From: Abhishek Sahu <absahu@codeaurora.org>
To: Stephen Boyd <sboyd@codeaurora.org>,
Michael Turquette <mturquette@baylibre.com>
Cc: Andy Gross <andy.gross@linaro.org>,
David Brown <david.brown@linaro.org>,
linux-arm-msm@vger.kernel.org, linux-soc@vger.kernel.org,
linux-clk@vger.kernel.org, linux-kernel@vger.kernel.org,
Abhishek Sahu <absahu@codeaurora.org>
Subject: [PATCH 09/11] clk: qcom: ipq8074: add GP and Crypto clocks
Date: Tue, 26 Sep 2017 17:54:02 +0530 [thread overview]
Message-ID: <1506428644-2996-10-git-send-email-absahu@codeaurora.org> (raw)
In-Reply-To: <1506428644-2996-1-git-send-email-absahu@codeaurora.org>
- It has 3 general purpose clock controller which supplies
the clock in GPIO pins.
- It has Crypto Engine which has AXI, AHB and Core clocks.
Other non APSS processors can also use Crypto Engine so
these clocks are marked as VOTED clocks.
Signed-off-by: Abhishek Sahu <absahu@codeaurora.org>
---
drivers/clk/qcom/gcc-ipq8074.c | 199 +++++++++++++++++++++++++++++++++++++++++
1 file changed, 199 insertions(+)
diff --git a/drivers/clk/qcom/gcc-ipq8074.c b/drivers/clk/qcom/gcc-ipq8074.c
index 54f96bb..52b859b 100644
--- a/drivers/clk/qcom/gcc-ipq8074.c
+++ b/drivers/clk/qcom/gcc-ipq8074.c
@@ -390,6 +390,22 @@ enum {
{ P_BIAS_PLL, 6 },
};
+static const char * const gcc_xo_gpll0_gpll6_gpll0_sleep_clk[] = {
+ "xo",
+ "gpll0",
+ "gpll6",
+ "gpll0_out_main_div2",
+ "sleep_clk",
+};
+
+static const struct parent_map gcc_xo_gpll0_gpll6_gpll0_sleep_clk_map[] = {
+ { P_XO, 0 },
+ { P_GPLL0, 1 },
+ { P_GPLL6, 2 },
+ { P_GPLL0_DIV2, 4 },
+ { P_SLEEP_CLK, 6 },
+};
+
static struct clk_alpha_pll gpll0_main = {
.offset = 0x21000,
.clkr = {
@@ -1925,6 +1941,74 @@ enum {
},
};
+static struct freq_tbl ftbl_crypto_clk_src[] = {
+ F(40000000, P_GPLL0_DIV2, 10, 0, 0),
+ F(80000000, P_GPLL0, 10, 0, 0),
+ F(100000000, P_GPLL0, 8, 0, 0),
+ F(160000000, P_GPLL0, 5, 0, 0),
+ { }
+};
+
+static struct clk_rcg2 crypto_clk_src = {
+ .cmd_rcgr = 0x16004,
+ .freq_tbl = ftbl_crypto_clk_src,
+ .hid_width = 5,
+ .parent_map = gcc_xo_gpll0_gpll0_out_main_div2_map,
+ .clkr.hw.init = &(struct clk_init_data){
+ .name = "crypto_clk_src",
+ .parent_names = gcc_xo_gpll0_gpll0_out_main_div2,
+ .num_parents = 3,
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static struct freq_tbl ftbl_gp_clk_src[] = {
+ F(19200000, P_XO, 1, 0, 0),
+ { }
+};
+
+static struct clk_rcg2 gp1_clk_src = {
+ .cmd_rcgr = 0x08004,
+ .freq_tbl = ftbl_gp_clk_src,
+ .mnd_width = 8,
+ .hid_width = 5,
+ .parent_map = gcc_xo_gpll0_gpll6_gpll0_sleep_clk_map,
+ .clkr.hw.init = &(struct clk_init_data){
+ .name = "gp1_clk_src",
+ .parent_names = gcc_xo_gpll0_gpll6_gpll0_sleep_clk,
+ .num_parents = 5,
