All of lore.kernel.org
 help / color / mirror / Atom feed
From: Sarangdhar Joshi <spjoshi@codeaurora.org>
To: Ohad Ben-Cohen <ohad@wizery.com>,
	Bjorn Andersson <bjorn.andersson@linaro.org>,
	Loic Pallardy <loic.pallardy@st.com>
Cc: Trilok Soni <tsoni@codeaurora.org>,
	linux-arm-msm@vger.kernel.org,
	Stephen Boyd <sboyd@codeaurora.org>,
	linux-kernel@vger.kernel.org, linux-remoteproc@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 1/2] remoteproc: Introduce rproc_{start,stop}() functions
Date: Fri, 26 May 2017 16:51:00 -0700	[thread overview]
Message-ID: <1495842661-8926-1-git-send-email-spjoshi@codeaurora.org> (raw)

In the context of recovering from crash, rproc_trigger_recovery() does
rproc_shutdown() followed by rproc_boot(). The remoteproc resources are
cleaned up in rproc_shutdown() and immediately reallocated in
rproc_boot() which is an unnecessary overhead. Furthermore, we want the
memory regions to be accessible after stopping the remote processor, to
be able to extract the memory content for a coredump.

This patch factors out the code in rproc_boot() and rproc_shutdown()
path and introduces rproc_{start,stop}() in order to avoid resource
allocation overhead.

Signed-off-by: Sarangdhar Joshi <spjoshi@codeaurora.org>
---

Changes from v2:

* Rebase on top of v4.12-rc1

 drivers/remoteproc/remoteproc_core.c | 143 +++++++++++++++++++++--------------
 1 file changed, 87 insertions(+), 56 deletions(-)

diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c
index 3dabb20..c8cb54b 100644
--- a/drivers/remoteproc/remoteproc_core.c
+++ b/drivers/remoteproc/remoteproc_core.c
@@ -847,6 +847,63 @@ static void rproc_resource_cleanup(struct rproc *rproc)
 		kref_put(&rvdev->refcount, rproc_vdev_release);
 }
 
+static int rproc_start(struct rproc *rproc, const struct firmware *fw)
+{
+	struct resource_table *table, *loaded_table;
+	struct device *dev = &rproc->dev;
+	int ret, tablesz;
+
+	/* look for the resource table */
+	table = rproc_find_rsc_table(rproc, fw, &tablesz);
+	if (!table) {
+		dev_err(dev, "Resouce table look up failed\n");
+		return -EINVAL;
+	}
+
+	/* load the ELF segments to memory */
+	ret = rproc_load_segments(rproc, fw);
+	if (ret) {
+		dev_err(dev, "Failed to load program segments: %d\n", ret);
+		return ret;
+	}
+
+	/*
+	 * The starting device has been given the rproc->cached_table as the
+	 * resource table. The address of the vring along with the other
+	 * allocated resources (carveouts etc) is stored in cached_table.
+	 * In order to pass this information to the remote device we must copy
+	 * this information to device memory. We also update the table_ptr so
+	 * that any subsequent changes will be applied to the loaded version.
+	 */
+	loaded_table = rproc_find_loaded_rsc_table(rproc, fw);
+	if (loaded_table) {
+		memcpy(loaded_table, rproc->cached_table, tablesz);
+		rproc->table_ptr = loaded_table;
+	}
+
+	/* power up the remote processor */
+	ret = rproc->ops->start(rproc);
+	if (ret) {
+		dev_err(dev, "can't start rproc %s: %d\n", rproc->name, ret);
+		return ret;
+	}
+
+	/* probe any subdevices for the remote processor */
+	ret = rproc_probe_subdevices(rproc);
+	if (ret) {
+		dev_err(dev, "failed to probe subdevices for %s: %d\n",
+			rproc->name, ret);
+		rproc->ops->stop(rproc);
+		return ret;
+	}
+
+	rproc->state = RPROC_RUNNING;
+
+	dev_info(dev, "remote processor %s is now up\n", rproc->name);
+
+	return 0;
+}
+
 /*
  * take a firmware and boot a remote processor with it.
  */
@@ -854,7 +911,7 @@ static int rproc_fw_boot(struct rproc *rproc, const struct firmware *fw)
 {
 	struct device *dev = &rproc->dev;
 	const char *name = rproc->firmware;
-	struct resource_table *table, *loaded_table;
+	struct resource_table *table;
 	int ret, tablesz;
 
 	ret = rproc_fw_sanity_check(rproc, fw);
@@ -905,50 +962,12 @@ static int rproc_fw_boot(struct rproc *rproc, const struct firmware *fw)
 		goto clean_up_resources;
 	}
 
