All of lore.kernel.org
 help / color / mirror / Atom feed
From: Ram Pai <linuxram@us.ibm.com>
To: linuxppc-dev@lists.ozlabs.org, linux-kernel@vger.kernel.org,
	linux-arch@vger.kernel.org, linux-mm@kvack.org, x86@kernel.org,
	linux-doc@vger.kernel.org, linux-kselftest@vger.kernel.org
Cc: benh@kernel.crashing.org, paulus@samba.org, mpe@ellerman.id.au,
	khandual@linux.vnet.ibm.com, aneesh.kumar@linux.vnet.ibm.com,
	bsingharora@gmail.com, dave.hansen@intel.com, hbabu@us.ibm.com,
	linuxram@us.ibm.com, arnd@arndb.de, akpm@linux-foundation.org,
	corbet@lwn.net, mingo@redhat.com
Subject: [RFC v3 04/23] powerpc: Free up four 64K PTE bits in 64K backed HPTE pages
Date: Wed, 21 Jun 2017 18:39:20 -0700	[thread overview]
Message-ID: <1498095579-6790-5-git-send-email-linuxram@us.ibm.com> (raw)
In-Reply-To: <1498095579-6790-1-git-send-email-linuxram@us.ibm.com>

Rearrange 64K PTE bits to  free  up  bits 3, 4, 5  and  6
in the 64K backed HPTE pages. This along with the earlier
patch will entirely free up the four bits from 64K PTE.
The bit numbers are big-endian as defined in the ISA3.0

This patch does the following change to 64K PTE that is
backed by 64K HPTE.

H_PAGE_F_SECOND which occupied bit 4 moves to the second part
        of the pte.
H_PAGE_F_GIX which  occupied bit 5, 6 and 7 also moves to the
        second part of the pte.

since bit 7 is now freed up, we move H_PAGE_BUSY from bit 9
to bit 7. Trying to minimize gaps so that contiguous bits
can be allocated if needed in the future.

The second part of the PTE will hold
(H_PAGE_F_SECOND|H_PAGE_F_GIX) at bit 60,61,62,63.

The above PTE changes is applicable to hugetlbpages aswell.

Signed-off-by: Ram Pai <linuxram@us.ibm.com>
---
 arch/powerpc/include/asm/book3s/64/hash-64k.h | 28 +++++++++------------------
 arch/powerpc/mm/hash64_64k.c                  | 17 ++++++++--------
 arch/powerpc/mm/hugetlbpage-hash64.c          | 16 ++++++---------
 3 files changed, 23 insertions(+), 38 deletions(-)

diff --git a/arch/powerpc/include/asm/book3s/64/hash-64k.h b/arch/powerpc/include/asm/book3s/64/hash-64k.h
index 4bac70a..7b5dbf3 100644
--- a/arch/powerpc/include/asm/book3s/64/hash-64k.h
+++ b/arch/powerpc/include/asm/book3s/64/hash-64k.h
@@ -12,11 +12,8 @@
  */
 #define H_PAGE_COMBO   _RPAGE_RPN0 /* this is a combo 4k page */
 #define H_PAGE_4K_PFN  _RPAGE_RPN1 /* PFN is for a single 4k page */
-#define H_PAGE_F_SECOND	_RPAGE_RSV2	/* HPTE is in 2ndary HPTEG */
-#define H_PAGE_F_GIX	(_RPAGE_RSV3 | _RPAGE_RSV4 | _RPAGE_RPN44)
-#define H_PAGE_F_GIX_SHIFT	56
 
-#define H_PAGE_BUSY	_RPAGE_RPN42     /* software: PTE & hash are busy */
+#define H_PAGE_BUSY	_RPAGE_RPN44     /* software: PTE & hash are busy */
 #define H_PAGE_HASHPTE	_RPAGE_RPN43    /* PTE has associated HPTE */
 
