All of lore.kernel.org
 help / color / mirror / Atom feed
From: Ram Pai <linuxram@us.ibm.com>
To: mpe@ellerman.id.au, linuxppc-dev@lists.ozlabs.org
Cc: benh@kernel.crashing.org, paulus@samba.org,
	khandual@linux.vnet.ibm.com, aneesh.kumar@linux.vnet.ibm.com,
	bsingharora@gmail.com, hbabu@us.ibm.com, mhocko@kernel.org,
	bauerman@linux.vnet.ibm.com, ebiederm@xmission.com,
	linuxram@us.ibm.com
Subject: [PATCH 4/7] powerpc: Free up four 64K PTE bits in 64K backed HPTE pages
Date: Fri,  8 Sep 2017 15:44:44 -0700	[thread overview]
Message-ID: <1504910713-7094-5-git-send-email-linuxram@us.ibm.com> (raw)
In-Reply-To: <1504910713-7094-1-git-send-email-linuxram@us.ibm.com>

Rearrange 64K PTE bits to  free  up  bits 3, 4, 5  and  6
in the 64K backed HPTE pages. This along with the earlier
patch will  entirely free  up the four bits from 64K PTE.
The bit numbers are  big-endian as defined in the  ISA3.0

This patch  does  the  following change to 64K PTE backed
by 64K HPTE.

H_PAGE_F_SECOND (S) which  occupied  bit  4  moves to the
	second part of the pte to bit 60.
H_PAGE_F_GIX (G,I,X) which  occupied  bit 5, 6 and 7 also
	moves  to  the   second part of the pte to bit 61,
       	62, 63, 64 respectively

since bit 7 is now freed up, we move H_PAGE_BUSY (B) from
bit  9  to  bit  7.

The second part of the PTE will hold
(H_PAGE_F_SECOND|H_PAGE_F_GIX) at bit 60,61,62,63.
NOTE: None of the bits in the secondary PTE were not used
by 64k-HPTE backed PTE.

Before the patch, the 64K HPTE backed 64k PTE format was
as follows

 0 1 2 3 4  5  6  7  8 9 10...........................63
 : : : : :  :  :  :  : : :                            :
 v v v v v  v  v  v  v v v                            v

,-,-,-,-,--,--,--,--,-,-,-,-,-,------------------,-,-,-,
|x|x|x| |S |G |I |X |x|B| |x|x|................|x|x|x|x| <- primary pte
'_'_'_'_'__'__'__'__'_'_'_'_'_'________________'_'_'_'_'
| | | | |  |  |  |  | | | | |..................| | | | | <- secondary pte
'_'_'_'_'__'__'__'__'_'_'_'_'__________________'_'_'_'_'

After the patch, the 64k HPTE backed 64k PTE format is
as follows

 0 1 2 3 4  5  6  7  8 9 10...........................63
 : : : : :  :  :  :  : : :                            :
 v v v v v  v  v  v  v v v                            v

,-,-,-,-,--,--,--,--,-,-,-,-,-,------------------,-,-,-,
|x|x|x| |  |  |  |B |x| | |x|x|................|.|.|.|.| <- primary pte
'_'_'_'_'__'__'__'__'_'_'_'_'_'________________'_'_'_'_'
| | | | |  |  |  |  | | | | |..................|S|G|I|X| <- secondary pte
'_'_'_'_'__'__'__'__'_'_'_'_'__________________'_'_'_'_'

The above PTE changes is applicable to hugetlbpages aswell.

The patch does the following code changes:

a) moves  the  H_PAGE_F_SECOND and  H_PAGE_F_GIX to 4k PTE
	header   since it is no more needed b the 64k PTEs.
b) abstracts  out __real_pte() and __rpte_to_hidx() so the
	caller  need not know the bit location of the slot.
c) moves the slot bits to the secondary pte.

Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Ram Pai <linuxram@us.ibm.com>
---
 arch/powerpc/include/asm/book3s/64/hash-4k.h  |    3 ++
 arch/powerpc/include/asm/book3s/64/hash-64k.h |   29 +++++++++++-------------
 arch/powerpc/include/asm/book3s/64/hash.h     |    3 --
 arch/powerpc/mm/hash64_64k.c                  |   23 ++++++++-----------
 arch/powerpc/mm/hugetlbpage-hash64.c          |   18 ++++++---------
 5 files changed, 33 insertions(+), 43 deletions(-)

diff --git a/arch/powerpc/include/asm/book3s/64/hash-4k.h b/arch/powerpc/include/asm/book3s/64/hash-4k.h
index e66bfeb..dc153c6 100644
--- a/arch/powerpc/include/asm/book3s/64/hash-4k.h
+++ b/arch/powerpc/include/asm/book3s/64/hash-4k.h
@@ -16,6 +16,9 @@
 #define H_PUD_TABLE_SIZE	(sizeof(pud_t) << H_PUD_INDEX_SIZE)
 #define H_PGD_TABLE_SIZE	(sizeof(pgd_t) << H_PGD_INDEX_SIZE)
 
+#define H_PAGE_F_GIX_SHIFT	56
+#define H_PAGE_F_SECOND	_RPAGE_RSV2	/* HPTE is in 2ndary HPTEG */
+#define H_PAGE_F_GIX	(_RPAGE_RSV3 | _RPAGE_RSV4 | _RPAGE_RPN44)
 #define H_PAGE_BUSY	_RPAGE_RSV1     /* software: PTE & hash are busy */
 
 /* PTE flags to conserve for HPTE identification */
diff --git a/arch/powerpc/include/asm/book3s/64/hash-64k.h b/arch/powerpc/include/asm/book3s/64/hash-64k.h
index e038f1c..89ef5a9 100644
--- a/arch/powerpc/include/asm/book3s/64/hash-64k.h
+++ b/arch/powerpc/include/asm/book3s/64/hash-64k.h
@@ -12,7 +12,7 @@
  */
 #define H_PAGE_COMBO	_RPAGE_RPN0 /* this is a combo 4k page */
 #define H_PAGE_4K_PFN	_RPAGE_RPN1 /* PFN is for a single 4k page */
-#define H_PAGE_BUSY	_RPAGE_RPN42     /* software: PTE & hash are busy */
+#define H_PAGE_BUSY	_RPAGE_RPN44     /* software: PTE & hash are busy */
 
 /*
  * We need to differentiate between explicit huge page and THP huge
@@ -21,8 +21,7 @@
 #define H_PAGE_THP_HUGE  H_PAGE_4K_PFN
 
 /* PTE flags to conserve for HPTE identification */
-#define _PAGE_HPTEFLAGS (H_PAGE_BUSY | H_PAGE_F_SECOND | \
-			 H_PAGE_F_GIX | H_PAGE_HASHPTE | H_PAGE_COMBO)
+#define _PAGE_HPTEFLAGS (H_PAGE_BUSY | H_PAGE_HASHPTE | H_PAGE_COMBO)
 /*
  * we support 16 fragments per PTE page of 64K size.
  */
@@ -50,24 +49,22 @@ static inline real_pte_t __real_pte(pte_t pte, pte_t *ptep)
 	unsigned long *hidxp;
 
 	rpte.pte = pte;
-	rpte.hidx = 0;
-	if (pte_val(pte) & H_PAGE_COMBO) {
-		/*
-		 * Make sure we order the hidx load against the H_PAGE_COMBO
-		 * check. The store side ordering is done in __hash_page_4K
-		 */
-		smp_rmb();
-		hidxp = (unsigned long *)(ptep + PTRS_PER_PTE);
-		rpte.hidx = *hidxp;
-	}
+	/*
+	 * Ensure that we do not read the hidx before we read
+	 * the pte. Because the writer side is  expected
+	 * to finish writing the hidx first followed by the pte,
+	 * by using smp_wmb().
+	 * pte_set_hash_slot() ensures that.
+	 */
+	smp_rmb();
+	hidxp = (unsigned long *)(ptep + PTRS_PER_PTE);
+	rpte.hidx = *hidxp;
 	return rpte;
 }
 
