From: Abhishek Sahu <absahu@codeaurora.org>
To: Stephen Boyd <sboyd@codeaurora.org>,
Michael Turquette <mturquette@baylibre.com>
Cc: Andy Gross <andy.gross@linaro.org>,
David Brown <david.brown@linaro.org>,
linux-arm-msm@vger.kernel.org, linux-soc@vger.kernel.org,
linux-clk@vger.kernel.org, linux-kernel@vger.kernel.org,
Abhishek Sahu <absahu@codeaurora.org>
Subject: [PATCH 05/11] clk: qcom: ipq8074: add remaining PLL’s
Date: Tue, 26 Sep 2017 17:53:58 +0530 [thread overview]
Message-ID: <1506428644-2996-6-git-send-email-absahu@codeaurora.org> (raw)
In-Reply-To: <1506428644-2996-1-git-send-email-absahu@codeaurora.org>
- GPLL2, GPLL4 and GPLL6 are general PLL clocks and parent
for all core peripherals.
- UBI PLL is mainly used by NSS (Network Switching System).
IPQ8074 has 2 instances of NSS UBI cores and UBI PLL will
be used to control the core frequency.
- NSS Crypto PLL is mainly used by NSS Crypto Engine which
supports the multiple cryptographic algorithm used in
Ethernet.
Signed-off-by: Abhishek Sahu <absahu@codeaurora.org>
---
drivers/clk/qcom/gcc-ipq8074.c | 178 +++++++++++++++++++++++++++++++++++++++++
1 file changed, 178 insertions(+)
diff --git a/drivers/clk/qcom/gcc-ipq8074.c b/drivers/clk/qcom/gcc-ipq8074.c
index f9b6d51..3af8f86 100644
--- a/drivers/clk/qcom/gcc-ipq8074.c
+++ b/drivers/clk/qcom/gcc-ipq8074.c
@@ -93,6 +93,173 @@ enum {
},
};
+static struct clk_alpha_pll gpll2_main = {
+ .offset = 0x4a000,
+ .clkr = {
+ .enable_reg = 0x0b000,
+ .enable_mask = BIT(2),
+ .hw.init = &(struct clk_init_data){
+ .name = "gpll2_main",
+ .parent_names = (const char *[]){
+ "xo"
+ },
+ .num_parents = 1,
+ .ops = &clk_alpha_pll_ops,
+ .flags = CLK_IS_CRITICAL,
+ },
+ },
+};
+
+static struct clk_alpha_pll_postdiv gpll2 = {
+ .offset = 0x4a000,
+ .width = 4,
+ .clkr.hw.init = &(struct clk_init_data){
+ .name = "gpll2",
+ .parent_names = (const char *[]){
+ "gpll2_main"
+ },
+ .num_parents = 1,
+ .ops = &clk_alpha_pll_postdiv_ops,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_alpha_pll gpll4_main = {
+ .offset = 0x24000,
+ .clkr = {
+ .enable_reg = 0x0b000,
+ .enable_mask = BIT(5),
+ .hw.init = &(struct clk_init_data){
+ .name = "gpll4_main",
+ .parent_names = (const char *[]){
+ "xo"
+ },
+ .num_parents = 1,
+ .ops = &clk_alpha_pll_ops,
+ .flags = CLK_IS_CRITICAL,
+ },
+ },
+};
+
+static struct clk_alpha_pll_postdiv gpll4 = {
+ .offset = 0x24000,
+ .width = 4,
+ .clkr.hw.init = &(struct clk_init_data){
+ .name = "gpll4",
+ .parent_names = (const char *[]){
+ "gpll4_main"
+ },
+ .num_parents = 1,
+ .ops = &clk_alpha_pll_postdiv_ops,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_alpha_pll gpll6_main = {
+ .offset = 0x37000,
+ .clkr = {
+ .enable_reg = 0x0b000,
+ .enable_mask = BIT(7),
+ .hw.init = &(struct clk_init_data){
+ .name = "gpll6_main",
+ .parent_names = (const char *[]){
+ "xo"
+ },
+ .num_parents = 1,
+ .ops = &clk_alpha_pll_ops,
+ .flags = CLK_IS_CRITICAL,
+ },
+ },
+};
+
+static struct clk_alpha_pll_postdiv gpll6 = {
+ .offset = 0x37000,
+ .width = 2,
+ .clkr.hw.init = &(struct clk_init_data){
+ .name = "gpll6",
+ .parent_names = (const char *[]){
+ "gpll6_main"
+ },
+ .num_parents = 1,
+ .ops = &clk_alpha_pll_postdiv_ops,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_fixed_factor gpll6_out_main_div2 = {
+ .mult = 1,
+ .div = 2,
+ .hw.init = &(struct clk_init_data){
+ .name = "gpll6_out_main_div2",
+ .parent_names = (const char *[]){
+ "gpll6_main"
+ },
+ .num_parents = 1,
+ .ops = &clk_fixed_factor_ops,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_alpha_pll ubi32_pll_main = {
+ .offset = 0x25000,
+ .clkr = {
+ .enable_reg = 0x0b000,
+ .enable_mask = BIT(6),