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static struct clk_rcg2 gp2_clk_src = {
+ .cmd_rcgr = 0x09004,
+ .freq_tbl = ftbl_gp_clk_src,
+ .mnd_width = 8,
+ .hid_width = 5,
+ .parent_map = gcc_xo_gpll0_gpll6_gpll0_sleep_clk_map,
+ .clkr.hw.init = &(struct clk_init_data){
+ .name = "gp2_clk_src",
+ .parent_names = gcc_xo_gpll0_gpll6_gpll0_sleep_clk,
+ .num_parents = 5,
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static struct clk_rcg2 gp3_clk_src = {
+ .cmd_rcgr = 0x0a004,
+ .freq_tbl = ftbl_gp_clk_src,
+ .mnd_width = 8,
+ .hid_width = 5,
+ .parent_map = gcc_xo_gpll0_gpll6_gpll0_sleep_clk_map,
+ .clkr.hw.init = &(struct clk_init_data){
+ .name = "gp3_clk_src",
+ .parent_names = gcc_xo_gpll0_gpll6_gpll0_sleep_clk,
+ .num_parents = 5,
+ .ops = &clk_rcg2_ops,
+ },
+};
+
static struct clk_branch gcc_blsp1_ahb_clk = {
.halt_reg = 0x01008,
.clkr = {
@@ -4123,6 +4207,111 @@ enum {
},
};
+static struct clk_branch gcc_crypto_ahb_clk = {
+ .halt_reg = 0x16024,
+ .halt_check = BRANCH_HALT_VOTED,
+ .clkr = {
+ .enable_reg = 0x0b004,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_crypto_ahb_clk",
+ .parent_names = (const char *[]){
+ "pcnoc_clk_src"
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_crypto_axi_clk = {
+ .halt_reg = 0x16020,
+ .halt_check = BRANCH_HALT_VOTED,
+ .clkr = {
+ .enable_reg = 0x0b004,
+ .enable_mask = BIT(1),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_crypto_axi_clk",
+ .parent_names = (const char *[]){
+ "pcnoc_clk_src"
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_crypto_clk = {
+ .halt_reg = 0x1601c,
+ .halt_check = BRANCH_HALT_VOTED,
+ .clkr = {
+ .enable_reg = 0x0b004,
+ .enable_mask = BIT(2),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_crypto_clk",
+ .parent_names = (const char *[]){
+ "crypto_clk_src"
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_gp1_clk = {
+ .halt_reg = 0x08000,
+ .clkr = {
+ .enable_reg = 0x08000,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_gp1_clk",
+ .parent_names = (const char *[]){
+ "gp1_clk_src"
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_gp2_clk = {
+ .halt_reg = 0x09000,
+ .clkr = {
+ .enable_reg = 0x09000,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_gp2_clk",
+ .parent_names = (const char *[]){
+ "gp2_clk_src"
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_gp3_clk = {
+ .halt_reg = 0x0a000,
+ .clkr = {
+ .enable_reg = 0x0a000,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_gp3_clk",
+ .parent_names = (const char *[]){
+ "gp3_clk_src"
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
static struct clk_hw *gcc_ipq8074_hws[] = {
&gpll0_out_main_div2.hw,
&gpll6_out_main_div2.hw,
@@ -4219,6 +4408,10 @@ enum {