 static inline unsigned long __rpte_to_hidx(real_pte_t rpte, unsigned long index)
 {
-	if ((pte_val(rpte.pte) & H_PAGE_COMBO))
-		return (rpte.hidx >> (index<<2)) & 0xf;
-	return (pte_val(rpte.pte) >> H_PAGE_F_GIX_SHIFT) & 0xf;
+	return ((rpte.hidx >> (index<<2)) & 0xfUL);
 }
 
 /*
diff --git a/arch/powerpc/include/asm/book3s/64/hash.h b/arch/powerpc/include/asm/book3s/64/hash.h
index 8ce4112..46f3a23 100644
--- a/arch/powerpc/include/asm/book3s/64/hash.h
+++ b/arch/powerpc/include/asm/book3s/64/hash.h
@@ -8,9 +8,6 @@
  *
  */
 #define H_PTE_NONE_MASK		_PAGE_HPTEFLAGS
-#define H_PAGE_F_GIX_SHIFT	56
-#define H_PAGE_F_SECOND		_RPAGE_RSV2	/* HPTE is in 2ndary HPTEG */
-#define H_PAGE_F_GIX		(_RPAGE_RSV3 | _RPAGE_RSV4 | _RPAGE_RPN44)
 #define H_PAGE_HASHPTE		_RPAGE_RPN43	/* PTE has associated HPTE */
 
 #ifdef CONFIG_PPC_64K_PAGES
diff --git a/arch/powerpc/mm/hash64_64k.c b/arch/powerpc/mm/hash64_64k.c
index c6c5559..9c63844 100644
--- a/arch/powerpc/mm/hash64_64k.c
+++ b/arch/powerpc/mm/hash64_64k.c
@@ -103,8 +103,8 @@ int __hash_page_4K(unsigned long ea, unsigned long access, unsigned long vsid,
 		 * On hash insert failure we use old pte value and we don't
 		 * want slot information there if we have a insert failure.
 		 */
-		old_pte &= ~(H_PAGE_HASHPTE | H_PAGE_F_GIX | H_PAGE_F_SECOND);
-		new_pte &= ~(H_PAGE_HASHPTE | H_PAGE_F_GIX | H_PAGE_F_SECOND);
+		old_pte &= ~H_PAGE_HASHPTE;
+		new_pte &= ~H_PAGE_HASHPTE;
 		goto htab_insert_hpte;
 	}
 	/*
@@ -227,6 +227,7 @@ int __hash_page_64K(unsigned long ea, unsigned long access,
 		    unsigned long vsid, pte_t *ptep, unsigned long trap,
 		    unsigned long flags, int ssize)
 {
+	real_pte_t rpte;
 	unsigned long hpte_group;
 	unsigned long rflags, pa;
 	unsigned long old_pte, new_pte;
@@ -263,6 +264,7 @@ int __hash_page_64K(unsigned long ea, unsigned long access,
 	} while (!pte_xchg(ptep, __pte(old_pte), __pte(new_pte)));
 
 	rflags = htab_convert_pte_flags(new_pte);
+	rpte = __real_pte(__pte(old_pte), ptep);
 
 	if (cpu_has_feature(CPU_FTR_NOEXECUTE) &&
 	    !cpu_has_feature(CPU_FTR_COHERENT_ICACHE))
@@ -270,18 +272,13 @@ int __hash_page_64K(unsigned long ea, unsigned long access,
 
