From: Lyude Paul <lyude@redhat.com>
To: Paul Kocialkowski <paul.kocialkowski@linux.intel.com>,
intel-gfx@lists.freedesktop.org
Subject: Re: [PATCH i-g-t v2 5/7] tests/chamelium: Update connector state without reprobe when possible
Date: Tue, 27 Jun 2017 17:26:19 -0400 [thread overview]
Message-ID: <1498598779.14811.5.camel@redhat.com> (raw)
In-Reply-To: <20170627105311.28975-5-paul.kocialkowski@linux.intel.com>
I -think- this one might be okay but I just got reminded of a rather
not-obvious part of the DRM spec for hotplugging, and I need to check
that this doesn't actually break that. will get back to you in a bit
with an actual review :)
On Tue, 2017-06-27 at 13:53 +0300, Paul Kocialkowski wrote:
> This renames the reprobe_connector function to update_connector and
> ensures that full reprobe of the connector is only done when really
> necessary (e.g. when changing the EDID).
>
> A full reprobe takes time and is not required for updating the
> connector
> state. Thus, this allows executing tests faster.
>
> Signed-off-by: Paul Kocialkowski <paul.kocialkowski@linux.intel.com>
> ---
> tests/chamelium.c | 34 ++++++++++++++++++----------------
> 1 file changed, 18 insertions(+), 16 deletions(-)
>
> diff --git a/tests/chamelium.c b/tests/chamelium.c
> index b412c6a7..346018a5 100644
> --- a/tests/chamelium.c
> +++ b/tests/chamelium.c
> @@ -103,13 +103,14 @@ require_connector_present(data_t *data,
> unsigned int type)
> }
>
> static drmModeConnection
> -reprobe_connector(data_t *data, struct chamelium_port *port)
> +update_connector(data_t *data, struct chamelium_port *port, bool
> reprobe)
> {
> drmModeConnector *connector;
> drmModeConnection status;
>
> - igt_debug("Reprobing %s...\n",
> chamelium_port_get_name(port));
> - connector = chamelium_port_get_connector(data->chamelium,
> port, true);
> + igt_debug("Updating %s...\n",
> chamelium_port_get_name(port));
> + connector = chamelium_port_get_connector(data->chamelium,
> port,
> + reprobe);
> igt_assert(connector);
> status = connector->connection;
>
> @@ -119,7 +120,7 @@ reprobe_connector(data_t *data, struct
> chamelium_port *port)
>
> static void
> wait_for_connector(data_t *data, struct chamelium_port *port,
> - drmModeConnection status)
> + drmModeConnection status, bool reprobe)
> {
> bool finished = false;
>
> @@ -132,7 +133,7 @@ wait_for_connector(data_t *data, struct
> chamelium_port *port,
> * that hpd events work in the event that hpd doesn't work
> on the system
> */
> igt_until_timeout(HOTPLUG_TIMEOUT) {
> - if (reprobe_connector(data, port) == status) {
> + if (update_connector(data, port, reprobe) == status)
> {
> finished = true;
> return;
> }
> @@ -151,11 +152,12 @@ reset_state(data_t *data, struct chamelium_port
> *port)
> chamelium_reset(data->chamelium);
>
> if (port) {
> - wait_for_connector(data, port,
> DRM_MODE_DISCONNECTED);
> + wait_for_connector(data, port,
> DRM_MODE_DISCONNECTED, false);
> } else {
> for (p = 0; p < data->port_count; p++) {
> port = data->ports[p];
> - wait_for_connector(data, port,
> DRM_MODE_DISCONNECTED);
> + wait_for_connector(data, port,
> DRM_MODE_DISCONNECTED,
> + false);
> }
> }
> }
> @@ -175,7 +177,7 @@ test_basic_hotplug(data_t *data, struct
> chamelium_port *port, int toggle_count)
> /* Check if we get a sysfs hotplug event */
> chamelium_plug(data->chamelium, port);
> igt_assert(igt_hotplug_detected(mon,
> HOTPLUG_TIMEOUT));
> - igt_assert_eq(reprobe_connector(data, port),
> + igt_assert_eq(update_connector(data, port, false),
> DRM_MODE_CONNECTED);
>
> igt_flush_hotplugs(mon);
> @@ -183,7 +185,7 @@ test_basic_hotplug(data_t *data, struct
> chamelium_port *port, int toggle_count)
> /* Now check if we get a hotplug from disconnection
> */
> chamelium_unplug(data->chamelium, port);
> igt_assert(igt_hotplug_detected(mon,
> HOTPLUG_TIMEOUT));
> - igt_assert_eq(reprobe_connector(data, port),
> + igt_assert_eq(update_connector(data, port, false),
> DRM_MODE_DISCONNECTED);
> }
>
> @@ -204,7 +206,7 @@ test_edid_read(data_t *data, struct
> chamelium_port *port,
>
> chamelium_port_set_edid(data->chamelium, port, edid_id);
> chamelium_plug(data->chamelium, port);
> - wait_for_connector(data, port, DRM_MODE_CONNECTED);
> + wait_for_connector(data, port, DRM_MODE_CONNECTED, true);
>
> igt_assert(kmstest_get_property(data->drm_fd, connector-
> >connector_id,
> DRM_MODE_OBJECT_CONNECTOR,
> "EDID", NULL,
> @@ -247,13 +249,13 @@ try_suspend_resume_hpd(data_t *data, struct
> chamelium_port *port,
>
> igt_assert(igt_hotplug_detected(mon, HOTPLUG_TIMEOUT));
> if (port) {
> - igt_assert_eq(reprobe_connector(data, port),
> connected ?
