All of lore.kernel.org
 help / color / mirror / Atom feed
From: Paul Kocialkowski <paul.kocialkowski@linux.intel.com>
To: Lyude Paul <lyude@redhat.com>, intel-gfx@lists.freedesktop.org
Subject: Re: [PATCH i-g-t v2 6/7] tests/chamelium: Disconnect connectors without extra reset
Date: Wed, 28 Jun 2017 10:49:33 +0300	[thread overview]
Message-ID: <1498636173.1392.5.camel@linux.intel.com> (raw)
In-Reply-To: <1498598512.14811.2.camel@redhat.com>

On Tue, 2017-06-27 at 17:21 -0400, Lyude Paul wrote:
> NAK, I'd rather just go with the idea you had with removing the
> connector reset in chamelium_init()

Okay then, I'll craft v3 in that directon. This is not a big overhead anyways,
and it does not change anything when running subtests separately (which is what
most test infrastructures using igt seem to be doing).

> On Tue, 2017-06-27 at 13:53 +0300, Paul Kocialkowski wrote:
> > This removes the reset call from the reset_state function and renames
> > it
> > to disconnect_connector. Since a call to reset is already done in
> > chamelium_init, there is no need to do an extra reset in each test.
> > 
> > This allows reducing the execution time a bit.
> > 
> > Signed-off-by: Paul Kocialkowski <paul.kocialkowski@linux.intel.com>
> > ---
> >  tests/chamelium.c | 22 +++++++++++-----------
> >  1 file changed, 11 insertions(+), 11 deletions(-)
> > 
> > diff --git a/tests/chamelium.c b/tests/chamelium.c
> > index 346018a5..41e0e89b 100644
> > --- a/tests/chamelium.c
> > +++ b/tests/chamelium.c
> > @@ -145,17 +145,17 @@ wait_for_connector(data_t *data, struct
> > chamelium_port *port,
> >  }
> >  
> >  static void
> > -reset_state(data_t *data, struct chamelium_port *port)
> > +disconnect_connector(data_t *data, struct chamelium_port *port)
> >  {
> >  	int p;
> >  
> > -	chamelium_reset(data->chamelium);
> > -
> >  	if (port) {
> > +		chamelium_unplug(data->chamelium, port);
> >  		wait_for_connector(data, port,
> > DRM_MODE_DISCONNECTED, false);
> >  	} else {
> >  		for (p = 0; p < data->port_count; p++) {
> >  			port = data->ports[p];
> > +			chamelium_unplug(data->chamelium, port);
> >  			wait_for_connector(data, port,
> > DRM_MODE_DISCONNECTED,
> >  					   false);
> >  		}
> > @@ -168,7 +168,7 @@ test_basic_hotplug(data_t *data, struct
> > chamelium_port *port, int toggle_count)
> >  	struct udev_monitor *mon = igt_watch_hotplug();
> >  	int i;
> >  
> > -	reset_state(data, NULL);
> > +	disconnect_connector(data, NULL);
> >  	igt_hpd_storm_set_threshold(data->drm_fd, 0);
> >  
> >  	for (i = 0; i < toggle_count; i++) {
> > @@ -202,7 +202,7 @@ test_edid_read(data_t *data, struct
> > chamelium_port *port,
> >  	    data->chamelium, port, false);
> >  	uint64_t edid_blob_id;
> >  
> > -	reset_state(data, port);
> > +	disconnect_connector(data, port);
> >  
> >  	chamelium_port_set_edid(data->chamelium, port, edid_id);
> >  	chamelium_plug(data->chamelium, port);
> > @@ -270,7 +270,7 @@ test_suspend_resume_hpd(data_t *data, struct
> > chamelium_port *port,
> >  {
> >  	struct udev_monitor *mon = igt_watch_hotplug();
> >  
> > -	reset_state(data, port);
> > +	disconnect_connector(data, port);
> >  
> >  	/* Make sure we notice new connectors after resuming */
> >  	try_suspend_resume_hpd(data, port, state, test, mon, false);
> > @@ -294,7 +294,7 @@ test_suspend_resume_hpd_common(data_t *data, enum
> > igt_suspend_state state,
> >  		igt_debug("Testing port %s\n",
> > chamelium_port_get_name(port));
> >  	}
> >  
> > -	reset_state(data, NULL);
> > +	disconnect_connector(data, NULL);
> >  
> >  	/* Make sure we notice new connectors after resuming */
> >  	try_suspend_resume_hpd(data, NULL, state, test, mon, false);
> > @@ -314,7 +314,7 @@ test_suspend_resume_edid_change(data_t *data,
> > struct chamelium_port *port,
> >  {
> >  	struct udev_monitor *mon = igt_watch_hotplug();
> >  
> > -	reset_state(data, port);
> > +	disconnect_connector(data, port);
> >  
> >  	/* First plug in the port */
> >  	chamelium_port_set_edid(data->chamelium, port, edid_id);
> > @@ -582,7 +582,7 @@ test_hpd_without_ddc(data_t *data, struct
> > chamelium_port *port)
> >  {
> >  	struct udev_monitor *mon = igt_watch_hotplug();
> >  
> > -	reset_state(data, port);
> > +	disconnect_connector(data, port);
> >  	igt_flush_hotplugs(mon);
> >  
> >  	/* Disable the DDC on the connector and make sure we still
> > get a
> > @@ -604,7 +604,7 @@ test_hpd_storm_detect(data_t *data, struct
> > chamelium_port *port, int width)
> >  	int count = 0;
> >  
> >  	igt_require_hpd_storm_ctl(data->drm_fd);
> > -	reset_state(data, port);
> > +	disconnect_connector(data, port);
> >  
> >  	igt_hpd_storm_set_threshold(data->drm_fd, 1);
> >  	chamelium_fire_hpd_pulses(data->chamelium, port, width, 10);
> > @@ -629,7 +629,7 @@ static void
> >  test_hpd_storm_disable(data_t *data, struct chamelium_port *port,
> > int width)
> >  {
> >  	igt_require_hpd_storm_ctl(data->drm_fd);
> > -	reset_state(data, port);
> > +	disconnect_connector(data, port);
> >  
> >  	igt_hpd_storm_set_threshold(data->drm_fd, 0);
> >  	chamelium_fire_hpd_pulses(data->chamelium, port,
-- 
Paul Kocialkowski <paul.kocialkowski@linux.intel.com>
Intel Finland Oy - BIC 0357606-4 - Westendinkatu 7, 02160 Espoo
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