 /*
@@ -26,8 +23,7 @@
 #define H_PAGE_THP_HUGE  H_PAGE_4K_PFN
 
 /* PTE flags to conserve for HPTE identification */
-#define _PAGE_HPTEFLAGS (H_PAGE_BUSY | H_PAGE_F_SECOND | \
-			 H_PAGE_F_GIX | H_PAGE_HASHPTE | H_PAGE_COMBO)
+#define _PAGE_HPTEFLAGS (H_PAGE_BUSY | H_PAGE_HASHPTE | H_PAGE_COMBO)
 /*
  * we support 16 fragments per PTE page of 64K size.
  */
@@ -55,24 +51,18 @@ static inline real_pte_t __real_pte(pte_t pte, pte_t *ptep)
 	unsigned long *hidxp;
 
 	rpte.pte = pte;
-	rpte.hidx = 0;
-	if (pte_val(pte) & H_PAGE_COMBO) {
-		/*
-		 * Make sure we order the hidx load against the H_PAGE_COMBO
-		 * check. The store side ordering is done in __hash_page_4K
-		 */
-		smp_rmb();
-		hidxp = (unsigned long *)(ptep + PTRS_PER_PTE);
-		rpte.hidx = *hidxp;
-	}
+	/*
+	 * The store side ordering is done in set_hidx_slot()
+	 */
+	smp_rmb();
+	hidxp = (unsigned long *)(ptep + PTRS_PER_PTE);
+	rpte.hidx = *hidxp;
 	return rpte;
 }
 
 static inline unsigned long __rpte_to_hidx(real_pte_t rpte, unsigned long index)
 {
-	if ((pte_val(rpte.pte) & H_PAGE_COMBO))
-		return (rpte.hidx >> (index<<2)) & 0xf;
-	return (pte_val(rpte.pte) >> H_PAGE_F_GIX_SHIFT) & 0xf;
+	return ((rpte.hidx >> (index<<2)) & 0xfUL);
 }
 
 static inline unsigned long set_hidx_slot(pte_t *ptep, real_pte_t rpte,
diff --git a/arch/powerpc/mm/hash64_64k.c b/arch/powerpc/mm/hash64_64k.c
index a16cd28..5cbdaa9 100644
--- a/arch/powerpc/mm/hash64_64k.c
+++ b/arch/powerpc/mm/hash64_64k.c
@@ -231,6 +231,7 @@ int __hash_page_64K(unsigned long ea, unsigned long access,
 		    unsigned long vsid, pte_t *ptep, unsigned long trap,
 		    unsigned long flags, int ssize)
 {
+	real_pte_t rpte;
 	unsigned long hpte_group;
 	unsigned long rflags, pa;
 	unsigned long old_pte, new_pte;
@@ -267,6 +268,7 @@ int __hash_page_64K(unsigned long ea, unsigned long access,
 	} while (!pte_xchg(ptep, __pte(old_pte), __pte(new_pte)));
 
 	rflags = htab_convert_pte_flags(new_pte);
+	rpte = __real_pte(__pte(old_pte), ptep);
 
 	if (cpu_has_feature(CPU_FTR_NOEXECUTE) &&
 	    !cpu_has_feature(CPU_FTR_COHERENT_ICACHE))
@@ -274,16 +276,13 @@ int __hash_page_64K(unsigned long ea, unsigned long access,
 