-	/* load the ELF segments to memory */
-	ret = rproc_load_segments(rproc, fw);
-	if (ret) {
-		dev_err(dev, "Failed to load program segments: %d\n", ret);
-		goto clean_up_resources;
-	}
-
-	/*
-	 * The starting device has been given the rproc->cached_table as the
-	 * resource table. The address of the vring along with the other
-	 * allocated resources (carveouts etc) is stored in cached_table.
-	 * In order to pass this information to the remote device we must copy
-	 * this information to device memory. We also update the table_ptr so
-	 * that any subsequent changes will be applied to the loaded version.
-	 */
-	loaded_table = rproc_find_loaded_rsc_table(rproc, fw);
-	if (loaded_table) {
-		memcpy(loaded_table, rproc->cached_table, tablesz);
-		rproc->table_ptr = loaded_table;
-	}
-
-	/* power up the remote processor */
-	ret = rproc->ops->start(rproc);
-	if (ret) {
-		dev_err(dev, "can't start rproc %s: %d\n", rproc->name, ret);
+	ret = rproc_start(rproc, fw);
+	if (ret)
 		goto clean_up_resources;
-	}
-
-	/* probe any subdevices for the remote processor */
-	ret = rproc_probe_subdevices(rproc);
-	if (ret) {
-		dev_err(dev, "failed to probe subdevices for %s: %d\n",
-			rproc->name, ret);
-		goto stop_rproc;
-	}
-
-	rproc->state = RPROC_RUNNING;
-
-	dev_info(dev, "remote processor %s is now up\n", rproc->name);
 
 	return 0;
 
-stop_rproc:
-	rproc->ops->stop(rproc);
 clean_up_resources:
 	rproc_resource_cleanup(rproc);
 clean_up:
@@ -994,6 +1013,32 @@ static int rproc_trigger_auto_boot(struct rproc *rproc)
 	return ret;
 }
 
+static int rproc_stop(struct rproc *rproc)
+{
+	struct device *dev = &rproc->dev;
+	int ret;
+
+	/* remove any subdevices for the remote processor */
+	rproc_remove_subdevices(rproc);
+
+	/* power off the remote processor */
+	ret = rproc->ops->stop(rproc);
+	if (ret) {
+		dev_err(dev, "can't stop rproc: %d\n", ret);
+		return ret;
+	}
+
+	/* if in crash state, unlock crash handler */
+	if (rproc->state == RPROC_CRASHED)
+		complete_all(&rproc->crash_comp);
+
+	rproc->state = RPROC_OFFLINE;
+
+	dev_info(dev, "stopped remote processor %s\n", rproc->name);
+
+	return 0;
+}
+
 /**
  * rproc_trigger_recovery() - recover a remoteproc
  * @rproc: the remote processor
@@ -1163,14 +1208,9 @@ void rproc_shutdown(struct rproc *rproc)
 	if (!atomic_dec_and_test(&rproc->power))
 		goto out;
 
-	/* remove any subdevices for the remote processor */
-	rproc_remove_subdevices(rproc);
-
-	/* power off the remote processor */
-	ret = rproc->ops->stop(rproc);
+	ret = rproc_stop(rproc);
 	if (ret) {
 		atomic_inc(&rproc->power);
-		dev_err(dev, "can't stop rproc: %d\n", ret);
 		goto out;
 	}
 
@@ -1183,15 +1223,6 @@ void rproc_shutdown(struct rproc *rproc)
 	kfree(rproc->cached_table);
 	rproc->cached_table = NULL;
 	rproc->table_ptr = NULL;
-
-	/* if in crash state, unlock crash handler */
-	if (rproc->state == RPROC_CRASHED)
-		complete_all(&rproc->crash_comp);
-
-	rproc->state = RPROC_OFFLINE;
-
-	dev_info(dev, "stopped remote processor %s\n", rproc->name);
-
 out:
 	mutex_unlock(&rproc->lock);
 }
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

