From: Lyude Paul <lyude@redhat.com>
To: Paul Kocialkowski <paul.kocialkowski@linux.intel.com>,
intel-gfx@lists.freedesktop.org
Subject: Re: [PATCH i-g-t v3] tests/chamelium: Add common suspend and hibernate tests for DP and HDMI
Date: Mon, 19 Jun 2017 14:31:08 -0400 [thread overview]
Message-ID: <1497897068.8845.1.camel@redhat.com> (raw)
In-Reply-To: <20170619093905.4603-1-paul.kocialkowski@linux.intel.com>
On Mon, 2017-06-19 at 12:39 +0300, Paul Kocialkowski wrote:
> This adds two new tests: common-hpd-after-suspend and
> common-hpd-after-hibernate that are aimed at testing HPD change
> during
> suspend/hibernate for both DP and HDMI, at the same time.
>
> The interest in bringing this test up is to reduce the time spent in
> testing, with the downside of less precision regarding the test's
> outcome. The per-connector tests are still available to get a more
> precise idea of which connector causes a failure, when that happens.
>
> VGA is explicitly excluded from this test as there is currently no
> way of doing delayed hpd pulses for it.
>
> The generic hpd suspend/resume test code is split in a dedicated
> function, that allow testing one or all possible ports.
>
> Signed-off-by: Paul Kocialkowski <paul.kocialkowski@linux.intel.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Will push to git in just a little bit, thanks!
> ---
> tests/chamelium.c | 118
> +++++++++++++++++++++++++++++++++++++++++++++---------
> 1 file changed, 100 insertions(+), 18 deletions(-)
>
> diff --git a/tests/chamelium.c b/tests/chamelium.c
> index 76b14e95..3cf9f3b5 100644
> --- a/tests/chamelium.c
> +++ b/tests/chamelium.c
> @@ -143,8 +143,18 @@ wait_for_connector(data_t *data, struct
> chamelium_port *port,
> static void
> reset_state(data_t *data, struct chamelium_port *port)
> {
> + int p;
> +
> chamelium_reset(data->chamelium);
> - wait_for_connector(data, port, DRM_MODE_DISCONNECTED);
> +
> + if (port) {
> + wait_for_connector(data, port,
> DRM_MODE_DISCONNECTED);
> + } else {
> + for (p = 0; p < data->port_count; p++) {
> + port = data->ports[p];
> + wait_for_connector(data, port,
> DRM_MODE_DISCONNECTED);
> + }
> + }
> }
>
> static void
> @@ -206,36 +216,96 @@ test_edid_read(data_t *data, struct
> chamelium_port *port,
> }
>
> static void
> -test_suspend_resume_hpd(data_t *data, struct chamelium_port *port,
> - enum igt_suspend_state state,
> - enum igt_suspend_test test)
> +try_suspend_resume_hpd(data_t *data, struct chamelium_port *port,
> + enum igt_suspend_state state, enum
> igt_suspend_test test,
> + struct udev_monitor *mon, bool connected)
> {
> - struct udev_monitor *mon = igt_watch_hotplug();
> -
> - reset_state(data, port);
> + int p;
>
> igt_set_autoresume_delay(SUSPEND_RESUME_DELAY);
> igt_flush_hotplugs(mon);
>
> - /* Make sure we notice new connectors after resuming */
> - chamelium_async_hpd_pulse_start(data->chamelium, port,
> false,
> - SUSPEND_RESUME_DELAY / 2);
> + if (port) {
> + chamelium_async_hpd_pulse_start(data->chamelium,
> port,
> + connected,
> + SUSPEND_RESUME_DELAY
> / 2);
> + } else {
> + for (p = 0; p < data->port_count; p++) {
> + port = data->ports[p];
> + if (chamelium_port_get_type(port) ==
> DRM_MODE_CONNECTOR_VGA)
> + continue;
> +
> + chamelium_async_hpd_pulse_start(data-
> >chamelium, port,
> + connected,
> + SUSPEND_RESU
> ME_DELAY / 2);
> + }
> +
> + port = NULL;
> + }
> +
> igt_system_suspend_autoresume(state, test);
> chamelium_async_hpd_pulse_finish(data->chamelium);
>
> igt_assert(igt_hotplug_detected(mon, HOTPLUG_TIMEOUT));
> - igt_assert_eq(reprobe_connector(data, port),
> DRM_MODE_CONNECTED);
> + if (port) {
> + igt_assert_eq(reprobe_connector(data, port),
> connected ?