 	vpn  = hpt_vpn(ea, vsid, ssize);
 	if (unlikely(old_pte & H_PAGE_HASHPTE)) {
+		unsigned long gslot;
+
 		/*
 		 * There MIGHT be an HPTE for this pte
 		 */
-		hash = hpt_hash(vpn, shift, ssize);
-		if (old_pte & H_PAGE_F_SECOND)
-			hash = ~hash;
-		slot = (hash & htab_hash_mask) * HPTES_PER_GROUP;
-		slot += (old_pte & H_PAGE_F_GIX) >> H_PAGE_F_GIX_SHIFT;
-
-		if (mmu_hash_ops.hpte_updatepp(slot, rflags, vpn, MMU_PAGE_64K,
+		gslot = get_hidx_gslot(vpn, shift, ssize, rpte, 0);
+		if (mmu_hash_ops.hpte_updatepp(gslot, rflags, vpn, MMU_PAGE_64K,
 					       MMU_PAGE_64K, ssize,
 					       flags) == -1)
 			old_pte &= ~_PAGE_HPTEFLAGS;
@@ -332,9 +331,9 @@ int __hash_page_64K(unsigned long ea, unsigned long access,
 					   MMU_PAGE_64K, MMU_PAGE_64K, old_pte);
 			return -1;
 		}
+
 		new_pte = (new_pte & ~_PAGE_HPTEFLAGS) | H_PAGE_HASHPTE;
-		new_pte |= (slot << H_PAGE_F_GIX_SHIFT) &
-			(H_PAGE_F_SECOND | H_PAGE_F_GIX);
+		new_pte |= set_hidx_slot(ptep, rpte, 0, slot);
 	}
 	*ptep = __pte(new_pte & ~H_PAGE_BUSY);
 	return 0;
diff --git a/arch/powerpc/mm/hugetlbpage-hash64.c b/arch/powerpc/mm/hugetlbpage-hash64.c
index a84bb44..239ca86 100644
--- a/arch/powerpc/mm/hugetlbpage-hash64.c
+++ b/arch/powerpc/mm/hugetlbpage-hash64.c
@@ -22,6 +22,7 @@ int __hash_page_huge(unsigned long ea, unsigned long access, unsigned long vsid,
 		     pte_t *ptep, unsigned long trap, unsigned long flags,
 		     int ssize, unsigned int shift, unsigned int mmu_psize)
 {
+	real_pte_t rpte;
 	unsigned long vpn;
 	unsigned long old_pte, new_pte;
 	unsigned long rflags, pa, sz;
@@ -61,6 +62,7 @@ int __hash_page_huge(unsigned long ea, unsigned long access, unsigned long vsid,
 	} while(!pte_xchg(ptep, __pte(old_pte), __pte(new_pte)));
 
 	rflags = htab_convert_pte_flags(new_pte);
+	rpte = __real_pte(__pte(old_pte), ptep);
 
 	sz = ((1UL) << shift);
 	if (!cpu_has_feature(CPU_FTR_COHERENT_ICACHE))
@@ -71,15 +73,10 @@ int __hash_page_huge(unsigned long ea, unsigned long access, unsigned long vsid,
 	/* Check if pte already has an hpte (case 2) */
 	if (unlikely(old_pte & H_PAGE_HASHPTE)) {
 		/* There MIGHT be an HPTE for this pte */
-		unsigned long hash, slot;
+		unsigned long gslot;
 
-		hash = hpt_hash(vpn, shift, ssize);
-		if (old_pte & H_PAGE_F_SECOND)
-			hash = ~hash;
-		slot = (hash & htab_hash_mask) * HPTES_PER_GROUP;
-		slot += (old_pte & H_PAGE_F_GIX) >> H_PAGE_F_GIX_SHIFT;
-
-		if (mmu_hash_ops.hpte_updatepp(slot, rflags, vpn, mmu_psize,
+		gslot = get_hidx_gslot(vpn, shift, ssize, rpte, 0);
+		if (mmu_hash_ops.hpte_updatepp(gslot, rflags, vpn, mmu_psize,
 					       mmu_psize, ssize, flags) == -1)
 			old_pte &= ~_PAGE_HPTEFLAGS;
 	}
@@ -106,8 +103,7 @@ int __hash_page_huge(unsigned long ea, unsigned long access, unsigned long vsid,
 			return -1;
 		}
 
-		new_pte |= (slot << H_PAGE_F_GIX_SHIFT) &
-			(H_PAGE_F_SECOND | H_PAGE_F_GIX);
+		new_pte |= set_hidx_slot(ptep, rpte, 0, slot);
 	}
 
 	/*
-- 
1.8.3.1

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>

WARNING: multiple messages have this Message-ID (diff)
From: Ram Pai <linuxram@us.ibm.com>
To: linuxppc-dev@lists.ozlabs.org, linux-kernel@vger.kernel.org,
	linux-arch@vger.kernel.org, linux-mm@kvack.org, x86@kernel.org,
	linux-doc@vger.kernel.org, linux-kselftest@vger.kernel.org
Cc: benh@kernel.crashing.org, paulus@samba.org, mpe@ellerman.id.au,
	khandual@linux.vnet.ibm.com, aneesh.kumar@linux.vnet.ibm.com,
	bsingharora@gmail.com, dave.hansen@intel.com, hbabu@us.ibm.com,
	linuxram@us.ibm.com, arnd@arndb.de, akpm@linux-foundation.org,
	corbet@lwn.net, mingo@redhat.com
Subject: [RFC v3 04/23] powerpc: Free up four 64K PTE bits in 64K backed HPTE pages
Date: Wed, 21 Jun 2017 18:39:20 -0700	[thread overview]
Message-ID: <1498095579-6790-5-git-send-email-linuxram@us.ibm.com> (raw)
Message-ID: <20170622013920.IQjou-ZZMjOQRxoNib5teq7rqHoZV837NPHCyr7r_k0@z> (raw)
In-Reply-To: <1498095579-6790-1-git-send-email-linuxram@us.ibm.com>