> + igt_assert_eq(update_connector(data, port, false),
> connected ?
> DRM_MODE_DISCONNECTED :
> DRM_MODE_CONNECTED);
> } else {
> for (p = 0; p < data->port_count; p++) {
> port = data->ports[p];
> - igt_assert_eq(reprobe_connector(data, port),
> connected ?
> - DRM_MODE_DISCONNECTED :
> + igt_assert_eq(update_connector(data, port,
> false),
> + connected ?
> DRM_MODE_DISCONNECTED :
> DRM_MODE_CONNECTED);
> }
>
> @@ -317,7 +319,7 @@ test_suspend_resume_edid_change(data_t *data,
> struct chamelium_port *port,
> /* First plug in the port */
> chamelium_port_set_edid(data->chamelium, port, edid_id);
> chamelium_plug(data->chamelium, port);
> - wait_for_connector(data, port, DRM_MODE_CONNECTED);
> + wait_for_connector(data, port, DRM_MODE_CONNECTED, true);
>
> igt_flush_hotplugs(mon);
>
> @@ -352,7 +354,7 @@ prepare_output(data_t *data,
> chamelium_port_set_edid(data->chamelium, port, data-
> >edid_id);
>
> chamelium_plug(data->chamelium, port);
> - wait_for_connector(data, port, DRM_MODE_CONNECTED);
> + wait_for_connector(data, port, DRM_MODE_CONNECTED, true);
>
> igt_display_init(display, data->drm_fd);
> output = igt_output_from_connector(display, connector);
> @@ -590,7 +592,7 @@ test_hpd_without_ddc(data_t *data, struct
> chamelium_port *port)
> chamelium_plug(data->chamelium, port);
>
> igt_assert(igt_hotplug_detected(mon, HOTPLUG_TIMEOUT));
> - igt_assert_eq(reprobe_connector(data, port),
> DRM_MODE_CONNECTED);
> + igt_assert_eq(update_connector(data, port, false),
> DRM_MODE_CONNECTED);
>
> igt_cleanup_hotplug(mon);
> }
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2017-06-27 21:26 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-06-27 10:53 [PATCH i-g-t v2 1/7] lib/igt_aux: Use provided autoresume delay for rtc wake Paul Kocialkowski
2017-06-27 10:53 ` [PATCH i-g-t v2 2/7] chamelium: Add support for HPD toggle scheduling instead of async pulses Paul Kocialkowski
2017-06-27 10:53 ` [PATCH i-g-t v2 3/7] tests/chamelium: Add VGA HPD toggle tests after suspend and hibernate Paul Kocialkowski
2017-06-27 10:53 ` [PATCH i-g-t v2 4/7] tests/chamelium: Reduce the simple hotplug test toggle count for VGA Paul Kocialkowski
2017-06-27 10:53 ` [PATCH i-g-t v2 5/7] tests/chamelium: Update connector state without reprobe when possible Paul Kocialkowski
2017-06-27 21:26 ` Lyude Paul [this message]
2017-06-28 7:47 ` Paul Kocialkowski
2017-06-27 10:53 ` [PATCH i-g-t v2 6/7] tests/chamelium: Disconnect connectors without extra reset Paul Kocialkowski
2017-06-27 21:21 ` Lyude Paul
2017-06-28 7:49 ` Paul Kocialkowski
2017-06-27 10:53 ` [PATCH i-g-t v2 7/7] Make igtrc configuration common, with configurable suspend/resume delay Paul Kocialkowski
2017-06-27 21:11 ` Lyude Paul
2017-06-28 7:27 ` Paul Kocialkowski
2017-06-27 21:25 ` [PATCH i-g-t v2 1/7] lib/igt_aux: Use provided autoresume delay for rtc wake Lyude Paul
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1498598779.14811.5.camel@redhat.com \
--to=lyude@redhat.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=paul.kocialkowski@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.