> + DRM_MODE_DISCONNECTED :
> DRM_MODE_CONNECTED);
> + } else {
> + for (p = 0; p < data->port_count; p++) {
> + port = data->ports[p];
> + if (chamelium_port_get_type(port) ==
> DRM_MODE_CONNECTOR_VGA)
> + continue;
> +
> + igt_assert_eq(reprobe_connector(data, port),
> connected ?
> + DRM_MODE_DISCONNECTED :
> + DRM_MODE_CONNECTED);
> + }
>
> - igt_flush_hotplugs(mon);
> + port = NULL;
> + }
> +}
> +
> +static void
> +test_suspend_resume_hpd(data_t *data, struct chamelium_port *port,
> + enum igt_suspend_state state,
> + enum igt_suspend_test test)
> +{
> + struct udev_monitor *mon = igt_watch_hotplug();
> +
> + reset_state(data, port);
> +
> + /* Make sure we notice new connectors after resuming */
> + try_suspend_resume_hpd(data, port, state, test, mon, false);
>
> /* Now make sure we notice disconnected connectors after
> resuming */
> - chamelium_async_hpd_pulse_start(data->chamelium, port, true,
> - SUSPEND_RESUME_DELAY / 2);
> - igt_system_suspend_autoresume(state, test);
> - chamelium_async_hpd_pulse_finish(data->chamelium);
> + try_suspend_resume_hpd(data, port, state, test, mon, true);
>
> - igt_assert(igt_hotplug_detected(mon, HOTPLUG_TIMEOUT));
> - igt_assert_eq(reprobe_connector(data, port),
> DRM_MODE_DISCONNECTED);
> + igt_cleanup_hotplug(mon);
> +}
> +
> +static void
> +test_suspend_resume_hpd_common(data_t *data, enum igt_suspend_state
> state,
> + enum igt_suspend_test test)
> +{
> + struct udev_monitor *mon = igt_watch_hotplug();
> + struct chamelium_port *port;
> + int p;
> +
> + for (p = 0; p < data->port_count; p++) {
> + port = data->ports[p];
> + if (chamelium_port_get_type(port) ==
> DRM_MODE_CONNECTOR_VGA)
> + continue;
> +
> + igt_debug("Testing port %s\n",
> chamelium_port_get_name(port));
> + }
> +
> + reset_state(data, NULL);
> +
> + /* Make sure we notice new connectors after resuming */
> + try_suspend_resume_hpd(data, NULL, state, test, mon, false);
> +
> + /* Now make sure we notice disconnected connectors after
> resuming */
> + try_suspend_resume_hpd(data, NULL, state, test, mon, true);
>
> igt_cleanup_hotplug(mon);
> }
> @@ -750,6 +820,18 @@ igt_main
> test_hpd_without_ddc(&data, port);
> }
>
> + igt_subtest_group {
> + igt_subtest("common-hpd-after-suspend")
> + test_suspend_resume_hpd_common(&data,
> + SUSPEND_STATE
> _MEM,
> + SUSPEND_TEST_
> NONE);
> +
> + igt_subtest("common-hpd-after-hibernate")
> + test_suspend_resume_hpd_common(&data,
> + SUSPEND_STATE
> _DISK,
> + SUSPEND_TEST_
> DEVICES);
> + }
> +
> igt_fixture {
> close(data.drm_fd);
> }
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
prev parent reply other threads:[~2017-06-19 18:31 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-06-19 9:39 [PATCH i-g-t v3] tests/chamelium: Add common suspend and hibernate tests for DP and HDMI Paul Kocialkowski
2017-06-19 18:31 ` Lyude Paul [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1497897068.8845.1.camel@redhat.com \
--to=lyude@redhat.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=paul.kocialkowski@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.