017-05-23 14:21 ` Neil Armstrong
  (?)
@ 2017-05-30 22:07   ` Kevin Hilman
  -1 siblings, 0 replies; 29+ messages in thread
From: Kevin Hilman @ 2017-05-30 22:07 UTC (permalink / raw)
  To: linus-amlogic

Neil Armstrong <narmstrong@baylibre.com> writes:

> This patchset fixes the following :
>  - bad gpio-ranges for GXL
>  - bad pull-enable register base for GXBB & GXL

Applied with Jerome's reviewed-by tag added.

Kevin

^ permalink raw reply	[flat|nested] 29+ messages in thread

* Re: [PATCH 0/3] ARM64: dts: meson: GXBB and GXL pinctrl fixes
@ 2017-05-30 22:07   ` Kevin Hilman
  0 siblings, 0 replies; 29+ messages in thread
From: Kevin Hilman @ 2017-05-30 22:07 UTC (permalink / raw)
  To: Neil Armstrong; +Cc: linux-amlogic, linux-arm-kernel, linux-kernel, devicetree

Neil Armstrong <narmstrong@baylibre.com> writes:

> This patchset fixes the following :
>  - bad gpio-ranges for GXL
>  - bad pull-enable register base for GXBB & GXL

Applied with Jerome's reviewed-by tag added.

Kevin

^ permalink raw reply	[flat|nested] 29+ messages in thread

* [PATCH 0/3] ARM64: dts: meson: GXBB and GXL pinctrl fixes
@ 2017-05-30 22:07   ` Kevin Hilman
  0 siblings, 0 replies; 29+ messages in thread
From: Kevin Hilman @ 2017-05-30 22:07 UTC (permalink / raw)
  To: linux-arm-kernel

Neil Armstrong <narmstrong@baylibre.com> writes:

> This patchset fixes the following :
>  - bad gpio-ranges for GXL
>  - bad pull-enable register base for GXBB & GXL

Applied with Jerome's reviewed-by tag added.

Kevin

^ permalink raw reply	[flat|nested] 29+ messages in thread

end of thread, other threads:[~2017-05-30 22:07 UTC | newest]

Thread overview: 29+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2017-05-23 14:21 [PATCH 0/3] ARM64: dts: meson: GXBB and GXL pinctrl fixes Neil Armstrong
2017-05-23 14:21 ` Neil Armstrong
2017-05-23 14:21 ` Neil Armstrong
2017-05-23 14:21 ` Neil Armstrong
2017-05-23 14:21 ` [PATCH 1/3] ARM64: dts: meson-gxl: Fix pinctrl periphs gpio-ranges Neil Armstrong
2017-05-23 14:21   ` Neil Armstrong
2017-05-23 14:21   ` Neil Armstrong
2017-05-23 14:21   ` Neil Armstrong
2017-05-24  8:39   ` Jerome Brunet
2017-05-24  8:39     ` Jerome Brunet
2017-05-24  8:39     ` Jerome Brunet
2017-05-24  8:39     ` Jerome Brunet
2017-05-23 14:21 ` [PATCH 2/3] ARM64: dts: Fix GXL periphs pinctrl pull-enable register base Neil Armstrong
2017-05-23 14:21   ` Neil Armstrong
2017-05-23 14:21   ` Neil Armstrong
2017-05-24  8:39   ` Jerome Brunet
2017-05-24  8:39     ` Jerome Brunet
2017-05-24  8:39     ` Jerome Brunet
2017-05-23 14:21 ` [PATCH 3/3] ARM64: dts: Fix GXBB " Neil Armstrong
2017-05-23 14:21   ` Neil Armstrong
2017-05-23 14:21   ` Neil Armstrong
2017-05-23 14:21   ` Neil Armstrong
2017-05-24  8:40   ` Jerome Brunet
2017-05-24  8:40     ` Jerome Brunet
2017-05-24  8:40     ` Jerome Brunet
2017-05-24  8:40     ` Jerome Brunet
2017-05-30 22:07 ` [PATCH 0/3] ARM64: dts: meson: GXBB and GXL pinctrl fixes Kevin Hilman
2017-05-30 22:07   ` Kevin Hilman
2017-05-30 22:07   ` Kevin Hilman

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.