 	vpn  = hpt_vpn(ea, vsid, ssize);
 	if (unlikely(old_pte & H_PAGE_HASHPTE)) {
+		unsigned long gslot;
 		/*
 		 * There MIGHT be an HPTE for this pte
 		 */
-		hash = hpt_hash(vpn, shift, ssize);
-		if (old_pte & H_PAGE_F_SECOND)
-			hash = ~hash;
-		slot = (hash & htab_hash_mask) * HPTES_PER_GROUP;
-		slot += (old_pte & H_PAGE_F_GIX) >> H_PAGE_F_GIX_SHIFT;
-
-		if (mmu_hash_ops.hpte_updatepp(slot, rflags, vpn, MMU_PAGE_64K,
-					       MMU_PAGE_64K, ssize,
-					       flags) == -1)
+		gslot = pte_get_hash_gslot(vpn, shift, ssize, rpte, 0);
+		if (mmu_hash_ops.hpte_updatepp(gslot, rflags, vpn, MMU_PAGE_64K,
+				MMU_PAGE_64K, ssize, flags) == -1)
 			old_pte &= ~_PAGE_HPTEFLAGS;
 	}
 
@@ -328,9 +325,9 @@ int __hash_page_64K(unsigned long ea, unsigned long access,
 					   MMU_PAGE_64K, MMU_PAGE_64K, old_pte);
 			return -1;
 		}
+
 		new_pte = (new_pte & ~_PAGE_HPTEFLAGS) | H_PAGE_HASHPTE;
-		new_pte |= (slot << H_PAGE_F_GIX_SHIFT) &
-			(H_PAGE_F_SECOND | H_PAGE_F_GIX);
+		new_pte |= pte_set_hash_slot(ptep, rpte, 0, slot);
 	}
 	*ptep = __pte(new_pte & ~H_PAGE_BUSY);
 	return 0;
diff --git a/arch/powerpc/mm/hugetlbpage-hash64.c b/arch/powerpc/mm/hugetlbpage-hash64.c
index a84bb44..d52d667 100644
--- a/arch/powerpc/mm/hugetlbpage-hash64.c
+++ b/arch/powerpc/mm/hugetlbpage-hash64.c
@@ -22,6 +22,7 @@ int __hash_page_huge(unsigned long ea, unsigned long access, unsigned long vsid,
 		     pte_t *ptep, unsigned long trap, unsigned long flags,
 		     int ssize, unsigned int shift, unsigned int mmu_psize)
 {
+	real_pte_t rpte;
 	unsigned long vpn;
 	unsigned long old_pte, new_pte;
 	unsigned long rflags, pa, sz;
@@ -61,6 +62,7 @@ int __hash_page_huge(unsigned long ea, unsigned long access, unsigned long vsid,
 	} while(!pte_xchg(ptep, __pte(old_pte), __pte(new_pte)));
 
 	rflags = htab_convert_pte_flags(new_pte);
+	rpte = __real_pte(__pte(old_pte), ptep);
 
 	sz = ((1UL) << shift);
 	if (!cpu_has_feature(CPU_FTR_COHERENT_ICACHE))
@@ -71,16 +73,11 @@ int __hash_page_huge(unsigned long ea, unsigned long access, unsigned long vsid,
 	/* Check if pte already has an hpte (case 2) */
 	if (unlikely(old_pte & H_PAGE_HASHPTE)) {
 		/* There MIGHT be an HPTE for this pte */
-		unsigned long hash, slot;
+		unsigned long gslot;
 
-		hash = hpt_hash(vpn, shift, ssize);
-		if (old_pte & H_PAGE_F_SECOND)
-			hash = ~hash;
-		slot = (hash & htab_hash_mask) * HPTES_PER_GROUP;
-		slot += (old_pte & H_PAGE_F_GIX) >> H_PAGE_F_GIX_SHIFT;
-
-		if (mmu_hash_ops.hpte_updatepp(slot, rflags, vpn, mmu_psize,
-					       mmu_psize, ssize, flags) == -1)
+		gslot = pte_get_hash_gslot(vpn, shift, ssize, rpte, 0);
+		if (mmu_hash_ops.hpte_updatepp(gslot, rflags, vpn, mmu_psize,
+				mmu_psize, ssize, flags) == -1)
 			old_pte &= ~_PAGE_HPTEFLAGS;
 	}
 