Rearrange 64K PTE bits to  free  up  bits 3, 4, 5  and  6
in the 64K backed HPTE pages. This along with the earlier
patch will entirely free up the four bits from 64K PTE.
The bit numbers are big-endian as defined in the ISA3.0

This patch does the following change to 64K PTE that is
backed by 64K HPTE.

H_PAGE_F_SECOND which occupied bit 4 moves to the second part
        of the pte.
H_PAGE_F_GIX which  occupied bit 5, 6 and 7 also moves to the
        second part of the pte.

since bit 7 is now freed up, we move H_PAGE_BUSY from bit 9
to bit 7. Trying to minimize gaps so that contiguous bits
can be allocated if needed in the future.

The second part of the PTE will hold
(H_PAGE_F_SECOND|H_PAGE_F_GIX) at bit 60,61,62,63.

The above PTE changes is applicable to hugetlbpages aswell.

Signed-off-by: Ram Pai <linuxram@us.ibm.com>
---
 arch/powerpc/include/asm/book3s/64/hash-64k.h | 28 +++++++++------------------
 arch/powerpc/mm/hash64_64k.c                  | 17 ++++++++--------
 arch/powerpc/mm/hugetlbpage-hash64.c          | 16 ++++++---------
 3 files changed, 23 insertions(+), 38 deletions(-)

diff --git a/arch/powerpc/include/asm/book3s/64/hash-64k.h b/arch/powerpc/include/asm/book3s/64/hash-64k.h
index 4bac70a..7b5dbf3 100644
--- a/arch/powerpc/include/asm/book3s/64/hash-64k.h
+++ b/arch/powerpc/include/asm/book3s/64/hash-64k.h
@@ -12,11 +12,8 @@
  */
 #define H_PAGE_COMBO   _RPAGE_RPN0 /* this is a combo 4k page */
 #define H_PAGE_4K_PFN  _RPAGE_RPN1 /* PFN is for a single 4k page */
-#define H_PAGE_F_SECOND	_RPAGE_RSV2	/* HPTE is in 2ndary HPTEG */
-#define H_PAGE_F_GIX	(_RPAGE_RSV3 | _RPAGE_RSV4 | _RPAGE_RPN44)
-#define H_PAGE_F_GIX_SHIFT	56
 
-#define H_PAGE_BUSY	_RPAGE_RPN42     /* software: PTE & hash are busy */
+#define H_PAGE_BUSY	_RPAGE_RPN44     /* software: PTE & hash are busy */
 #define H_PAGE_HASHPTE	_RPAGE_RPN43    /* PTE has associated HPTE */
 
 /*
@@ -26,8 +23,7 @@
 #define H_PAGE_THP_HUGE  H_PAGE_4K_PFN
 
 /* PTE flags to conserve for HPTE identification */
-#define _PAGE_HPTEFLAGS (H_PAGE_BUSY | H_PAGE_F_SECOND | \
-			 H_PAGE_F_GIX | H_PAGE_HASHPTE | H_PAGE_COMBO)
+#define _PAGE_HPTEFLAGS (H_PAGE_BUSY | H_PAGE_HASHPTE | H_PAGE_COMBO)
 /*
  * we support 16 fragments per PTE page of 64K size.
  */
@@ -55,24 +51,18 @@ static inline real_pte_t __real_pte(pte_t pte, pte_t *ptep)
 	unsigned long *hidxp;
 
 	rpte.pte = pte;
-	rpte.hidx = 0;
-	if (pte_val(pte) & H_PAGE_COMBO) {
-		/*
-		 * Make sure we order the hidx load against the H_PAGE_COMBO
-		 * check. The store side ordering is done in __hash_page_4K
-		 */
-		smp_rmb();
-		hidxp = (unsigned long *)(ptep + PTRS_PER_PTE);
-		rpte.hidx = *hidxp;
-	}
+	/*
+	 * The store side ordering is done in set_hidx_slot()
+	 */
+	smp_rmb();
+	hidxp = (unsigned long *)(ptep + PTRS_PER_PTE);
+	rpte.hidx = *hidxp;
 	return rpte;
 }
 
