From: Alexey.Brodkin@synopsys.com (Alexey Brodkin)
To: linux-snps-arc@lists.infradead.org
Subject: xf86-video-armada via UDL [was: Re: UDL's fbdev doesn't work for user-space apps]
Date: Mon, 4 Dec 2017 16:00:38 +0000 [thread overview]
Message-ID: <1512403237.4977.54.camel@synopsys.com> (raw)
In-Reply-To: <d89c088a-a169-b49a-c331-d1bfe4329e25@synopsys.com>
Hi Jose,
On Mon, 2017-12-04@15:55 +0000, Jose Abreu wrote:
> On 04-12-2017 14:53, Alexey Brodkin wrote:
> >
> > Full log you may find below.
>
> Sorry but I meant /var/log/Xorg.0.log file.
Ooops... sorry... here is it.
-Alexey
# cat /var/log/Xorg.0.log?
[????30.345]?
X.Org X Server 1.19.5
Release Date: 2017-10-12
[????30.345] X Protocol Version 11, Revision 0
[????30.345] Build Operating System: Linux 3.10.0-514.el7.x86_64 x86_64?
[????30.346] Current Operating System: Linux axs103 4.14.2-00008-g95be6f762b7f-dirty #68 SMP PREEMPT Mon Dec 4 16:12:46 MSK 2017 arc
[????30.346] Kernel command line: earlycon=uart8250,mmio32,0xf0005000,115200n8 console=ttyS0,115200n8 debug print-fatal-signals=1 drm.debug=0x1e
[????30.346] Build Date: 01 December 2017??12:21:28PM
[????30.346]??
[????30.346] Current version of pixman: 0.34.0
[????30.346]????Before reporting problems, check http://wiki.x.org
????????to make sure that you have the latest version.
[????30.346] Markers: (--) probed, (**) from config file, (==) default setting,
????????(++) from command line, (!!) notice, (II) informational,
????????(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[????30.346] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Jan??1 00:00:30 1970
[????30.346] (==) Using config file: "/etc/X11/xorg.conf"
[????30.346] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[????30.347] (==) No Layout section.??Using the first Screen section.
[????30.347] (==) No screen section available. Using defaults.
[????30.347] (**) |-->Screen "Default Screen Section" (0)
[????30.347] (**) |???|-->Monitor "<default monitor>"
[????30.348] (==) No device specified for screen "Default Screen Section".
????????Using the first device section listed.
[????30.348] (**) |???|-->Device "Driver0"
[????30.348] (==) No monitor specified for screen "Default Screen Section".
????????Using a default monitor configuration.
[????30.349] (==) Not automatically adding devices
[????30.349] (==) Not automatically enabling devices
[????30.349] (==) Not automatically adding GPU devices
[????30.349] (==) Max clients allowed: 256, resource mask: 0x1fffff
[????30.349] (WW) The directory "/usr/share/fonts/X11//TTF/" does not exist.
[????30.349]????Entry deleted from font path.
[????30.349] (WW) The directory "/usr/share/fonts/X11//OTF/" does not exist.
[????30.349]????Entry deleted from font path.
[????30.349] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/X11//100dpi/".
[????30.349]????Entry deleted from font path.
[????30.349]????(Run 'mkfontdir' on "/usr/share/fonts/X11//100dpi/").
[????30.349] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/X11//75dpi/".
[????30.349]????Entry deleted from font path.
[????30.350]????(Run 'mkfontdir' on "/usr/share/fonts/X11//75dpi/").
[????30.350] (==) FontPath set to:
????????/usr/share/fonts/X11//misc/,
????????/usr/share/fonts/X11//Type1/
[????30.350] (==) ModulePath set to "/usr/lib/xorg/modules"
[????30.350] (==) |-->Input Device "<default pointer>"
[????30.350] (==) |-->Input Device "<default keyboard>"
[????30.350] (==) No Layout section. Using the default mouse configuration.
[????30.350] (==) No Layout section. Using the default keyboard configuration.