@@ -106,8 +103,7 @@ int __hash_page_huge(unsigned long ea, unsigned long access, unsigned long vsid,
 			return -1;
 		}
 
-		new_pte |= (slot << H_PAGE_F_GIX_SHIFT) &
-			(H_PAGE_F_SECOND | H_PAGE_F_GIX);
+		new_pte |= pte_set_hash_slot(ptep, rpte, 0, slot);
 	}
 
 	/*
-- 
1.7.1

  parent reply	other threads:[~2017-09-08 22:46 UTC|newest]

Thread overview: 134+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-09-08 22:44 [PATCH 0/7] powerpc: Free up RPAGE_RSV bits Ram Pai
2017-09-08 22:44 ` [PATCH 1/7] powerpc: introduce pte_set_hash_slot() helper Ram Pai
2017-09-13  7:55   ` Balbir Singh
2017-10-19  4:52   ` Michael Ellerman
2017-09-08 22:44 ` [PATCH 2/7] powerpc: introduce pte_get_hash_gslot() helper Ram Pai
2017-09-13  9:32   ` Balbir Singh
2017-09-13 20:10     ` Ram Pai
2017-09-08 22:44 ` [PATCH 3/7] powerpc: Free up four 64K PTE bits in 4K backed HPTE pages Ram Pai
2017-09-14  1:18   ` Balbir Singh
2017-10-19  3:25   ` Michael Ellerman
2017-10-19 17:02     ` Ram Pai
2017-10-23  8:47     ` Aneesh Kumar K.V
2017-10-23 16:29       ` Ram Pai
2017-10-25  9:18         ` Michael Ellerman
2017-10-26  6:08           ` Ram Pai
2017-09-08 22:44 ` Ram Pai [this message]
2017-09-14  1:44   ` [PATCH 4/7] powerpc: Free up four 64K PTE bits in 64K " Balbir Singh
2017-09-14 17:54     ` Ram Pai
2017-09-14 18:25       ` Ram Pai
2017-09-14  8:13   ` Benjamin Herrenschmidt
2017-10-23  8:52     ` Aneesh Kumar K.V
2017-10-23 23:42       ` Ram Pai
2017-10-23 19:22     ` Ram Pai
2017-10-24  3:37       ` Aneesh Kumar K.V
2017-09-08 22:44 ` [PATCH 5/7] powerpc: Swizzle around 4K PTE bits to free up bit 5 and bit 6 Ram Pai
2017-09-14  1:48   ` Balbir Singh
2017-09-14 17:23     ` Ram Pai
2017-09-08 22:44 ` [PATCH 6/7] powerpc: use helper functions to get and set hash slots Ram Pai
2017-09-08 22:44 ` [PATCH 7/7] powerpc: capture the PTE format changes in the dump pte report Ram Pai
2017-09-14  3:22   ` Balbir Singh
2017-09-14 17:19     ` Ram Pai
2017-09-08 22:44 ` [PATCH 00/25] powerpc: Memory Protection Keys Ram Pai
2017-09-08 22:44 ` [PATCH 01/25] powerpc: initial pkey plumbing Ram Pai
2017-09-14  3:32   ` Balbir Singh
2017-09-14 16:17     ` Ram Pai
2017-10-19  4:20   ` Michael Ellerman
2017-10-19 17:11     ` Ram Pai
2017-10-24  8:17       ` Michael Ellerman
2017-09-08 22:44 ` [PATCH 02/25] powerpc: define an additional vma bit for protection keys Ram Pai
2017-09-14  4:38   ` Balbir Singh
2017-09-14  8:11     ` Benjamin Herrenschmidt
2017-10-23 21:06       ` Ram Pai
2017-09-14 16:15     ` Ram Pai
2017-10-23  9:25   ` Aneesh Kumar K.V
2017-10-23  9:28     ` Aneesh Kumar K.V
2017-10-23 17:57       ` Ram Pai