+ .hw.init = &(struct clk_init_data){
+ .name = "ubi32_pll_main",
+ .parent_names = (const char *[]){
+ "xo"
+ },
+ .num_parents = 1,
+ .ops = &clk_alpha_pll_ops,
+ },
+ },
+};
+
+static struct clk_alpha_pll_postdiv ubi32_pll = {
+ .offset = 0x25000,
+ .width = 2,
+ .clkr.hw.init = &(struct clk_init_data){
+ .name = "ubi32_pll",
+ .parent_names = (const char *[]){
+ "ubi32_pll_main"
+ },
+ .num_parents = 1,
+ .ops = &clk_alpha_pll_postdiv_ops,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_alpha_pll nss_crypto_pll_main = {
+ .offset = 0x22000,
+ .clkr = {
+ .enable_reg = 0x0b000,
+ .enable_mask = BIT(4),
+ .hw.init = &(struct clk_init_data){
+ .name = "nss_crypto_pll_main",
+ .parent_names = (const char *[]){
+ "xo"
+ },
+ .num_parents = 1,
+ .ops = &clk_alpha_pll_ops,
+ },
+ },
+};
+
+static struct clk_alpha_pll_postdiv nss_crypto_pll = {
+ .offset = 0x22000,
+ .width = 4,
+ .clkr.hw.init = &(struct clk_init_data){
+ .name = "nss_crypto_pll",
+ .parent_names = (const char *[]){
+ "nss_crypto_pll_main"
+ },
+ .num_parents = 1,
+ .ops = &clk_alpha_pll_postdiv_ops,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
static const struct freq_tbl ftbl_pcnoc_bfdcd_clk_src[] = {
F(19200000, P_XO, 1, 0, 0),
F(50000000, P_GPLL0, 16, 0, 0),
@@ -806,12 +973,23 @@ enum {
static struct clk_hw *gcc_ipq8074_hws[] = {
&gpll0_out_main_div2.hw,
+ &gpll6_out_main_div2.hw,
&pcnoc_clk_src.hw,
};
static struct clk_regmap *gcc_ipq8074_clks[] = {
[GPLL0_MAIN] = &gpll0_main.clkr,
[GPLL0] = &gpll0.clkr,
+ [GPLL2_MAIN] = &gpll2_main.clkr,
+ [GPLL2] = &gpll2.clkr,
+ [GPLL4_MAIN] = &gpll4_main.clkr,
+ [GPLL4] = &gpll4.clkr,
+ [GPLL6_MAIN] = &gpll6_main.clkr,
+ [GPLL6] = &gpll6.clkr,
+ [UBI32_PLL_MAIN] = &ubi32_pll_main.clkr,
+ [UBI32_PLL] = &ubi32_pll.clkr,
+ [NSS_CRYPTO_PLL_MAIN] = &nss_crypto_pll_main.clkr,
+ [NSS_CRYPTO_PLL] = &nss_crypto_pll.clkr,
[PCNOC_BFDCD_CLK_SRC] = &pcnoc_bfdcd_clk_src.clkr,
[GCC_SLEEP_CLK_SRC] = &gcc_sleep_clk_src.clkr,
[BLSP1_QUP1_I2C_APPS_CLK_SRC] = &blsp1_qup1_i2c_apps_clk_src.clkr,
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
next prev parent reply other threads:[~2017-09-26 12:23 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-09-26 12:23 [PATCH 00/11] Add remaining clocks for QCOM IPQ8074 Abhishek Sahu
2017-09-26 12:23 ` [PATCH 01/11] clk: qcom: add read-only divider operations Abhishek Sahu
2017-09-26 12:23 ` [PATCH 02/11] clk: qcom: add parent map for regmap mux Abhishek Sahu
2017-09-26 12:23 ` [PATCH 03/11] clk: qcom: ipq8074: fix missing GPLL0 divider width Abhishek Sahu
2017-09-26 12:23 ` [PATCH 04/11] dt-bindings: clock: qcom: add remaining clocks for IPQ8074 Abhishek Sahu
2017-11-28 15:24 ` Abhishek Sahu
2017-09-26 12:23 ` Abhishek Sahu [this message]
2017-09-26 12:23 ` [PATCH 06/11] clk: qcom: ipq8074: add PCIE, USB and SDCC clocks Abhishek Sahu
2017-09-26 12:24 ` [PATCH 07/11] clk: qcom: ipq8074: add NSS clocks Abhishek Sahu
2017-09-26 12:24 ` [PATCH 08/11] clk: qcom: ipq8074: add NSS ethernet port clocks Abhishek Sahu
2017-09-26 12:24 ` [PATCH 09/11] clk: qcom: ipq8074: add GP and Crypto clocks Abhishek Sahu
2017-09-26 12:24 ` [PATCH 10/11] dt-bindings: clock: qcom: add misc resets for PCIE and NSS Abhishek Sahu
2017-11-28 15:25 ` Abhishek Sahu
2017-09-26 12:24 ` [PATCH 11/11] clk: qcom: ipq8074: " Abhishek Sahu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1506428644-2996-6-git-send-email-absahu@codeaurora.org \
--to=absahu@codeaurora.org \
--cc=andy.gross@linaro.org \
--cc=david.brown@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-soc@vger.kernel.org \
--cc=mturquette@baylibre.com \
--cc=sboyd@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.