All of lore.kernel.org
 help / color / mirror / Atom feed
From: Paul Eggleton <paul.eggleton@linux.intel.com>
To: Brian Hutchinson <b.hutchman@gmail.com>,
	Denys Dmytriyenko <denys@ti.com>
Cc: yocto@yoctoproject.org
Subject: Re: Should I be worried about this nativesdk-packagegroup-sdk-host warning while building meta-toolchain
Date: Tue, 23 Jul 2013 16:13:18 +0100	[thread overview]
Message-ID: <1503447.VStvRngV5W@helios> (raw)
In-Reply-To: <CAFZh4h9-+XQBWxHh22zQ+jwQBYiaUwifzcdpLPF2kU+kn5Pg9A@mail.gmail.com>

On Tuesday 23 July 2013 10:13:10 Brian Hutchinson wrote:
> I'm using master branch of Yocto and meta-ti (and meta-openembedded).
> 
> I built meta-toolchain for beaglebone machine type and then I went into my
> local.conf and changed sdkmachine to i686 as I need both 64bit & 32bit
> toolchains.  After modifying my local.conf I ran bitbake meta-toolchain
> again and received these warnings:
> 
> hutch@neo:~/yocto_master_beaglebone/poky/build$ bitbake meta-toolchain
> WARNING: Host distribution "Debian-7.1" has not been validated with this
> version of the build system; you may possibly experience unexpected
> failures. It is recommended that you use a tested distribution.
> WARNING: Variable key FILES_${PN}-dev (${includedir} ${FILES_SOLIBSDEV}
> ${libdir}/*.la ${libdir}/*.o ${libdir}/pkgconfig ${datadir}/pkgconfig
> ${datadir}/aclocal ${base_libdir}/*.o ${libdir}/${BPN}/*.la
> ${base_libdir}/*.la) replaces original key FILES_ti-ipc-dev (${libdir}/*).
> 
> 
> 
> 
> WARNING: Variable key FILES_${PN}-dev (${includedir} ${FILES_SOLIBSDEV}
> ${libdir}/*.la ${libdir}/*.o ${libdir}/pkgconfig ${datadir}/pkgconfig
> ${datadir}/aclocal ${base_libdir}/*.o ${libdir}/${BPN}/*.la
> ${base_libdir}/*.la) replaces original key FILES_ti-syslink-dev
> (${libdir}/*).
> 
> 
> 
> Parsing recipes: 100%
> 
> |###########################################################################
> |###########################################################################
> |##################################################################|
> Time: 00:00:28
> Parsing of 1408 .bb files complete (0 cached, 1408 parsed). 1794 targets,
> 78 skipped, 7 masked, 0 errors.
> 
> Build Configuration:
> BB_VERSION        = "1.19.1"
> BUILD_SYS         = "x86_64-linux"
> NATIVELSBSTRING   = "Debian-7.1"
> TARGET_SYS        = "arm-poky-linux-gnueabi"
> MACHINE           = "beagleboard"
> DISTRO            = "poky"
> DISTRO_VERSION    = "1.4+snapshot-20130723"
> TUNE_FEATURES     = "armv7a vfp neon"
> TARGET_FPU        = "vfp-neon"
> meta
> meta-yocto
> meta-yocto-bsp    = "master:3dee534f1e25109e0bdb681de0746c336f4b8840"
> meta-ti           = "master:41a214e8f675ecd5fa3a1408239f32ab77c033a2"
> meta-oe
> meta-networking
> meta-webserver    = "master:3ef8bfd7a9552637b2eeaadc01d5fb3ae5896025"
> 
> NOTE: Resolving any missing task queue dependencies
> NOTE: Preparing runqueue
> NOTE: Executing SetScene Tasks
> NOTE: Executing RunQueue Tasks
> WARNING: The recipe nativesdk-packagegroup-sdk-host is trying to install
> files into a shared area when those files already exist. Those files and
> their manifest location are:
> 
>  /home/hutch/yocto_master_beaglebone/poky/build/tmp/pkgdata/all-pokysdk-linu
> x/nativesdk-packagegroup-sdk-host Matched in
> manifest-x86_64-nativesdk-packagegroup-sdk-host.packagedata
> 
>  /home/hutch/yocto_master_beaglebone/poky/build/tmp/pkgdata/all-pokysdk-linu
> x/runtime/nativesdk-packagegroup-sdk-host.packaged Matched in
> manifest-x86_64-nativesdk-packagegroup-sdk-host.packagedata
> 
>  /home/hutch/yocto_master_beaglebone/poky/build/tmp/pkgdata/all-pokysdk-linu
> x/runtime/nativesdk-packagegroup-sdk-host Matched in
> manifest-x86_64-nativesdk-packagegroup-sdk-host.packagedata
> 
>  /home/hutch/yocto_master_beaglebone/poky/build/tmp/pkgdata/all-pokysdk-linu
> x/runtime-reverse/nativesdk-packagegroup-sdk-host Matched in
> manifest-x86_64-nativesdk-packagegroup-sdk-host.packagedata Please verify
> which package should provide the above files.
> 
> 
> Should I be worried or do I need to do something about the
> nativesdk-packagegroup-sdk-host warnings?
> 
> I've never seen them before and I couldn't find anyone else talking about
> them so I thought I'd ask.

Depends. Without looking at the recipe and output closely it's hard to tell 
whether this is indicative or a problem or not, but it should be resolved by 
the meta-ti maintainers. Denys, you might want to take a closer look at this.

Cheers,
Paul

-- 

Paul Eggleton
Intel Open Source Technology Centre


  reply	other threads:[~2013-07-23 15:14 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-07-23 14:13 Should I be worried about this nativesdk-packagegroup-sdk-host warning while building meta-toolchain Brian Hutchinson
2013-07-23 15:13 ` Paul Eggleton [this message]
2013-07-23 15:34   ` Denys Dmytriyenko
2013-07-23 15:56     ` Brian Hutchinson
2013-07-23 17:18     ` Paul Eggleton
2013-07-23 22:01     ` Christian Gagneraud
2013-10-29 20:47       ` Brian Hutchinson
2013-07-23 17:19 ` Paul Eggleton
2013-07-23 17:23   ` Brian Hutchinson
2013-07-23 17:35     ` Paul Eggleton
2013-07-23 17:44       ` Khem Raj
2013-07-23 17:31 ` Khem Raj

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1503447.VStvRngV5W@helios \
    --to=paul.eggleton@linux.intel.com \
    --cc=b.hutchman@gmail.com \
    --cc=denys@ti.com \
    --cc=yocto@yoctoproject.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.