WARNING: multiple messages have this Message-ID (diff)
From: Sarangdhar Joshi <spjoshi@codeaurora.org>
To: Ohad Ben-Cohen <ohad@wizery.com>,
	Bjorn Andersson <bjorn.andersson@linaro.org>,
	Loic Pallardy <loic.pallardy@st.com>
Cc: Sarangdhar Joshi <spjoshi@codeaurora.org>,
	linux-remoteproc@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-arm-msm@vger.kernel.org,
	Stephen Boyd <sboyd@codeaurora.org>,
	Trilok Soni <tsoni@codeaurora.org>
Subject: [PATCH v3 1/2] remoteproc: Introduce rproc_{start,stop}() functions
Date: Fri, 26 May 2017 16:51:00 -0700	[thread overview]
Message-ID: <1495842661-8926-1-git-send-email-spjoshi@codeaurora.org> (raw)

In the context of recovering from crash, rproc_trigger_recovery() does
rproc_shutdown() followed by rproc_boot(). The remoteproc resources are
cleaned up in rproc_shutdown() and immediately reallocated in
rproc_boot() which is an unnecessary overhead. Furthermore, we want the
memory regions to be accessible after stopping the remote processor, to
be able to extract the memory content for a coredump.

This patch factors out the code in rproc_boot() and rproc_shutdown()
path and introduces rproc_{start,stop}() in order to avoid resource
allocation overhead.

Signed-off-by: Sarangdhar Joshi <spjoshi@codeaurora.org>
---

Changes from v2:

* Rebase on top of v4.12-rc1

 drivers/remoteproc/remoteproc_core.c | 143 +++++++++++++++++++++--------------
 1 file changed, 87 insertions(+), 56 deletions(-)

diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c
index 3dabb20..c8cb54b 100644
--- a/drivers/remoteproc/remoteproc_core.c
+++ b/drivers/remoteproc/remoteproc_core.c
@@ -847,6 +847,63 @@ static void rproc_resource_cleanup(struct rproc *rproc)
 		kref_put(&rvdev->refcount, rproc_vdev_release);
 }
 
+static int rproc_start(struct rproc *rproc, const struct firmware *fw)
+{
+	struct resource_table *table, *loaded_table;
+	struct device *dev = &rproc->dev;
+	int ret, tablesz;
+
+	/* look for the resource table */
+	table = rproc_find_rsc_table(rproc, fw, &tablesz);
+	if (!table) {
+		dev_err(dev, "Resouce table look up failed\n");
+		return -EINVAL;
+	}
+
+	/* load the ELF segments to memory */
+	ret = rproc_load_segments(rproc, fw);
+	if (ret) {
+		dev_err(dev, "Failed to load program segments: %d\n", ret);
+		return ret;
+	}
+
+	/*
+	 * The starting device has been given the rproc->cached_table as the
+	 * resource table. The address of the vring along with the other
+	 * allocated resources (carveouts etc) is stored in cached_table.
+	 * In order to pass this information to the remote device we must copy
+	 * this information to device memory. We also update the table_ptr so
+	 * that any subsequent changes will be applied to the loaded version.
+	 */
+	loaded_table = rproc_find_loaded_rsc_table(rproc, fw);
+	if (loaded_table) {
+		memcpy(loaded_table, rproc->cached_table, tablesz);
+		rproc->table_ptr = loaded_table;
+	}
+
+	/* power up the remote processor */
+	ret = rproc->ops->start(rproc);
+	if (ret) {
+		dev_err(dev, "can't start rproc %s: %d\n", rproc->name, ret);
+		return ret;
+	}
+
+	/* probe any subdevices for the remote processor */
+	ret = rproc_probe_subdevices(rproc);
+	if (ret) {
+		dev_err(dev, "failed to probe subdevices for %s: %d\n",
+			rproc->name, ret);
+		rproc->ops->stop(rproc);
+		return ret;
+	}
+
+	rproc->state = RPROC_RUNNING;
+
+	dev_info(dev, "remote processor %s is now up\n", rproc->name);
+
+	return 0;
+}
+
 /*
  * take a firmware and boot a remote processor with it.
  */
@@ -854,7 +911,7 @@ static int rproc_fw_boot(struct rproc *rproc, const struct firmware *fw)
 {
 	struct device *dev = &rproc->dev;
 	const char *name = rproc->firmware;
-	struct resource_table *table, *loaded_table;
+	struct resource_table *table;
 	int ret, tablesz;
 
 	ret = rproc_fw_sanity_check(rproc, fw);
@@ -905,50 +962,12 @@ static int rproc_fw_boot(struct rproc *rproc, const struct firmware *fw)
 		goto clean_up_resources;
 	}
 