[????30.350] (II) Loader magic: 0x178528
[????30.350] (II) Module ABI versions:
[????30.350]????X.Org ANSI C Emulation: 0.4
[????30.350]????X.Org Video Driver: 23.0
[????30.350]????X.Org XInput driver : 24.1
[????30.350]????X.Org Server Extension : 10.0
[????30.350] (II) LoadModule: "armada"
[????30.351] (II) Loading /usr/lib/xorg/modules/drivers/armada_drv.so
[????30.352] (II) Module armada: vendor="X.Org Foundation"
[????30.352]????compiled for 1.19.5, module version = 0.0.0
[????30.352]????Module class: X.Org Video Driver
[????30.352]????ABI class: X.Org Video Driver, version 23.0
[????30.352] (II) LoadModule: "mouse"
[????30.352] (II) Loading /usr/lib/xorg/modules/input/mouse_drv.so
[????30.353] (II) Module mouse: vendor="X.Org Foundation"
[????30.353]????compiled for 1.19.5, module version = 1.9.2
[????30.353]????Module class: X.Org XInput Driver
[????30.353]????ABI class: X.Org XInput driver, version 24.1
[????30.353] (II) LoadModule: "kbd"
[????30.353] (II) Loading /usr/lib/xorg/modules/input/kbd_drv.so
[????30.353] (II) Module kbd: vendor="X.Org Foundation"
[????30.353]????compiled for 1.19.5, module version = 1.9.0
[????30.354]????Module class: X.Org XInput Driver
[????30.354]????ABI class: X.Org XInput driver, version 24.1
[????30.354] (II) armada: Support for Marvell LCD Controller: 88AP510
[????30.354] (II) armada: Support for Freescale IPU: i.MX6
[????30.354] (II) armada: Support DisplayLink USB2.0: UDL
[????30.354] (--) using VT number 2
[????30.354] (WW) Falling back to old probe method for armada
[????30.357] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[????30.357] (II) armada(0): hardware: udl
[????30.357] (II) armada(0): Creating default Display subsection in Screen section
????????"Default Screen Section" for depth/fbbpp 24/32
[????30.357] (==) armada(0): Depth 24, (--) framebuffer bpp 32
[????30.357] (==) armada(0): RGB weight 888
[????30.357] (==) armada(0): Default visual is TrueColor
[????30.358] (**) armada(0): Option "XvAccel" "TRUE"
[????30.358] (**) armada(0): Option "XvPreferOverlay" "TRUE"
[????30.358] (**) armada(0): Option "UseGPU" "TRUE"
[????30.358] (**) armada(0): Option "AccelModule" "etnadrm_gpu"
[????30.358] (II) Loading sub module "etnadrm_gpu"
[????30.358] (II) LoadModule: "etnadrm_gpu"
[????30.358] (II) Loading /usr/lib/xorg/modules/drivers/etnadrm_gpu.so
[????30.359] (II) Module Etnaviv GPU driver (DRM): vendor="X.Org Foundation"
[????30.359]????compiled for 1.19.5, module version = 0.0.0
[????30.359]????ABI class: X.Org ANSI C Emulation, version 0.4
[????30.359] (**) armada(0): Option "DRI" "TRUE"
[????30.558] (II) armada(0): Output DVI1 has no monitor section
[????30.727] (II) armada(0): EDID for output DVI1
[????30.727] (II) armada(0): Manufacturer: DEL??Model: 4072??Serial#: 1110979404
[????30.727] (II) armada(0): Year: 2011??Week: 32
[????30.728] (II) armada(0): EDID Version: 1.3
[????30.728] (II) armada(0): Digital Display Input
[????30.728] (II) armada(0): Max Image Size [cm]: horiz.: 51??vert.: 29
[????30.728] (II) armada(0): Gamma: 2.20
[????30.728] (II) armada(0): DPMS capabilities: StandBy Suspend Off
[????30.728] (II) armada(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4?
