Patch "usb: renesas_usbhs: fix the BCLR setting condition for non-DCP pipe" has been added to the 4.4-stable tree

Patch "usb: renesas_usbhs: fix the BCLR setting condition for non-DCP pipe" has been added to the 4.4-stable tree

[gregkh]

This is a note to let you know that I've just added the patch titled

    usb: renesas_usbhs: fix the BCLR setting condition for non-DCP pipe

to the 4.4-stable tree which can be found at:
    http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
     usb-renesas_usbhs-fix-the-bclr-setting-condition-for-non-dcp-pipe.patch
and it can be found in the queue-4.4 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@vger.kernel.org> know about it.


>From 6124607acc88fffeaadf3aacfeb3cc1304c87387 Mon Sep 17 00:00:00 2001
From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Date: Wed, 27 Sep 2017 18:47:12 +0900
Subject: usb: renesas_usbhs: fix the BCLR setting condition for non-DCP pipe

From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>

commit 6124607acc88fffeaadf3aacfeb3cc1304c87387 upstream.

This patch fixes an issue that the driver sets the BCLR bit of
{C,Dn}FIFOCTR register to 1 even when it's non-DCP pipe and
the FRDY bit of {C,Dn}FIFOCTR register is set to 1.

Fixes: e8d548d54968 ("usb: renesas_usbhs: fifo became independent from pipe.")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/renesas_usbhs/fifo.c |   10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

--- a/drivers/usb/renesas_usbhs/fifo.c
+++ b/drivers/usb/renesas_usbhs/fifo.c
@@ -285,11 +285,17 @@ static void usbhsf_fifo_clear(struct usb
 			      struct usbhs_fifo *fifo)
 {
 	struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
+	int ret = 0;
 
 	if (!usbhs_pipe_is_dcp(pipe))
-		usbhsf_fifo_barrier(priv, fifo);
+		ret = usbhsf_fifo_barrier(priv, fifo);
 
-	usbhs_write(priv, fifo->ctr, BCLR);
+	/*
+	 * if non-DCP pipe, this driver should set BCLR when
+	 * usbhsf_fifo_barrier() returns 0.
+	 */
+	if (!ret)
+		usbhs_write(priv, fifo->ctr, BCLR);
 }
 
 static int usbhsf_fifo_rcv_len(struct usbhs_priv *priv,


Patches currently in stable-queue which might be from yoshihiro.shimoda.uh@renesas.com are

queue-4.4/usb-renesas_usbhs-fix-usbhsf_fifo_clear-for-rx-direction.patch
queue-4.4/usb-renesas_usbhs-fix-the-bclr-setting-condition-for-non-dcp-pipe.patch