-	/* load the ELF segments to memory */
-	ret = rproc_load_segments(rproc, fw);
-	if (ret) {
-		dev_err(dev, "Failed to load program segments: %d\n", ret);
-		goto clean_up_resources;
-	}
-
-	/*
-	 * The starting device has been given the rproc->cached_table as the
-	 * resource table. The address of the vring along with the other
-	 * allocated resources (carveouts etc) is stored in cached_table.
-	 * In order to pass this information to the remote device we must copy
-	 * this information to device memory. We also update the table_ptr so
-	 * that any subsequent changes will be applied to the loaded version.
-	 */
-	loaded_table = rproc_find_loaded_rsc_table(rproc, fw);
-	if (loaded_table) {
-		memcpy(loaded_table, rproc->cached_table, tablesz);
-		rproc->table_ptr = loaded_table;
-	}
-
-	/* power up the remote processor */
-	ret = rproc->ops->start(rproc);
-	if (ret) {
-		dev_err(dev, "can't start rproc %s: %d\n", rproc->name, ret);
+	ret = rproc_start(rproc, fw);
+	if (ret)
 		goto clean_up_resources;
-	}
-
-	/* probe any subdevices for the remote processor */
-	ret = rproc_probe_subdevices(rproc);
-	if (ret) {
-		dev_err(dev, "failed to probe subdevices for %s: %d\n",
-			rproc->name, ret);
-		goto stop_rproc;
-	}
-
-	rproc->state = RPROC_RUNNING;
-
-	dev_info(dev, "remote processor %s is now up\n", rproc->name);
 
 	return 0;
 
-stop_rproc:
-	rproc->ops->stop(rproc);
 clean_up_resources:
 	rproc_resource_cleanup(rproc);
 clean_up:
@@ -994,6 +1013,32 @@ static int rproc_trigger_auto_boot(struct rproc *rproc)
 	return ret;
 }
 
+static int rproc_stop(struct rproc *rproc)
+{
+	struct device *dev = &rproc->dev;
+	int ret;
+
+	/* remove any subdevices for the remote processor */
+	rproc_remove_subdevices(rproc);
+
+	/* power off the remote processor */
+	ret = rproc->ops->stop(rproc);
+	if (ret) {
+		dev_err(dev, "can't stop rproc: %d\n", ret);
+		return ret;
+	}
+
+	/* if in crash state, unlock crash handler */
+	if (rproc->state == RPROC_CRASHED)
+		complete_all(&rproc->crash_comp);
+
+	rproc->state = RPROC_OFFLINE;
+
+	dev_info(dev, "stopped remote processor %s\n", rproc->name);
+
+	return 0;
+}
+
 /**
  * rproc_trigger_recovery() - recover a remoteproc
  * @rproc: the remote processor
@@ -1163,14 +1208,9 @@ void rproc_shutdown(struct rproc *rproc)
 	if (!atomic_dec_and_test(&rproc->power))
 		goto out;
 
-	/* remove any subdevices for the remote processor */
-	rproc_remove_subdevices(rproc);
-
-	/* power off the remote processor */
-	ret = rproc->ops->stop(rproc);
+	ret = rproc_stop(rproc);
 	if (ret) {
 		atomic_inc(&rproc->power);
-		dev_err(dev, "can't stop rproc: %d\n", ret);
 		goto out;
 	}
 
@@ -1183,15 +1223,6 @@ void rproc_shutdown(struct rproc *rproc)
 	kfree(rproc->cached_table);
 	rproc->cached_table = NULL;
 	rproc->table_ptr = NULL;
-
-	/* if in crash state, unlock crash handler */
-	if (rproc->state == RPROC_CRASHED)
-		complete_all(&rproc->crash_comp);
-
-	rproc->state = RPROC_OFFLINE;
-
-	dev_info(dev, "stopped remote processor %s\n", rproc->name);
-
 out:
 	mutex_unlock(&rproc->lock);
 }
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

WARNING: multiple messages have this Message-ID (diff)
From: spjoshi@codeaurora.org (Sarangdhar Joshi)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 1/2] remoteproc: Introduce rproc_{start,stop}() functions
Date: Fri, 26 May 2017 16:51:00 -0700	[thread overview]
Message-ID: <1495842661-8926-1-git-send-email-spjoshi@codeaurora.org> (raw)

In the context of recovering from crash, rproc_trigger_recovery() does
rproc_shutdown() followed by rproc_boot(). The remoteproc resources are
cleaned up in rproc_shutdown() and immediately reallocated in
rproc_boot() which is an unnecessary overhead. Furthermore, we want the
memory regions to be accessible after stopping the remote processor, to
be able to extract the memory content for a coredump.