[????30.728] (II) armada(0): First detailed timing is preferred mode
[????30.728] (II) armada(0): redX: 0.638 redY: 0.330???greenX: 0.312 greenY: 0.623
[????30.728] (II) armada(0): blueX: 0.150 blueY: 0.068???whiteX: 0.313 whiteY: 0.329
[????30.728] (II) armada(0): Supported established timings:
[????30.728] (II) armada(0): 720x400 at 70Hz
[????30.728] (II) armada(0): 640x480 at 60Hz
[????30.728] (II) armada(0): 640x480 at 75Hz
[????30.728] (II) armada(0): 800x600 at 60Hz
[????30.728] (II) armada(0): 800x600 at 75Hz
[????30.728] (II) armada(0): 1024x768 at 60Hz
[????30.729] (II) armada(0): 1024x768 at 75Hz
[????30.729] (II) armada(0): 1280x1024 at 75Hz
[????30.729] (II) armada(0): Manufacturer's mask: 0
[????30.729] (II) armada(0): Supported standard timings:
[????30.729] (II) armada(0): #0: hsize: 1152??vsize 864??refresh: 75??vid: 20337
[????30.729] (II) armada(0): #1: hsize: 1280??vsize 1024??refresh: 60??vid: 32897
[????30.729] (II) armada(0): #2: hsize: 1920??vsize 1080??refresh: 60??vid: 49361
[????30.729] (II) armada(0): Supported detailed timing:
[????30.729] (II) armada(0): clock: 148.5 MHz???Image Size:??510 x 287 mm
[????30.729] (II) armada(0): h_active: 1920??h_sync: 2008??h_sync_end 2052 h_blank_end 2200 h_border: 0
[????30.729] (II) armada(0): v_active: 1080??v_sync: 1084??v_sync_end 1089 v_blanking: 1125 v_border: 0
[????30.729] (II) armada(0): Serial No: 59DJP189B83L
[????30.729] (II) armada(0): Monitor name: DELL U2312HM
[????30.729] (II) armada(0): Ranges: V min: 56 V max: 76 Hz, H min: 30 H max: 83 kHz, PixClock max 175 MHz
[????30.729] (II) armada(0): EDID (in hex):
[????30.729] (II) armada(0):????00ffffffffffff0010ac72404c333842
[????30.729] (II) armada(0):????2015010380331d78ea6ea5a3544f9f26
[????30.730] (II) armada(0):????115054a54b00714f8180d1c001010101
[????30.730] (II) armada(0):????010101010101023a801871382d40582c
[????30.730] (II) armada(0):????4500fe1f1100001e000000ff00353944
[????30.730] (II) armada(0):????4a503138394238334c0a000000fc0044
[????30.730] (II) armada(0):????454c4c205532333132484d0a000000fd
[????30.730] (II) armada(0):????00384c1e5311000a2020202020200060
[????30.730] (II) armada(0): Printing probed modes for output DVI1
[????30.730] (II) armada(0): Modeline "1920x1080"x60.0??148.50??1920 2008 2052 2200??1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[????30.730] (II) armada(0): Modeline "1280x1024"x75.0??135.00??1280 1296 1440 1688??1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[????30.731] (II) armada(0): Modeline "1280x1024"x60.0??108.00??1280 1328 1440 1688??1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[????30.731] (II) armada(0): Modeline "1152x864"x75.0??108.00??1152 1216 1344 1600??864 865 868 900 +hsync +vsync (67.5 kHz e)
[????30.731] (II) armada(0): Modeline "1024x768"x75.0???78.75??1024 1040 1136 1312??768 769 772 800 +hsync +vsync (60.0 kHz e)
[????30.731] (II) armada(0): Modeline "1024x768"x60.0???65.00??1024 1048 1184 1344??768 771 777 806 -hsync -vsync (48.4 kHz e)
[????30.731] (II) armada(0): Modeline "800x600"x75.0???49.50??800 816 896 1056??600 601 604 625 +hsync +vsync (46.9 kHz e)
[????30.731] (II) armada(0): Modeline "800x600"x60.3???40.00??800 840 968 1056??600 601 605 628 +hsync +vsync (37.9 kHz e)
[????30.731] (II) armada(0): Modeline "640x480"x75.0???31.50??640 656 720 840??480 481 484 500 -hsync -vsync (37.5 kHz e)
[????30.731] (II) armada(0): Modeline "640x480"x59.9???25.18??640 656 752 800??480 490 492 525 -hsync -vsync (31.5 kHz e)
[????30.731] (II) armada(0): Modeline "720x400"x70.1???28.32??720 738 846 900??400 412 414 449 -hsync +vsync (31.5 kHz e)
[????30.731] (II) armada(0): Output DVI1 connected
[????30.731] (II) armada(0): Using exact sizes for initial modes
[????30.732] (II) armada(0): Output DVI1 using initial mode 1920x1080 +0+0