2017-10-23 17:43     ` Ram Pai
2017-09-08 22:44 ` [PATCH 03/25] powerpc: track allocation status of all pkeys Ram Pai
2017-10-07 10:02   ` Michael Ellerman
2017-10-08 23:02     ` Ram Pai
2017-10-18  2:47   ` Balbir Singh
2017-10-23  9:41   ` Aneesh Kumar K.V
2017-10-23 18:14     ` Ram Pai
2017-10-24  6:28   ` Aneesh Kumar K.V
2017-10-24  7:23     ` Ram Pai
2017-09-08 22:44 ` [PATCH 04/25] powerpc: helper function to read, write AMR, IAMR, UAMOR registers Ram Pai
2017-10-18  3:17   ` [PATCH 04/25] powerpc: helper function to read,write AMR,IAMR,UAMOR registers Balbir Singh
2017-10-18  3:42     ` Ram Pai
2017-09-08 22:44 ` [PATCH 05/25] powerpc: helper functions to initialize AMR, IAMR and UAMOR registers Ram Pai
2017-10-18  3:24   ` Balbir Singh
2017-10-18 20:38     ` Ram Pai
2017-10-24  6:25   ` Aneesh Kumar K.V
2017-10-24  7:04     ` Ram Pai
2017-10-24  8:29       ` Michael Ellerman
2017-09-08 22:44 ` [PATCH 06/25] powerpc: cleaup AMR, iAMR when a key is allocated or freed Ram Pai
2017-10-18  3:34   ` [PATCH 06/25] powerpc: cleaup AMR,iAMR " Balbir Singh
2017-10-23  9:43     ` [PATCH 06/25] powerpc: cleaup AMR, iAMR " Aneesh Kumar K.V
2017-10-23 18:36       ` [PATCH 06/25] powerpc: cleaup AMR,iAMR " Ram Pai
2017-10-23  9:43   ` [PATCH 06/25] powerpc: cleaup AMR, iAMR " Aneesh Kumar K.V
2017-10-23 18:29     ` [PATCH 06/25] powerpc: cleaup AMR,iAMR " Ram Pai
2017-09-08 22:44 ` [PATCH 07/25] powerpc: implementation for arch_set_user_pkey_access() Ram Pai
2017-09-08 22:44 ` [PATCH 08/25] powerpc: sys_pkey_alloc() and sys_pkey_free() system calls Ram Pai
2017-10-24 15:48   ` Michael Ellerman
2017-10-24 18:34     ` Ram Pai
2017-10-25  9:26       ` Michael Ellerman
2017-09-08 22:44 ` [PATCH 09/25] powerpc: ability to create execute-disabled pkeys Ram Pai
2017-10-18  3:42   ` Balbir Singh
2017-10-18  5:15     ` Ram Pai
2017-10-24  6:58       ` Aneesh Kumar K.V
2017-10-24  7:20         ` Ram Pai
2017-10-24  4:36   ` Aneesh Kumar K.V
2017-10-28 23:18     ` Ram Pai
2017-09-08 22:44 ` [PATCH 10/25] powerpc: store and restore the pkey state across context switches Ram Pai
2017-10-18  3:49   ` Balbir Singh
2017-10-18 20:47     ` Ram Pai
2017-10-18 23:00       ` Balbir Singh
2017-10-19  0:52         ` Ram Pai
2017-09-08 22:44 ` [PATCH 11/25] powerpc: introduce execute-only pkey Ram Pai
2017-10-18  4:15   ` Balbir Singh
2017-10-18 20:57     ` Ram Pai
2017-10-18 23:02       ` Balbir Singh
2017-10-19 15:52         ` Ram Pai
2017-09-08 22:45 ` [PATCH 12/25] powerpc: ability to associate pkey to a vma Ram Pai
2017-10-18  4:27   ` Balbir Singh
2017-10-18 21:01     ` Ram Pai
