[PATCH v4 0/3] hwmon: (pmbus): Add IBM Common Form Factor (CFF) power supply driver

[PATCH v4 0/3] hwmon: (pmbus): Add IBM Common Form Factor (CFF) power supply driver

[Eddie James]

From: "Edward A. James" <eajames@us.ibm.com>

This series adds a hwmon pmbus driver for a POWER System power supply. The
core monitoring functionality is provided by pmbus.

Changes since v3:
 * Change "fault" to "alarm" in the documentation.

Changes since v2:
 * Renamed the driver again...
 * Remove debugfs bool from pmbus_driver_info.
 * Add comment for returning rc when reading STATUS_MFR_SPECIFIC fails.

Since v1:
 * Renamed the driver.
 * Removed non-hwmon attributes.
 * Simplified word and byte data reads.

Edward A. James (3):
  dt-bindings: i2c: Document the IBM CCF power supply version 1
  hwmon: (pmbus): Add IBM Common Form Factor (CFF) power supply driver
  Documentation: hwmon: Document the IBM CFF power supply

 .../devicetree/bindings/i2c/ibm,cffps1.txt         |  21 +++
 Documentation/hwmon/ibm-cffps                      |  54 ++++++++
 drivers/hwmon/pmbus/Kconfig                        |  10 ++
 drivers/hwmon/pmbus/Makefile                       |   1 +
 drivers/hwmon/pmbus/ibm-cffps.c                    | 151 +++++++++++++++++++++
 5 files changed, 237 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/i2c/ibm,cffps1.txt
 create mode 100644 Documentation/hwmon/ibm-cffps
 create mode 100644 drivers/hwmon/pmbus/ibm-cffps.c

-- 
1.8.3.1

[PATCH v4 0/3] hwmon: (pmbus): Add IBM Common Form Factor (CFF) power supply driver

[Eddie James]

From: "Edward A. James" <eajames-r/Jw6+rmf7HQT0dZR+AlfA@public.gmane.org>

This series adds a hwmon pmbus driver for a POWER System power supply. The
core monitoring functionality is provided by pmbus.

Changes since v3:
 * Change "fault" to "alarm" in the documentation.

Changes since v2:
 * Renamed the driver again...
 * Remove debugfs bool from pmbus_driver_info.
 * Add comment for returning rc when reading STATUS_MFR_SPECIFIC fails.

Since v1:
 * Renamed the driver.
 * Removed non-hwmon attributes.
 * Simplified word and byte data reads.

Edward A. James (3):
  dt-bindings: i2c: Document the IBM CCF power supply version 1
  hwmon: (pmbus): Add IBM Common Form Factor (CFF) power supply driver
  Documentation: hwmon: Document the IBM CFF power supply

 .../devicetree/bindings/i2c/ibm,cffps1.txt         |  21 +++
 Documentation/hwmon/ibm-cffps                      |  54 ++++++++
 drivers/hwmon/pmbus/Kconfig                        |  10 ++
 drivers/hwmon/pmbus/Makefile                       |   1 +
 drivers/hwmon/pmbus/ibm-cffps.c                    | 151 +++++++++++++++++++++
 5 files changed, 237 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/i2c/ibm,cffps1.txt
 create mode 100644 Documentation/hwmon/ibm-cffps
 create mode 100644 drivers/hwmon/pmbus/ibm-cffps.c

-- 
1.8.3.1

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v4 1/3] dt-bindings: i2c: Document the IBM CCF power supply version 1

[Eddie James]

From: "Edward A. James" <eajames@us.ibm.com>

Signed-off-by: Edward A. James <eajames@us.ibm.com>
---
 .../devicetree/bindings/i2c/ibm,cffps1.txt          | 21 +++++++++++++++++++++
 1 file changed, 21 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/i2c/ibm,cffps1.txt

diff --git a/Documentation/devicetree/bindings/i2c/ibm,cffps1.txt b/Documentation/devicetree/bindings/i2c/ibm,cffps1.txt
new file mode 100644
index 0000000..f68a0a6
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/ibm,cffps1.txt
@@ -0,0 +1,21 @@
+Device-tree bindings for IBM Common Form Factor Power Supply Version 1
+----------------------------------------------------------------------
+
+Required properties:
+ - compatible = "ibm,cffps1";
+ - reg = < I2C bus address >;		: Address of the power supply on the
+					  I2C bus.
+
+Example:
+
+    i2c-bus@100 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        #interrupt-cells = <1>;
+        < more properties >
+
+        power-supply@68 {
+            compatible = "ibm,cffps1";
+            reg = <0x68>;
+        };
+    };
-- 
1.8.3.1

[PATCH v4 2/3] hwmon: (pmbus): Add IBM Common Form Factor (CFF) power supply driver

[Eddie James]

From: "Edward A. James" <eajames@us.ibm.com>

Add the driver to monitor IBM CFF power supplies with hwmon over
pmbus.