[????30.732] (==) armada(0): Using gamma correction (1.0, 1.0, 1.0)
[????30.732] (==) armada(0): DPI set to (96, 96)
[????30.732] (II) Loading sub module "fb"
[????30.732] (II) LoadModule: "fb"
[????30.732] (II) Loading /usr/lib/xorg/modules/libfb.so
[????30.734] (II) Module fb: vendor="X.Org Foundation"
[????30.734]????compiled for 1.19.5, module version = 1.0.0
[????30.734]????ABI class: X.Org ANSI C Emulation, version 0.4
[????30.734] (==) Depth 24 pixmap format is 32 bpp
[????30.757] (**) armada(0): Option "HWcursor" "TRUE"
[????30.757] (**) armada(0): Option "HotPlug" "TRUE"
[????30.758] (==) armada(0): Backing store enabled
[????30.758] (==) armada(0): Silken mouse enabled
[????30.758] (--) armada(0): Vivante GC880 GPU revision 5124 (etnaviv) 2d PE2.0
[????30.759] (II) armada(0): [DRI2] Setup complete
[????30.759] (II) armada(0): [DRI2]???DRI driver: etnaviv
[????30.759] (II) armada(0): direct rendering: DRI2 enabled
[????30.759] (II) armada(0): No hardware cursor support - disabling hardware cursors
[????30.759] (II) armada(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[????30.760] (==) armada(0): DPMS enabled
[????30.763] (II) armada(0): etnaviv: Xv: using YUY2 format intermediate YUV target
[????30.917] (--) RandR disabled
[????30.932] (II) armada(0): etnaviv: A8 target not supported
[????30.932] (II) armada(0): Setting screen physical size to 508 x 285
[????31.175] (II) Using input driver 'mouse' for '<default pointer>'
[????31.175] (**) Option "CorePointer" "on"
[????31.175] (**) <default pointer>: always reports core events
[????31.175] (WW) <default pointer>: No Device specified, looking for one...
[????31.175] (EE) <default pointer>: Cannot find which device to use.
[????31.175] (==) <default pointer>: Protocol: "Auto"
[????31.175] (**) <default pointer>: always reports core events
[????31.175] (EE) xf86OpenSerial: No Device specified.
[????31.176] (EE) <default pointer>: cannot open input device
[????31.176] (EE) PreInit returned 2 for "<default pointer>"
[????31.176] (II) UnloadModule: "mouse"
[????31.176] (II) Using input driver 'kbd' for '<default keyboard>'
[????31.176] (**) Option "CoreKeyboard" "on"
[????31.176] (**) <default keyboard>: always reports core events
[????31.176] (**) <default keyboard>: always reports core events
[????31.176] (**) Option "Protocol" "standard"
[????31.176] (**) Option "XkbRules" "base"
[????31.176] (**) Option "XkbModel" "pc105"
[????31.176] (**) Option "XkbLayout" "us"
[????31.176] (II) XINPUT: Adding extended input device "<default keyboard>" (type: KEYBOARD, id 6)
[????54.810] (II) UnloadModule: "kbd"
[????55.265] (--) armada(0): Vivante GC880 GPU revision 5124 (etnaviv) 2d PE2.0
[????55.265] (II) armada(0): [DRI2] Setup complete
[????55.265] (II) armada(0): [DRI2]???DRI driver: etnaviv
[????55.265] (II) armada(0): direct rendering: DRI2 enabled
[????55.266] (II) armada(0): No hardware cursor support - disabling hardware cursors
[????55.266] (II) armada(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[????55.266] (==) armada(0): DPMS enabled
[????55.269] (II) armada(0): etnaviv: Xv: using YUY2 format intermediate YUV target
[????55.410] (--) RandR disabled
[????55.425] (II) armada(0): etnaviv: A8 target not supported
[????55.425] (II) armada(0): Setting screen physical size to 508 x 285
[????55.648] (II) Using input driver 'mouse' for '<default pointer>'
[????55.648] (**) Option "CorePointer" "on"
[????55.648] (**) <default pointer>: always reports core events
[????55.649] (WW) <default pointer>: No Device specified, looking for one...
[????55.649] (EE) <default pointer>: Cannot find which device to use.
[????55.649] (==) <default pointer>: Protocol: "Auto"
[????55.649] (**) <default pointer>: always reports core events
[????55.649] (EE) xf86OpenSerial: No Device specified.