This patch factors out the code in rproc_boot() and rproc_shutdown()
path and introduces rproc_{start,stop}() in order to avoid resource
allocation overhead.

Signed-off-by: Sarangdhar Joshi <spjoshi@codeaurora.org>
---

Changes from v2:

* Rebase on top of v4.12-rc1

 drivers/remoteproc/remoteproc_core.c | 143 +++++++++++++++++++++--------------
 1 file changed, 87 insertions(+), 56 deletions(-)

diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c
index 3dabb20..c8cb54b 100644
--- a/drivers/remoteproc/remoteproc_core.c
+++ b/drivers/remoteproc/remoteproc_core.c
@@ -847,6 +847,63 @@ static void rproc_resource_cleanup(struct rproc *rproc)
 		kref_put(&rvdev->refcount, rproc_vdev_release);
 }
 
+static int rproc_start(struct rproc *rproc, const struct firmware *fw)
+{
+	struct resource_table *table, *loaded_table;
+	struct device *dev = &rproc->dev;
+	int ret, tablesz;
+
+	/* look for the resource table */
+	table = rproc_find_rsc_table(rproc, fw, &tablesz);
+	if (!table) {
+		dev_err(dev, "Resouce table look up failed\n");
+		return -EINVAL;
+	}
+
+	/* load the ELF segments to memory */
+	ret = rproc_load_segments(rproc, fw);
+	if (ret) {
+		dev_err(dev, "Failed to load program segments: %d\n", ret);
+		return ret;
+	}
+
+	/*
+	 * The starting device has been given the rproc->cached_table as the
+	 * resource table. The address of the vring along with the other
+	 * allocated resources (carveouts etc) is stored in cached_table.
+	 * In order to pass this information to the remote device we must copy
+	 * this information to device memory. We also update the table_ptr so
+	 * that any subsequent changes will be applied to the loaded version.
+	 */
+	loaded_table = rproc_find_loaded_rsc_table(rproc, fw);
+	if (loaded_table) {
+		memcpy(loaded_table, rproc->cached_table, tablesz);
+		rproc->table_ptr = loaded_table;
+	}
+
+	/* power up the remote processor */
+	ret = rproc->ops->start(rproc);
+	if (ret) {
+		dev_err(dev, "can't start rproc %s: %d\n", rproc->name, ret);
+		return ret;
+	}
+
+	/* probe any subdevices for the remote processor */
+	ret = rproc_probe_subdevices(rproc);
+	if (ret) {
+		dev_err(dev, "failed to probe subdevices for %s: %d\n",
+			rproc->name, ret);
+		rproc->ops->stop(rproc);
+		return ret;
+	}
+
+	rproc->state = RPROC_RUNNING;
+
+	dev_info(dev, "remote processor %s is now up\n", rproc->name);
+
+	return 0;
+}
+
 /*
  * take a firmware and boot a remote processor with it.
  */
@@ -854,7 +911,7 @@ static int rproc_fw_boot(struct rproc *rproc, const struct firmware *fw)
 {
 	struct device *dev = &rproc->dev;
 	const char *name = rproc->firmware;
-	struct resource_table *table, *loaded_table;
+	struct resource_table *table;
 	int ret, tablesz;
 
 	ret = rproc_fw_sanity_check(rproc, fw);
@@ -905,50 +962,12 @@ static int rproc_fw_boot(struct rproc *rproc, const struct firmware *fw)
 		goto clean_up_resources;
 	}
 
-	/* load the ELF segments to memory */
-	ret = rproc_load_segments(rproc, fw);
-	if (ret) {
-		dev_err(dev, "Failed to load program segments: %d\n", ret);
-		goto clean_up_resources;
-	}
-
-	/*
-	 * The starting device has been given the rproc->cached_table as the
-	 * resource table. The address of the vring along with the other
-	 * allocated resources (carveouts etc) is stored in cached_table.
-	 * In order to pass this information to the remote device we must copy
-	 * this information to device memory. We also update the table_ptr so
-	 * that any subsequent changes will be applied to the loaded version.
-	 */
-	loaded_table = rproc_find_loaded_rsc_table(rproc, fw);
-	if (loaded_table) {
-		memcpy(loaded_table, rproc->cached_table, tablesz);
-		rproc->table_ptr = loaded_table;
-	}
-
-	/* power up the remote processor */
-	ret = rproc->ops->start(rproc);
-	if (ret) {
-		dev_err(dev, "can't start rproc %s: %d\n", rproc->name, ret);
+	ret = rproc_start(rproc, fw);
+	if (ret)
 		goto clean_up_resources;
-	}
-
-	/* probe any subdevices for the remote processor */
-	ret = rproc_probe_subdevices(rproc);
-	if (ret) {
-		dev_err(dev, "failed to probe subdevices for %s: %d\n",
-			rproc->name, ret);
-		goto stop_rproc;
-	}
-
-	rproc->state = RPROC_RUNNING;
-
-	dev_info(dev, "remote processor %s is now up\n", rproc->name);
 