Signed-off-by: Edward A. James <eajames@us.ibm.com>
---
 drivers/hwmon/pmbus/Kconfig     |  10 +++
 drivers/hwmon/pmbus/Makefile    |   1 +
 drivers/hwmon/pmbus/ibm-cffps.c | 151 ++++++++++++++++++++++++++++++++++++++++
 3 files changed, 162 insertions(+)
 create mode 100644 drivers/hwmon/pmbus/ibm-cffps.c

diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig
index 68d717a..f3de18a 100644
--- a/drivers/hwmon/pmbus/Kconfig
+++ b/drivers/hwmon/pmbus/Kconfig
@@ -37,6 +37,16 @@ config SENSORS_ADM1275
 	  This driver can also be built as a module. If so, the module will
 	  be called adm1275.
 
+config SENSORS_IBM_CFFPS
+	tristate "IBM Common Form Factor Power Supply"
+	default n
+	help
+	  If you say yes here you get hardware monitoring support for the IBM
+	  Common Form Factor power supply.
+
+	  This driver can also be built as a module. If so, the module will
+	  be called ibm-cffps.
+
 config SENSORS_IR35221
 	tristate "Infineon IR35221"
 	default n
diff --git a/drivers/hwmon/pmbus/Makefile b/drivers/hwmon/pmbus/Makefile
index 75bb7ca..737fa4e 100644
--- a/drivers/hwmon/pmbus/Makefile
+++ b/drivers/hwmon/pmbus/Makefile
@@ -5,6 +5,7 @@
 obj-$(CONFIG_PMBUS)		+= pmbus_core.o
 obj-$(CONFIG_SENSORS_PMBUS)	+= pmbus.o
 obj-$(CONFIG_SENSORS_ADM1275)	+= adm1275.o
+obj-$(CONFIG_SENSORS_IBM_CFFPS)	+= ibm-cffps.o
 obj-$(CONFIG_SENSORS_IR35221)	+= ir35221.o
 obj-$(CONFIG_SENSORS_LM25066)	+= lm25066.o
 obj-$(CONFIG_SENSORS_LTC2978)	+= ltc2978.o
diff --git a/drivers/hwmon/pmbus/ibm-cffps.c b/drivers/hwmon/pmbus/ibm-cffps.c
new file mode 100644
index 0000000..1a6294c
--- /dev/null
+++ b/drivers/hwmon/pmbus/ibm-cffps.c
@@ -0,0 +1,151 @@
+/*
+ * Copyright 2017 IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/device.h>
+#include <linux/i2c.h>
+#include <linux/jiffies.h>
+#include <linux/module.h>
+
+#include "pmbus.h"
+
+/* STATUS_MFR_SPECIFIC bits */
+#define CFFPS_MFR_FAN_FAULT			BIT(0)
+#define CFFPS_MFR_THERMAL_FAULT			BIT(1)
+#define CFFPS_MFR_OV_FAULT			BIT(2)
+#define CFFPS_MFR_UV_FAULT			BIT(3)
+#define CFFPS_MFR_PS_KILL			BIT(4)
+#define CFFPS_MFR_OC_FAULT			BIT(5)
+#define CFFPS_MFR_VAUX_FAULT			BIT(6)
+#define CFFPS_MFR_CURRENT_SHARE_WARNING		BIT(7)
+
+static int ibm_cffps_read_byte_data(struct i2c_client *client, int page,
+				    int reg)
+{
+	int rc, mfr;
+
+	switch (reg) {
+	case PMBUS_STATUS_VOUT:
+	case PMBUS_STATUS_IOUT:
+	case PMBUS_STATUS_TEMPERATURE:
+	case PMBUS_STATUS_FAN_12:
+		rc = pmbus_read_byte_data(client, page, reg);
+		if (rc < 0)
+			return rc;
+
+		mfr = pmbus_read_byte_data(client, page,
+					   PMBUS_STATUS_MFR_SPECIFIC);
+		if (mfr < 0)
+			/*
+			 * Return the status register instead of an error,
+			 * since we successfully read status.