[????55.649] (EE) <default pointer>: cannot open input device
[????55.649] (EE) PreInit returned 2 for "<default pointer>"
[????55.649] (II) UnloadModule: "mouse"
[????55.649] (II) Using input driver 'kbd' for '<default keyboard>'
[????55.649] (**) Option "CoreKeyboard" "on"
[????55.649] (**) <default keyboard>: always reports core events
[????55.649] (**) <default keyboard>: always reports core events
[????55.649] (**) Option "Protocol" "standard"
[????55.649] (**) Option "XkbRules" "base"
[????55.650] (**) Option "XkbModel" "pc105"
[????55.650] (**) Option "XkbLayout" "us"
WARNING: multiple messages have this Message-ID (diff)
From: Alexey Brodkin <Alexey.Brodkin@synopsys.com>
To: "l.stach@pengutronix.de" <l.stach@pengutronix.de>,
Jose Abreu <Jose.Abreu@synopsys.com>
Cc: "dri-devel@lists.freedesktop.org"
<dri-devel@lists.freedesktop.org>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
"airlied@gmail.com" <airlied@gmail.com>,
"airlied@redhat.com" <airlied@redhat.com>,
"daniel.vetter@ffwll.ch" <daniel.vetter@ffwll.ch>,
"linux-snps-arc@lists.infradead.org"
<linux-snps-arc@lists.infradead.org>
Subject: Re: xf86-video-armada via UDL [was: Re: UDL's fbdev doesn't work for user-space apps]
Date: Mon, 4 Dec 2017 16:00:38 +0000 [thread overview]
Message-ID: <1512403237.4977.54.camel@synopsys.com> (raw)
In-Reply-To: <d89c088a-a169-b49a-c331-d1bfe4329e25@synopsys.com>
Hi Jose,
On Mon, 2017-12-04 at 15:55 +0000, Jose Abreu wrote:
> On 04-12-2017 14:53, Alexey Brodkin wrote:
> >
> > Full log you may find below.
>
> Sorry but I meant /var/log/Xorg.0.log file.
Ooops... sorry... here is it.
-Alexey
# cat /var/log/Xorg.0.log
[ 30.345]
X.Org X Server 1.19.5
Release Date: 2017-10-12
[ 30.345] X Protocol Version 11, Revision 0
[ 30.345] Build Operating System: Linux 3.10.0-514.el7.x86_64 x86_64
[ 30.346] Current Operating System: Linux axs103 4.14.2-00008-g95be6f762b7f-dirty #68 SMP PREEMPT Mon Dec 4 16:12:46 MSK 2017 arc
[ 30.346] Kernel command line: earlycon=uart8250,mmio32,0xf0005000,115200n8 console=ttyS0,115200n8 debug print-fatal-signals=1 drm.debug=0x1e
[ 30.346] Build Date: 01 December 2017 12:21:28PM
[ 30.346]
[ 30.346] Current version of pixman: 0.34.0
[ 30.346] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 30.346] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 30.346] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Jan 1 00:00:30 1970
[ 30.346] (==) Using config file: "/etc/X11/xorg.conf"
[ 30.346] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 30.347] (==) No Layout section. Using the first Screen section.
[ 30.347] (==) No screen section available. Using defaults.
[ 30.347] (**) |-->Screen "Default Screen Section" (0)
[ 30.347] (**) | |-->Monitor "<default monitor>"
[ 30.348] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 30.348] (**) | |-->Device "Driver0"
[ 30.348] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 30.349] (==) Not automatically adding devices
[ 30.349] (==) Not automatically enabling devices
[ 30.349] (==) Not automatically adding GPU devices
[ 30.349] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 30.349] (WW) The directory "/usr/share/fonts/X11//TTF/" does not exist.
[ 30.349] Entry deleted from font path.
[ 30.349] (WW) The directory "/usr/share/fonts/X11//OTF/" does not exist.
[ 30.349] Entry deleted from font path.
[ 30.349] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/X11//100dpi/".
[ 30.349] Entry deleted from font path.
[ 30.349] (Run 'mkfontdir' on "/usr/share/fonts/X11//100dpi/").
[ 30.349] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/X11//75dpi/".
[ 30.349] Entry deleted from font path.
[ 30.350] (Run 'mkfontdir' on "/usr/share/fonts/X11//75dpi/").
[ 30.350] (==) FontPath set to:
/usr/share/fonts/X11//misc/,
/usr/share/fonts/X11//Type1/
[ 30.350] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 30.350] (==) |-->Input Device "<default pointer>"
[ 30.350] (==) |-->Input Device "<default keyboard>"
[ 30.350] (==) No Layout section. Using the default mouse configuration.
