From: Paul Kocialkowski <paul.kocialkowski@linux.intel.com>
To: intel-gfx@lists.freedesktop.org
Cc: Lyude <lyude@redhat.com>
Subject: [PATCH i-g-t v3] tests/chamelium: Add common suspend and hibernate tests for DP and HDMI
Date: Mon, 19 Jun 2017 12:39:05 +0300 [thread overview]
Message-ID: <20170619093905.4603-1-paul.kocialkowski@linux.intel.com> (raw)
This adds two new tests: common-hpd-after-suspend and
common-hpd-after-hibernate that are aimed at testing HPD change during
suspend/hibernate for both DP and HDMI, at the same time.
The interest in bringing this test up is to reduce the time spent in
testing, with the downside of less precision regarding the test's
outcome. The per-connector tests are still available to get a more
precise idea of which connector causes a failure, when that happens.
VGA is explicitly excluded from this test as there is currently no
way of doing delayed hpd pulses for it.
The generic hpd suspend/resume test code is split in a dedicated
function, that allow testing one or all possible ports.
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@linux.intel.com>
---
tests/chamelium.c | 118 +++++++++++++++++++++++++++++++++++++++++++++---------
1 file changed, 100 insertions(+), 18 deletions(-)
diff --git a/tests/chamelium.c b/tests/chamelium.c
index 76b14e95..3cf9f3b5 100644
--- a/tests/chamelium.c
+++ b/tests/chamelium.c
@@ -143,8 +143,18 @@ wait_for_connector(data_t *data, struct chamelium_port *port,
static void
reset_state(data_t *data, struct chamelium_port *port)
{
+ int p;
+
chamelium_reset(data->chamelium);
- wait_for_connector(data, port, DRM_MODE_DISCONNECTED);
+
+ if (port) {
+ wait_for_connector(data, port, DRM_MODE_DISCONNECTED);
+ } else {
+ for (p = 0; p < data->port_count; p++) {
+ port = data->ports[p];
+ wait_for_connector(data, port, DRM_MODE_DISCONNECTED);
+ }
+ }
}
static void
@@ -206,36 +216,96 @@ test_edid_read(data_t *data, struct chamelium_port *port,
}
static void
-test_suspend_resume_hpd(data_t *data, struct chamelium_port *port,
- enum igt_suspend_state state,
- enum igt_suspend_test test)
+try_suspend_resume_hpd(data_t *data, struct chamelium_port *port,
+ enum igt_suspend_state state, enum igt_suspend_test test,
+ struct udev_monitor *mon, bool connected)
{
- struct udev_monitor *mon = igt_watch_hotplug();
-
- reset_state(data, port);
+ int p;
igt_set_autoresume_delay(SUSPEND_RESUME_DELAY);
igt_flush_hotplugs(mon);
- /* Make sure we notice new connectors after resuming */
- chamelium_async_hpd_pulse_start(data->chamelium, port, false,
- SUSPEND_RESUME_DELAY / 2);
+ if (port) {
+ chamelium_async_hpd_pulse_start(data->chamelium, port,
+ connected,
+ SUSPEND_RESUME_DELAY / 2);
+ } else {
+ for (p = 0; p < data->port_count; p++) {
+ port = data->ports[p];
+ if (chamelium_port_get_type(port) == DRM_MODE_CONNECTOR_VGA)
+ continue;
+
+ chamelium_async_hpd_pulse_start(data->chamelium, port,
+ connected,
+ SUSPEND_RESUME_DELAY / 2);
+ }
+
+ port = NULL;
+ }
+
igt_system_suspend_autoresume(state, test);
chamelium_async_hpd_pulse_finish(data->chamelium);
igt_assert(igt_hotplug_detected(mon, HOTPLUG_TIMEOUT));
- igt_assert_eq(reprobe_connector(data, port), DRM_MODE_CONNECTED);
+ if (port) {
+ igt_assert_eq(reprobe_connector(data, port), connected ?
+ DRM_MODE_DISCONNECTED : DRM_MODE_CONNECTED);
+ } else {
+ for (p = 0; p < data->port_count; p++) {
+ port = data->ports[p];
+ if (chamelium_port_get_type(port) == DRM_MODE_CONNECTOR_VGA)
+ continue;
+
+ igt_assert_eq(reprobe_connector(data, port), connected ?
+ DRM_MODE_DISCONNECTED :
+ DRM_MODE_CONNECTED);
+ }
- igt_flush_hotplugs(mon);
+ port = NULL;
+ }
+}
+
+static void
+test_suspend_resume_hpd(data_t *data, struct chamelium_port *port,
+ enum igt_suspend_state state,
+ enum igt_suspend_test test)
+{
+ struct udev_monitor *mon = igt_watch_hotplug();
+
+ reset_state(data, port);
+
+ /* Make sure we notice new connectors after resuming */
+ try_suspend_resume_hpd(data, port, state, test, mon, false);
/* Now make sure we notice disconnected connectors after resuming */
- chamelium_async_hpd_pulse_start(data->chamelium, port, true,
- SUSPEND_RESUME_DELAY / 2);
- igt_system_suspend_autoresume(state, test);
- chamelium_async_hpd_pulse_finish(data->chamelium);
+ try_suspend_resume_hpd(data, port, state, test, mon, true);
- igt_assert(igt_hotplug_detected(mon, HOTPLUG_TIMEOUT));
- igt_assert_eq(reprobe_connector(data, port), DRM_MODE_DISCONNECTED);
+ igt_cleanup_hotplug(mon);
+}
+
+static void
+test_suspend_resume_hpd_common(data_t *data, enum igt_suspend_state state,
+ enum igt_suspend_test test)
+{
+ struct udev_monitor *mon = igt_watch_hotplug();
+ struct chamelium_port *port;
+ int p;
+
+ for (p = 0; p < data->port_count; p++) {
+ port = data->ports[p];
+ if (chamelium_port_get_type(port) == DRM_MODE_CONNECTOR_VGA)
+ continue;
+
+ igt_debug("Testing port %s\n", chamelium_port_get_name(port));
+ }
+
+ reset_state(data, NULL);
+
+ /* Make sure we notice new connectors after resuming */
+ try_suspend_resume_hpd(data, NULL, state, test, mon, false);
+
+ /* Now make sure we notice disconnected connectors after resuming */
+ try_suspend_resume_hpd(data, NULL, state, test, mon, true);
igt_cleanup_hotplug(mon);
}
@@ -750,6 +820,18 @@ igt_main
test_hpd_without_ddc(&data, port);
}
+ igt_subtest_group {
+ igt_subtest("common-hpd-after-suspend")
+ test_suspend_resume_hpd_common(&data,
+ SUSPEND_STATE_MEM,
+ SUSPEND_TEST_NONE);
+
+ igt_subtest("common-hpd-after-hibernate")
+ test_suspend_resume_hpd_common(&data,
+ SUSPEND_STATE_DISK,
+ SUSPEND_TEST_DEVICES);
+ }
+
igt_fixture {
close(data.drm_fd);
}
--
2.13.1
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
next reply other threads:[~2017-06-19 9:39 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-06-19 9:39 Paul Kocialkowski [this message]
2017-06-19 18:31 ` [PATCH i-g-t v3] tests/chamelium: Add common suspend and hibernate tests for DP and HDMI Lyude Paul
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170619093905.4603-1-paul.kocialkowski@linux.intel.com \
--to=paul.kocialkowski@linux.intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=lyude@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.