Patch "iio: adc: ti-ads1015: don't return invalid value from buffer setup callbacks" has been added to the 4.9-stable tree

Patch "iio: adc: ti-ads1015: don't return invalid value from buffer setup callbacks" has been added to the 4.9-stable tree

[gregkh]

This is a note to let you know that I've just added the patch titled

    iio: adc: ti-ads1015: don't return invalid value from buffer setup callbacks

to the 4.9-stable tree which can be found at:
    http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
     iio-adc-ti-ads1015-don-t-return-invalid-value-from-buffer-setup-callbacks.patch
and it can be found in the queue-4.9 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@vger.kernel.org> know about it.


>From a6fe5e52d5ecfc98530034d6c9db73777cf41ede Mon Sep 17 00:00:00 2001
From: Akinobu Mita <akinobu.mita@gmail.com>
Date: Fri, 21 Jul 2017 00:24:21 +0900
Subject: iio: adc: ti-ads1015: don't return invalid value from buffer setup callbacks

From: Akinobu Mita <akinobu.mita@gmail.com>

commit a6fe5e52d5ecfc98530034d6c9db73777cf41ede upstream.

pm_runtime_get_sync() and pm_runtime_put_autosuspend() return 0 on
success, 1 if the device's runtime PM status was already requested status
or error code on failure.  So a positive return value doesn't indicate an
error condition.

However, any non-zero return values from buffer preenable and postdisable
callbacks are recognized as an error and this driver reuses the return
value from pm_runtime_get_sync() and pm_runtime_put_autosuspend() in
these callbacks.  This change fixes the false error detections.

Cc: Daniel Baluta <daniel.baluta@gmail.com>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/iio/adc/ti-ads1015.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/iio/adc/ti-ads1015.c
+++ b/drivers/iio/adc/ti-ads1015.c
@@ -234,7 +234,7 @@ static int ads1015_set_power_state(struc
 		ret = pm_runtime_put_autosuspend(dev);
 	}
 
-	return ret;
+	return ret < 0 ? ret : 0;
 }
 
 static


Patches currently in stable-queue which might be from akinobu.mita@gmail.com are

queue-4.9/iio-adc-ti-ads1015-enable-conversion-when-config_pm-is-not-set.patch
queue-4.9/iio-adc-ti-ads1015-add-adequate-wait-time-to-get-correct-conversion.patch
queue-4.9/iio-adc-ti-ads1015-don-t-return-invalid-value-from-buffer-setup-callbacks.patch
queue-4.9/iio-adc-ti-ads1015-fix-incorrect-data-rate-setting-update.patch
queue-4.9/iio-adc-ti-ads1015-fix-scale-information-for-ads1115.patch
queue-4.9/iio-adc-ti-ads1015-avoid-getting-stale-result-after-runtime-resume.patch