[ 30.350] (==) No Layout section. Using the default keyboard configuration.
[ 30.350] (II) Loader magic: 0x178528
[ 30.350] (II) Module ABI versions:
[ 30.350] X.Org ANSI C Emulation: 0.4
[ 30.350] X.Org Video Driver: 23.0
[ 30.350] X.Org XInput driver : 24.1
[ 30.350] X.Org Server Extension : 10.0
[ 30.350] (II) LoadModule: "armada"
[ 30.351] (II) Loading /usr/lib/xorg/modules/drivers/armada_drv.so
[ 30.352] (II) Module armada: vendor="X.Org Foundation"
[ 30.352] compiled for 1.19.5, module version = 0.0.0
[ 30.352] Module class: X.Org Video Driver
[ 30.352] ABI class: X.Org Video Driver, version 23.0
[ 30.352] (II) LoadModule: "mouse"
[ 30.352] (II) Loading /usr/lib/xorg/modules/input/mouse_drv.so
[ 30.353] (II) Module mouse: vendor="X.Org Foundation"
[ 30.353] compiled for 1.19.5, module version = 1.9.2
[ 30.353] Module class: X.Org XInput Driver
[ 30.353] ABI class: X.Org XInput driver, version 24.1
[ 30.353] (II) LoadModule: "kbd"
[ 30.353] (II) Loading /usr/lib/xorg/modules/input/kbd_drv.so
[ 30.353] (II) Module kbd: vendor="X.Org Foundation"
[ 30.353] compiled for 1.19.5, module version = 1.9.0
[ 30.354] Module class: X.Org XInput Driver
[ 30.354] ABI class: X.Org XInput driver, version 24.1
[ 30.354] (II) armada: Support for Marvell LCD Controller: 88AP510
[ 30.354] (II) armada: Support for Freescale IPU: i.MX6
[ 30.354] (II) armada: Support DisplayLink USB2.0: UDL
[ 30.354] (--) using VT number 2
[ 30.354] (WW) Falling back to old probe method for armada
[ 30.357] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[ 30.357] (II) armada(0): hardware: udl
[ 30.357] (II) armada(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 30.357] (==) armada(0): Depth 24, (--) framebuffer bpp 32
[ 30.357] (==) armada(0): RGB weight 888
[ 30.357] (==) armada(0): Default visual is TrueColor
[ 30.358] (**) armada(0): Option "XvAccel" "TRUE"
[ 30.358] (**) armada(0): Option "XvPreferOverlay" "TRUE"
[ 30.358] (**) armada(0): Option "UseGPU" "TRUE"
[ 30.358] (**) armada(0): Option "AccelModule" "etnadrm_gpu"
[ 30.358] (II) Loading sub module "etnadrm_gpu"
[ 30.358] (II) LoadModule: "etnadrm_gpu"
[ 30.358] (II) Loading /usr/lib/xorg/modules/drivers/etnadrm_gpu.so
[ 30.359] (II) Module Etnaviv GPU driver (DRM): vendor="X.Org Foundation"
[ 30.359] compiled for 1.19.5, module version = 0.0.0
[ 30.359] ABI class: X.Org ANSI C Emulation, version 0.4
[ 30.359] (**) armada(0): Option "DRI" "TRUE"
[ 30.558] (II) armada(0): Output DVI1 has no monitor section
[ 30.727] (II) armada(0): EDID for output DVI1
[ 30.727] (II) armada(0): Manufacturer: DEL Model: 4072 Serial#: 1110979404
[ 30.727] (II) armada(0): Year: 2011 Week: 32
[ 30.728] (II) armada(0): EDID Version: 1.3
[ 30.728] (II) armada(0): Digital Display Input
[ 30.728] (II) armada(0): Max Image Size [cm]: horiz.: 51 vert.: 29
[ 30.728] (II) armada(0): Gamma: 2.20
[ 30.728] (II) armada(0): DPMS capabilities: StandBy Suspend Off
[ 30.728] (II) armada(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 30.728] (II) armada(0): First detailed timing is preferred mode
[ 30.728] (II) armada(0): redX: 0.638 redY: 0.330 greenX: 0.312 greenY: 0.623
[ 30.728] (II) armada(0): blueX: 0.150 blueY: 0.068 whiteX: 0.313 whiteY: 0.329
[ 30.728] (II) armada(0): Supported established timings:
[ 30.728] (II) armada(0): 720x400@70Hz
[ 30.728] (II) armada(0): 640x480@60Hz
[ 30.728] (II) armada(0): 640x480@75Hz
[ 30.728] (II) armada(0): 800x600@60Hz
[ 30.728] (II) armada(0): 800x600@75Hz
[ 30.728] (II) armada(0): 1024x768@60Hz
[ 30.729] (II) armada(0): 1024x768@75Hz
[ 30.729] (II) armada(0): 1280x1024@75Hz
[ 30.729] (II) armada(0): Manufacturer's mask: 0