+			 */
+			return rc;
+
+		/* Add MFR_SPECIFIC bits to the standard pmbus status regs. */
+		if (reg == PMBUS_STATUS_FAN_12) {
+			if (mfr & CFFPS_MFR_FAN_FAULT)
+				rc |= PB_FAN_FAN1_FAULT;
+		} else if (reg == PMBUS_STATUS_TEMPERATURE) {
+			if (mfr & CFFPS_MFR_THERMAL_FAULT)
+				rc |= PB_TEMP_OT_FAULT;
+		} else if (reg == PMBUS_STATUS_VOUT) {
+			if (mfr & (CFFPS_MFR_OV_FAULT | CFFPS_MFR_VAUX_FAULT))
+				rc |= PB_VOLTAGE_OV_FAULT;
+			if (mfr & CFFPS_MFR_UV_FAULT)
+				rc |= PB_VOLTAGE_UV_FAULT;
+		} else if (reg == PMBUS_STATUS_IOUT) {
+			if (mfr & CFFPS_MFR_OC_FAULT)
+				rc |= PB_IOUT_OC_FAULT;
+			if (mfr & CFFPS_MFR_CURRENT_SHARE_WARNING)
+				rc |= PB_CURRENT_SHARE_FAULT;
+		}
+		break;
+	default:
+		rc = -ENODATA;
+		break;
+	}
+
+	return rc;
+}
+
+static int ibm_cffps_read_word_data(struct i2c_client *client, int page,
+				    int reg)
+{
+	int rc, mfr;
+
+	switch (reg) {
+	case PMBUS_STATUS_WORD:
+		rc = pmbus_read_word_data(client, page, reg);
+		if (rc < 0)
+			return rc;
+
+		mfr = pmbus_read_byte_data(client, page,
+					   PMBUS_STATUS_MFR_SPECIFIC);
+		if (mfr < 0)
+			/*
+			 * Return the status register instead of an error,
+			 * since we successfully read status.
+			 */
+			return rc;
+
+		if (mfr & CFFPS_MFR_PS_KILL)
+			rc |= PB_STATUS_OFF;
+		break;
+	default:
+		rc = -ENODATA;
+		break;
+	}
+
+	return rc;
+}
+
+static struct pmbus_driver_info ibm_cffps_info = {
+	.pages = 1,
+	.func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_VOUT | PMBUS_HAVE_IOUT |
+		PMBUS_HAVE_PIN | PMBUS_HAVE_FAN12 | PMBUS_HAVE_TEMP |
+		PMBUS_HAVE_TEMP2 | PMBUS_HAVE_TEMP3 | PMBUS_HAVE_STATUS_VOUT |
+		PMBUS_HAVE_STATUS_IOUT | PMBUS_HAVE_STATUS_INPUT |
+		PMBUS_HAVE_STATUS_TEMP | PMBUS_HAVE_STATUS_FAN12,
+	.read_byte_data = ibm_cffps_read_byte_data,
+	.read_word_data = ibm_cffps_read_word_data,
+};
+
+static int ibm_cffps_probe(struct i2c_client *client,
+			   const struct i2c_device_id *id)
+{
+	return pmbus_do_probe(client, id, &ibm_cffps_info);
+}
+
+static const struct i2c_device_id ibm_cffps_id[] = {
+	{ "ibm_cffps1", 1 },
+	{}
+};
+MODULE_DEVICE_TABLE(i2c, ibm_cffps_id);
+
+static const struct of_device_id ibm_cffps_of_match[] = {
+	{ .compatible = "ibm,cffps1" },
+	{}
+};
+MODULE_DEVICE_TABLE(of, ibm_cffps_of_match);
+
+static struct i2c_driver ibm_cffps_driver = {
+	.driver = {
+		.name = "ibm-cffps",
+		.of_match_table = ibm_cffps_of_match,
+	},
+	.probe = ibm_cffps_probe,
+	.remove = pmbus_do_remove,
+	.id_table = ibm_cffps_id,
+};
+
+module_i2c_driver(ibm_cffps_driver);
+
+MODULE_AUTHOR("Eddie James");
+MODULE_DESCRIPTION("PMBus driver for IBM Common Form Factor power supplies");
+MODULE_LICENSE("GPL");
-- 
1.8.3.1