 static inline unsigned long __rpte_to_hidx(real_pte_t rpte, unsigned long index)
 {
-	if ((pte_val(rpte.pte) & H_PAGE_COMBO))
-		return (rpte.hidx >> (index<<2)) & 0xf;
-	return (pte_val(rpte.pte) >> H_PAGE_F_GIX_SHIFT) & 0xf;
+	return ((rpte.hidx >> (index<<2)) & 0xfUL);
 }
 
 static inline unsigned long set_hidx_slot(pte_t *ptep, real_pte_t rpte,
diff --git a/arch/powerpc/mm/hash64_64k.c b/arch/powerpc/mm/hash64_64k.c
index a16cd28..5cbdaa9 100644
--- a/arch/powerpc/mm/hash64_64k.c
+++ b/arch/powerpc/mm/hash64_64k.c
@@ -231,6 +231,7 @@ int __hash_page_64K(unsigned long ea, unsigned long access,
 		    unsigned long vsid, pte_t *ptep, unsigned long trap,
 		    unsigned long flags, int ssize)
 {
+	real_pte_t rpte;
 	unsigned long hpte_group;
 	unsigned long rflags, pa;
 	unsigned long old_pte, new_pte;
@@ -267,6 +268,7 @@ int __hash_page_64K(unsigned long ea, unsigned long access,
 	} while (!pte_xchg(ptep, __pte(old_pte), __pte(new_pte)));
 
 	rflags = htab_convert_pte_flags(new_pte);
+	rpte = __real_pte(__pte(old_pte), ptep);
 
 	if (cpu_has_feature(CPU_FTR_NOEXECUTE) &&
 	    !cpu_has_feature(CPU_FTR_COHERENT_ICACHE))
@@ -274,16 +276,13 @@ int __hash_page_64K(unsigned long ea, unsigned long access,
 
 	vpn  = hpt_vpn(ea, vsid, ssize);
 	if (unlikely(old_pte & H_PAGE_HASHPTE)) {
+		unsigned long gslot;
+
 		/*
 		 * There MIGHT be an HPTE for this pte
 		 */
-		hash = hpt_hash(vpn, shift, ssize);
-		if (old_pte & H_PAGE_F_SECOND)
-			hash = ~hash;
-		slot = (hash & htab_hash_mask) * HPTES_PER_GROUP;
-		slot += (old_pte & H_PAGE_F_GIX) >> H_PAGE_F_GIX_SHIFT;
-
-		if (mmu_hash_ops.hpte_updatepp(slot, rflags, vpn, MMU_PAGE_64K,
+		gslot = get_hidx_gslot(vpn, shift, ssize, rpte, 0);
+		if (mmu_hash_ops.hpte_updatepp(gslot, rflags, vpn, MMU_PAGE_64K,
 					       MMU_PAGE_64K, ssize,
 					       flags) == -1)
 			old_pte &= ~_PAGE_HPTEFLAGS;
@@ -332,9 +331,9 @@ int __hash_page_64K(unsigned long ea, unsigned long access,
 					   MMU_PAGE_64K, MMU_PAGE_64K, old_pte);
 			return -1;
 		}
+
 		new_pte = (new_pte & ~_PAGE_HPTEFLAGS) | H_PAGE_HASHPTE;
-		new_pte |= (slot << H_PAGE_F_GIX_SHIFT) &
-			(H_PAGE_F_SECOND | H_PAGE_F_GIX);
+		new_pte |= set_hidx_slot(ptep, rpte, 0, slot);
 	}
 	*ptep = __pte(new_pte & ~H_PAGE_BUSY);
 	return 0;
diff --git a/arch/powerpc/mm/hugetlbpage-hash64.c b/arch/powerpc/mm/hugetlbpage-hash64.c
index a84bb44..239ca86 100644
--- a/arch/powerpc/mm/hugetlbpage-hash64.c
+++ b/arch/powerpc/mm/hugetlbpage-hash64.c
@@ -22,6 +22,7 @@ int __hash_page_huge(unsigned long ea, unsigned long access, unsigned long vsid,
 		     pte_t *ptep, unsigned long trap, unsigned long flags,
 		     int ssize, unsigned int shift, unsigned int mmu_psize)
 {
+	real_pte_t rpte;
 	unsigned long vpn;
 	unsigned long old_pte, new_pte;
 	unsigned long rflags, pa, sz;
@@ -61,6 +62,7 @@ int __hash_page_huge(unsigned long ea, unsigned long access, unsigned long vsid,
 	} while(!pte_xchg(ptep, __pte(old_pte), __pte(new_pte)));
 