  reply	other threads:[~2017-06-28  7:49 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-06-27 10:53 [PATCH i-g-t v2 1/7] lib/igt_aux: Use provided autoresume delay for rtc wake Paul Kocialkowski
2017-06-27 10:53 ` [PATCH i-g-t v2 2/7] chamelium: Add support for HPD toggle scheduling instead of async pulses Paul Kocialkowski
2017-06-27 10:53 ` [PATCH i-g-t v2 3/7] tests/chamelium: Add VGA HPD toggle tests after suspend and hibernate Paul Kocialkowski
2017-06-27 10:53 ` [PATCH i-g-t v2 4/7] tests/chamelium: Reduce the simple hotplug test toggle count for VGA Paul Kocialkowski
2017-06-27 10:53 ` [PATCH i-g-t v2 5/7] tests/chamelium: Update connector state without reprobe when possible Paul Kocialkowski
2017-06-27 21:26   ` Lyude Paul
2017-06-28  7:47     ` Paul Kocialkowski
2017-06-27 10:53 ` [PATCH i-g-t v2 6/7] tests/chamelium: Disconnect connectors without extra reset Paul Kocialkowski
2017-06-27 21:21   ` Lyude Paul
2017-06-28  7:49     ` Paul Kocialkowski [this message]
2017-06-27 10:53 ` [PATCH i-g-t v2 7/7] Make igtrc configuration common, with configurable suspend/resume delay Paul Kocialkowski
2017-06-27 21:11   ` Lyude Paul
2017-06-28  7:27     ` Paul Kocialkowski
2017-06-27 21:25 ` [PATCH i-g-t v2 1/7] lib/igt_aux: Use provided autoresume delay for rtc wake Lyude Paul

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1498636173.1392.5.camel@linux.intel.com \
    --to=paul.kocialkowski@linux.intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=lyude@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.