[PATCH v4 3/3] Documentation: hwmon: Document the IBM CFF power supply

[Eddie James]

From: "Edward A. James" <eajames@us.ibm.com>

Signed-off-by: Edward A. James <eajames@us.ibm.com>
---
 Documentation/hwmon/ibm-cffps | 54 +++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 54 insertions(+)
 create mode 100644 Documentation/hwmon/ibm-cffps

diff --git a/Documentation/hwmon/ibm-cffps b/Documentation/hwmon/ibm-cffps
new file mode 100644
index 0000000..e05ecd8
--- /dev/null
+++ b/Documentation/hwmon/ibm-cffps
@@ -0,0 +1,54 @@
+Kernel driver ibm-cffps
+=======================
+
+Supported chips:
+  * IBM Common Form Factor power supply
+
+Author: Eddie James <eajames@us.ibm.com>
+
+Description
+-----------
+
+This driver supports IBM Common Form Factor (CFF) power supplies. This driver
+is a client to the core PMBus driver.
+
+Usage Notes
+-----------
+
+This driver does not auto-detect devices. You will have to instantiate the
+devices explicitly. Please see Documentation/i2c/instantiating-devices for
+details.
+
+Sysfs entries
+-------------
+
+The following attributes are supported:
+
+curr1_alarm		Output current over-current alarm.
+curr1_input		Measured output current in mA.
+curr1_label		"iout1"
+
+fan1_alarm		Fan 1 warning.
+fan1_fault		Fan 1 fault.
+fan1_input		Fan 1 speed in RPM.
+fan2_alarm		Fan 2 warning.
+fan2_fault		Fan 2 fault.
+fan2_input		Fan 2 speed in RPM.
+
+in1_alarm		Input voltage under-voltage alarm.
+in1_input		Measured input voltage in mV.
+in1_label		"vin"
+in2_alarm		Output voltage over-voltage alarm.
+in2_input		Measured output voltage in mV.
+in2_label		"vout1"
+
+power1_alarm		Input fault or alarm.
+power1_input		Measured input power in uW.
+power1_label		"pin"
+
+temp1_alarm		PSU inlet ambient temperature over-temperature alarm.
+temp1_input		Measured PSU inlet ambient temp in millidegrees C.
+temp2_alarm		Secondary rectifier temp over-temperature alarm.
+temp2_input		Measured secondary rectifier temp in millidegrees C.
+temp3_alarm		ORing FET temperature over-temperature alarm.
+temp3_input		Measured ORing FET temperature in millidegrees C.
-- 
1.8.3.1

Re: [PATCH v4 1/3] dt-bindings: i2c: Document the IBM CCF power supply version 1

[Guenter Roeck]

On 08/15/2017 01:52 PM, Eddie James wrote:
> From: "Edward A. James" <eajames@us.ibm.com>
> 
> Signed-off-by: Edward A. James <eajames@us.ibm.com>
> ---
>   .../devicetree/bindings/i2c/ibm,cffps1.txt          | 21 +++++++++++++++++++++

Sorry, just noticed. Sorry for the piecemeal review :-(.
The i2c directory is used for i2c controllers, not for other i2c devices.
Please move to hwmon (and drop i2c from the subject).

Thanks,
Guenter

>   1 file changed, 21 insertions(+)
>   create mode 100644 Documentation/devicetree/bindings/i2c/ibm,cffps1.txt
> 
> diff --git a/Documentation/devicetree/bindings/i2c/ibm,cffps1.txt b/Documentation/devicetree/bindings/i2c/ibm,cffps1.txt
> new file mode 100644
> index 0000000..f68a0a6
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/i2c/ibm,cffps1.txt
> @@ -0,0 +1,21 @@
> +Device-tree bindings for IBM Common Form Factor Power Supply Version 1
> +----------------------------------------------------------------------
> +
> +Required properties:
> + - compatible = "ibm,cffps1";
> + - reg = < I2C bus address >;		: Address of the power supply on the
> +					  I2C bus.
> +
> +Example:
> +
> +    i2c-bus@100 {
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +        #interrupt-cells = <1>;
> +        < more properties >
> +
> +        power-supply@68 {
> +            compatible = "ibm,cffps1";
> +            reg = <0x68>;
> +        };
> +    };
> 

Re: [PATCH v4 1/3] dt-bindings: i2c: Document the IBM CCF power supply version 1

[Guenter Roeck]

On 08/15/2017 01:52 PM, Eddie James wrote:
> From: "Edward A. James" <eajames-r/Jw6+rmf7HQT0dZR+AlfA@public.gmane.org>
> 
> Signed-off-by: Edward A. James <eajames-r/Jw6+rmf7HQT0dZR+AlfA@public.gmane.org>
> ---
>   .../devicetree/bindings/i2c/ibm,cffps1.txt          | 21 +++++++++++++++++++++

Sorry, just noticed. Sorry for the piecemeal review :-(.
The i2c directory is used for i2c controllers, not for other i2c devices.
Please move to hwmon (and drop i2c from the subject).

Thanks,
Guenter

>   1 file changed, 21 insertions(+)
>   create mode 100644 Documentation/devicetree/bindings/i2c/ibm,cffps1.txt
> 
> diff --git a/Documentation/devicetree/bindings/i2c/ibm,cffps1.txt b/Documentation/devicetree/bindings/i2c/ibm,cffps1.txt
> new file mode 100644
> index 0000000..f68a0a6
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/i2c/ibm,cffps1.txt
> @@ -0,0 +1,21 @@
> +Device-tree bindings for IBM Common Form Factor Power Supply Version 1
> +----------------------------------------------------------------------
> +
> +Required properties:
> + - compatible = "ibm,cffps1";
> + - reg = < I2C bus address >;		: Address of the power supply on the
> +					  I2C bus.
> +
> +Example:
> +
> +    i2c-bus@100 {
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +        #interrupt-cells = <1>;
> +        < more properties >
> +
> +        power-supply@68 {
> +            compatible = "ibm,cffps1";
> +            reg = <0x68>;
> +        };
> +    };
> 

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html