 	rflags = htab_convert_pte_flags(new_pte);
+	rpte = __real_pte(__pte(old_pte), ptep);
 
 	sz = ((1UL) << shift);
 	if (!cpu_has_feature(CPU_FTR_COHERENT_ICACHE))
@@ -71,15 +73,10 @@ int __hash_page_huge(unsigned long ea, unsigned long access, unsigned long vsid,
 	/* Check if pte already has an hpte (case 2) */
 	if (unlikely(old_pte & H_PAGE_HASHPTE)) {
 		/* There MIGHT be an HPTE for this pte */
-		unsigned long hash, slot;
+		unsigned long gslot;
 
-		hash = hpt_hash(vpn, shift, ssize);
-		if (old_pte & H_PAGE_F_SECOND)
-			hash = ~hash;
-		slot = (hash & htab_hash_mask) * HPTES_PER_GROUP;
-		slot += (old_pte & H_PAGE_F_GIX) >> H_PAGE_F_GIX_SHIFT;
-
-		if (mmu_hash_ops.hpte_updatepp(slot, rflags, vpn, mmu_psize,
+		gslot = get_hidx_gslot(vpn, shift, ssize, rpte, 0);
+		if (mmu_hash_ops.hpte_updatepp(gslot, rflags, vpn, mmu_psize,
 					       mmu_psize, ssize, flags) == -1)
 			old_pte &= ~_PAGE_HPTEFLAGS;
 	}
@@ -106,8 +103,7 @@ int __hash_page_huge(unsigned long ea, unsigned long access, unsigned long vsid,
 			return -1;
 		}
 
-		new_pte |= (slot << H_PAGE_F_GIX_SHIFT) &
-			(H_PAGE_F_SECOND | H_PAGE_F_GIX);
+		new_pte |= set_hidx_slot(ptep, rpte, 0, slot);
 	}
 
 	/*
-- 
1.8.3.1

  parent reply	other threads:[~2017-06-22  1:39 UTC|newest]