2017-09-08 22:45 ` [PATCH 13/25] powerpc: implementation for arch_override_mprotect_pkey() Ram Pai
2017-10-18  4:36   ` Balbir Singh
2017-10-18 21:10     ` Ram Pai
2017-10-18 23:04       ` Balbir Singh
2017-10-19 16:39         ` Ram Pai
2017-09-08 22:45 ` [PATCH 14/25] powerpc: map vma key-protection bits to pte key bits Ram Pai
2017-10-18  4:39   ` Balbir Singh
2017-10-18 21:14     ` Ram Pai
2017-09-08 22:45 ` [PATCH 15/25] powerpc: sys_pkey_mprotect() system call Ram Pai
2017-09-08 22:45 ` [PATCH 16/25] powerpc: Program HPTE key protection bits Ram Pai
2017-10-18  4:43   ` Balbir Singh
2017-09-08 22:45 ` [PATCH 17/25] powerpc: helper to validate key-access permissions of a pte Ram Pai
2017-10-18  4:48   ` Balbir Singh
2017-10-18 21:19     ` Ram Pai
2017-09-08 22:45 ` [PATCH 18/25] powerpc: check key protection for user page access Ram Pai
2017-10-18 19:57   ` Balbir Singh
2017-10-18 21:29     ` Ram Pai
2017-10-18 23:08       ` Balbir Singh
2017-10-19 16:46         ` Ram Pai
2017-09-08 22:45 ` [PATCH 19/25] powerpc: implementation for arch_vma_access_permitted() Ram Pai
2017-10-18 23:20   ` Balbir Singh
2017-10-24 15:48   ` Michael Ellerman
2017-09-08 22:45 ` [PATCH 20/25] powerpc: Handle exceptions caused by pkey violation Ram Pai
2017-10-18 23:27   ` Balbir Singh
2017-10-19 16:53     ` Ram Pai
2017-10-24 15:47   ` Michael Ellerman
2017-10-24 18:26     ` Ram Pai
2017-10-29 14:03     ` Aneesh Kumar K.V
2017-10-30  0:37       ` Ram Pai
2017-09-08 22:45 ` [PATCH 21/25] powerpc: introduce get_pte_pkey() helper Ram Pai
2017-10-18 23:29   ` Balbir Singh
2017-10-19 16:55     ` Ram Pai
2017-09-08 22:45 ` [PATCH 22/25] powerpc: capture the violated protection key on fault Ram Pai
2017-10-24 15:46   ` Michael Ellerman
2017-09-08 22:45 ` [PATCH 23/25] powerpc: Deliver SEGV signal on pkey violation Ram Pai
2017-10-24 15:46   ` Michael Ellerman
2017-10-24 17:19     ` Ram Pai
2017-09-08 22:45 ` [PATCH 24/25] powerpc/ptrace: Add memory protection key regset Ram Pai
2017-09-08 22:45 ` [PATCH 25/25] powerpc: Enable pkey subsystem Ram Pai

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1504910713-7094-5-git-send-email-linuxram@us.ibm.com \
    --to=linuxram@us.ibm.com \
    --cc=aneesh.kumar@linux.vnet.ibm.com \
    --cc=bauerman@linux.vnet.ibm.com \
    --cc=benh@kernel.crashing.org \
    --cc=bsingharora@gmail.com \
    --cc=ebiederm@xmission.com \
    --cc=hbabu@us.ibm.com \
    --cc=khandual@linux.vnet.ibm.com \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=mhocko@kernel.org \
    --cc=mpe@ellerman.id.au \
    --cc=paulus@samba.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.