 	return 0;
 
-stop_rproc:
-	rproc->ops->stop(rproc);
 clean_up_resources:
 	rproc_resource_cleanup(rproc);
 clean_up:
@@ -994,6 +1013,32 @@ static int rproc_trigger_auto_boot(struct rproc *rproc)
 	return ret;
 }
 
+static int rproc_stop(struct rproc *rproc)
+{
+	struct device *dev = &rproc->dev;
+	int ret;
+
+	/* remove any subdevices for the remote processor */
+	rproc_remove_subdevices(rproc);
+
+	/* power off the remote processor */
+	ret = rproc->ops->stop(rproc);
+	if (ret) {
+		dev_err(dev, "can't stop rproc: %d\n", ret);
+		return ret;
+	}
+
+	/* if in crash state, unlock crash handler */
+	if (rproc->state == RPROC_CRASHED)
+		complete_all(&rproc->crash_comp);
+
+	rproc->state = RPROC_OFFLINE;
+
+	dev_info(dev, "stopped remote processor %s\n", rproc->name);
+
+	return 0;
+}
+
 /**
  * rproc_trigger_recovery() - recover a remoteproc
  * @rproc: the remote processor
@@ -1163,14 +1208,9 @@ void rproc_shutdown(struct rproc *rproc)
 	if (!atomic_dec_and_test(&rproc->power))
 		goto out;
 
-	/* remove any subdevices for the remote processor */
-	rproc_remove_subdevices(rproc);
-
-	/* power off the remote processor */
-	ret = rproc->ops->stop(rproc);
+	ret = rproc_stop(rproc);
 	if (ret) {
 		atomic_inc(&rproc->power);
-		dev_err(dev, "can't stop rproc: %d\n", ret);
 		goto out;
 	}
 
@@ -1183,15 +1223,6 @@ void rproc_shutdown(struct rproc *rproc)
 	kfree(rproc->cached_table);
 	rproc->cached_table = NULL;
 	rproc->table_ptr = NULL;
-
-	/* if in crash state, unlock crash handler */
-	if (rproc->state == RPROC_CRASHED)
-		complete_all(&rproc->crash_comp);
-
-	rproc->state = RPROC_OFFLINE;
-
-	dev_info(dev, "stopped remote processor %s\n", rproc->name);
-
 out:
 	mutex_unlock(&rproc->lock);
 }
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

             reply	other threads:[~2017-05-26 23:51 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-05-26 23:51 Sarangdhar Joshi [this message]
2017-05-26 23:51 ` [PATCH v3 1/2] remoteproc: Introduce rproc_{start,stop}() functions Sarangdhar Joshi
2017-05-26 23:51 ` Sarangdhar Joshi
2017-05-26 23:51 ` [PATCH v3 2/2] remoteproc: Modify recovery path to use rproc_{start, stop}() Sarangdhar Joshi
2017-05-26 23:51   ` Sarangdhar Joshi
2017-05-26 23:51   ` [PATCH v3 2/2] remoteproc: Modify recovery path to use rproc_{start,stop}() Sarangdhar Joshi
2017-05-27  1:12 ` [PATCH v3 1/2] remoteproc: Introduce rproc_{start,stop}() functions Bjorn Andersson
2017-05-27  1:12   ` Bjorn Andersson
2017-05-27  1:12   ` Bjorn Andersson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1495842661-8926-1-git-send-email-spjoshi@codeaurora.org \
    --to=spjoshi@codeaurora.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-remoteproc@vger.kernel.org \
    --cc=loic.pallardy@st.com \
    --cc=ohad@wizery.com \
    --cc=sboyd@codeaurora.org \
    --cc=tsoni@codeaurora.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.