Thread overview: 60+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-06-22  1:39 [RFC v3 00/23] powerpc: Memory Protection Keys Ram Pai
2017-06-22  1:39 ` Ram Pai
2017-06-22  1:39 ` [RFC v3 01/23] powerpc: Free up four 64K PTE bits in 4K backed HPTE pages Ram Pai
2017-06-22  1:39   ` Ram Pai
2017-06-22  9:21   ` Balbir Singh
2017-06-22  9:21     ` Balbir Singh
2017-06-22 18:50     ` Ram Pai
2017-06-22 18:50       ` Ram Pai
2017-06-22  1:39 ` [RFC v3 02/23] powerpc: introduce set_hidx_slot helper Ram Pai
2017-06-22  1:39   ` Ram Pai
2017-06-25 23:03   ` Balbir Singh
2017-06-25 23:03     ` Balbir Singh
2017-06-26  4:02     ` Benjamin Herrenschmidt
2017-06-26  4:02       ` Benjamin Herrenschmidt
2017-06-27  0:17       ` Ram Pai
2017-06-27  0:17         ` Ram Pai
2017-06-27  0:16     ` Ram Pai
2017-06-27  0:16       ` Ram Pai
2017-06-22  1:39 ` [RFC v3 03/23] powerpc: introduce get_hidx_gslot helper Ram Pai
2017-06-22  1:39   ` Ram Pai
2017-06-22  1:39 ` Ram Pai [this message]
2017-06-22  1:39   ` [RFC v3 04/23] powerpc: Free up four 64K PTE bits in 64K backed HPTE pages Ram Pai
2017-06-22  1:39 ` [RFC v3 05/23] powerpc: capture the PTE format changes in the dump pte report Ram Pai
2017-06-22  1:39   ` Ram Pai
2017-06-22  1:39 ` [RFC v3 06/23] powerpc: use helper functions in __hash_page_4K() for 64K PTE Ram Pai
2017-06-22  1:39   ` Ram Pai
2017-06-22  1:39 ` [RFC v3 07/23] powerpc: use helper functions in __hash_page_4K() for 4K PTE Ram Pai
2017-06-22  1:39   ` Ram Pai
2017-06-22  1:39 ` [RFC v3 08/23] powerpc: use helper functions in flush_hash_page() Ram Pai
2017-06-22  1:39   ` Ram Pai
2017-06-22  1:39 ` [RFC v3 09/23] mm: introduce an additional vma bit for powerpc pkey Ram Pai
2017-06-22  1:39   ` Ram Pai
2017-06-22  1:39 ` [RFC v3 10/23] mm: provide the ability to disable execute on a key at creation Ram Pai
2017-06-22  1:39   ` Ram Pai
2017-06-22  1:39 ` [RFC v3 11/23] x86: key creation with PKEY_DISABLE_EXECUTE is disallowed Ram Pai
2017-06-22  1:39   ` Ram Pai
2017-06-22  1:39 ` [RFC v3 12/23] powerpc: Implement sys_pkey_alloc and sys_pkey_free system call Ram Pai
2017-06-22  1:39   ` Ram Pai
2017-06-22  1:39 ` [RFC v3 13/23] powerpc: store and restore the pkey state across context switches Ram Pai
2017-06-22  1:39   ` Ram Pai
2017-06-22  1:39 ` [RFC v3 14/23] powerpc: Implementation for sys_mprotect_pkey() system call Ram Pai
2017-06-22  1:39   ` Ram Pai
2017-06-22  1:39 ` [RFC v3 15/23] powerpc: Program HPTE key protection bits Ram Pai
2017-06-22  1:39   ` Ram Pai
2017-06-22  1:39 ` [RFC v3 16/23] powerpc: Macro the mask used for checking DSI exception Ram Pai
2017-06-22  1:39   ` Ram Pai
2017-06-22  1:39 ` [RFC v3 17/23] powerpc: Handle exceptions caused by violation of pkey protection Ram Pai
2017-06-22  1:39   ` Ram Pai
2017-06-22  1:39 ` [RFC v3 18/23] powerpc: Deliver SEGV signal on pkey violation Ram Pai
2017-06-22  1:39   ` Ram Pai
2017-06-22  1:39 ` [RFC v3 19/23] selftest: Move protecton key selftest to arch neutral directory Ram Pai
2017-06-22  1:39   ` Ram Pai
2017-06-22  1:39 ` [RFC v3 20/23] selftest: PowerPC specific test updates to memory protection keys Ram Pai
2017-06-22  1:39   ` Ram Pai
2017-06-22  1:39 ` [RFC v3 21/23] Documentation: Move protecton key documentation to arch neutral directory Ram Pai
2017-06-22  1:39   ` Ram Pai
2017-06-22  1:39 ` [RFC v3 22/23] Documentation: PowerPC specific updates to memory protection keys Ram Pai
2017-06-22  1:39   ` Ram Pai
2017-06-22  1:39 ` [RFC v3 23/23] procfs: display the protection-key number associated with a vma Ram Pai
2017-06-22  1:39   ` Ram Pai

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1498095579-6790-5-git-send-email-linuxram@us.ibm.com \
    --to=linuxram@us.ibm.com \
    --cc=akpm@linux-foundation.org \
    --cc=aneesh.kumar@linux.vnet.ibm.com \
    --cc=arnd@arndb.de \
    --cc=benh@kernel.crashing.org \
    --cc=bsingharora@gmail.com \
    --cc=corbet@lwn.net \
    --cc=dave.hansen@intel.com \
    --cc=hbabu@us.ibm.com \
    --cc=khandual@linux.vnet.ibm.com \
    --cc=linux-arch@vger.kernel.org \
    --cc=linux-doc@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-kselftest@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=mingo@redhat.com \
    --cc=mpe@ellerman.id.au \
    --cc=paulus@samba.org \
    --cc=x86@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.