[NSS_PORT6_RX_DIV_CLK_SRC] = &nss_port6_rx_div_clk_src.clkr,
[NSS_PORT6_TX_CLK_SRC] = &nss_port6_tx_clk_src.clkr,
[NSS_PORT6_TX_DIV_CLK_SRC] = &nss_port6_tx_div_clk_src.clkr,
+ [CRYPTO_CLK_SRC] = &crypto_clk_src.clkr,
+ [GP1_CLK_SRC] = &gp1_clk_src.clkr,
+ [GP2_CLK_SRC] = &gp2_clk_src.clkr,
+ [GP3_CLK_SRC] = &gp3_clk_src.clkr,
[GCC_BLSP1_AHB_CLK] = &gcc_blsp1_ahb_clk.clkr,
[GCC_BLSP1_QUP1_I2C_APPS_CLK] = &gcc_blsp1_qup1_i2c_apps_clk.clkr,
[GCC_BLSP1_QUP1_SPI_APPS_CLK] = &gcc_blsp1_qup1_spi_apps_clk.clkr,
@@ -4348,6 +4541,12 @@ enum {
[GCC_UNIPHY1_PORT5_TX_CLK] = &gcc_uniphy1_port5_tx_clk.clkr,
[GCC_UNIPHY2_PORT6_RX_CLK] = &gcc_uniphy2_port6_rx_clk.clkr,
[GCC_UNIPHY2_PORT6_TX_CLK] = &gcc_uniphy2_port6_tx_clk.clkr,
+ [GCC_CRYPTO_AHB_CLK] = &gcc_crypto_ahb_clk.clkr,
+ [GCC_CRYPTO_AXI_CLK] = &gcc_crypto_axi_clk.clkr,
+ [GCC_CRYPTO_CLK] = &gcc_crypto_clk.clkr,
+ [GCC_GP1_CLK] = &gcc_gp1_clk.clkr,
+ [GCC_GP2_CLK] = &gcc_gp2_clk.clkr,
+ [GCC_GP3_CLK] = &gcc_gp3_clk.clkr,
};
static const struct qcom_reset_map gcc_ipq8074_resets[] = {
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
next prev parent reply other threads:[~2017-09-26 12:24 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-09-26 12:23 [PATCH 00/11] Add remaining clocks for QCOM IPQ8074 Abhishek Sahu
2017-09-26 12:23 ` [PATCH 01/11] clk: qcom: add read-only divider operations Abhishek Sahu
2017-09-26 12:23 ` [PATCH 02/11] clk: qcom: add parent map for regmap mux Abhishek Sahu
2017-09-26 12:23 ` [PATCH 03/11] clk: qcom: ipq8074: fix missing GPLL0 divider width Abhishek Sahu
2017-09-26 12:23 ` [PATCH 04/11] dt-bindings: clock: qcom: add remaining clocks for IPQ8074 Abhishek Sahu
2017-11-28 15:24 ` Abhishek Sahu
2017-09-26 12:23 ` [PATCH 05/11] clk: qcom: ipq8074: add remaining PLL’s Abhishek Sahu
2017-09-26 12:23 ` [PATCH 06/11] clk: qcom: ipq8074: add PCIE, USB and SDCC clocks Abhishek Sahu
2017-09-26 12:24 ` [PATCH 07/11] clk: qcom: ipq8074: add NSS clocks Abhishek Sahu
2017-09-26 12:24 ` [PATCH 08/11] clk: qcom: ipq8074: add NSS ethernet port clocks Abhishek Sahu
2017-09-26 12:24 ` Abhishek Sahu [this message]
2017-09-26 12:24 ` [PATCH 10/11] dt-bindings: clock: qcom: add misc resets for PCIE and NSS Abhishek Sahu
2017-11-28 15:25 ` Abhishek Sahu
2017-09-26 12:24 ` [PATCH 11/11] clk: qcom: ipq8074: " Abhishek Sahu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1506428644-2996-10-git-send-email-absahu@codeaurora.org \
--to=absahu@codeaurora.org \
--cc=andy.gross@linaro.org \
--cc=david.brown@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-soc@vger.kernel.org \
--cc=mturquette@baylibre.com \
--cc=sboyd@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.