[ 30.729] (II) armada(0): Supported standard timings:
[ 30.729] (II) armada(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 30.729] (II) armada(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 30.729] (II) armada(0): #2: hsize: 1920 vsize 1080 refresh: 60 vid: 49361
[ 30.729] (II) armada(0): Supported detailed timing:
[ 30.729] (II) armada(0): clock: 148.5 MHz Image Size: 510 x 287 mm
[ 30.729] (II) armada(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
[ 30.729] (II) armada(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
[ 30.729] (II) armada(0): Serial No: 59DJP189B83L
[ 30.729] (II) armada(0): Monitor name: DELL U2312HM
[ 30.729] (II) armada(0): Ranges: V min: 56 V max: 76 Hz, H min: 30 H max: 83 kHz, PixClock max 175 MHz
[ 30.729] (II) armada(0): EDID (in hex):
[ 30.729] (II) armada(0): 00ffffffffffff0010ac72404c333842
[ 30.729] (II) armada(0): 2015010380331d78ea6ea5a3544f9f26
[ 30.730] (II) armada(0): 115054a54b00714f8180d1c001010101
[ 30.730] (II) armada(0): 010101010101023a801871382d40582c
[ 30.730] (II) armada(0): 4500fe1f1100001e000000ff00353944
[ 30.730] (II) armada(0): 4a503138394238334c0a000000fc0044
[ 30.730] (II) armada(0): 454c4c205532333132484d0a000000fd
[ 30.730] (II) armada(0): 00384c1e5311000a2020202020200060
[ 30.730] (II) armada(0): Printing probed modes for output DVI1
[ 30.730] (II) armada(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[ 30.730] (II) armada(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 30.731] (II) armada(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 30.731] (II) armada(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 30.731] (II) armada(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 30.731] (II) armada(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 30.731] (II) armada(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 30.731] (II) armada(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 30.731] (II) armada(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 30.731] (II) armada(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 30.731] (II) armada(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 30.731] (II) armada(0): Output DVI1 connected
[ 30.731] (II) armada(0): Using exact sizes for initial modes
[ 30.732] (II) armada(0): Output DVI1 using initial mode 1920x1080 +0+0
[ 30.732] (==) armada(0): Using gamma correction (1.0, 1.0, 1.0)
[ 30.732] (==) armada(0): DPI set to (96, 96)
[ 30.732] (II) Loading sub module "fb"
[ 30.732] (II) LoadModule: "fb"
[ 30.732] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 30.734] (II) Module fb: vendor="X.Org Foundation"
[ 30.734] compiled for 1.19.5, module version = 1.0.0
[ 30.734] ABI class: X.Org ANSI C Emulation, version 0.4
[ 30.734] (==) Depth 24 pixmap format is 32 bpp
[ 30.757] (**) armada(0): Option "HWcursor" "TRUE"
[ 30.757] (**) armada(0): Option "HotPlug" "TRUE"
[ 30.758] (==) armada(0): Backing store enabled
[ 30.758] (==) armada(0): Silken mouse enabled
[ 30.758] (--) armada(0): Vivante GC880 GPU revision 5124 (etnaviv) 2d PE2.0
[ 30.759] (II) armada(0): [DRI2] Setup complete
[ 30.759] (II) armada(0): [DRI2] DRI driver: etnaviv
[ 30.759] (II) armada(0): direct rendering: DRI2 enabled
[ 30.759] (II) armada(0): No hardware cursor support - disabling hardware cursors
[ 30.759] (II) armada(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 30.760] (==) armada(0): DPMS enabled
[ 30.763] (II) armada(0): etnaviv: Xv: using YUY2 format intermediate YUV target
[ 30.917] (--) RandR disabled
[ 30.932] (II) armada(0): etnaviv: A8 target not supported
[ 30.932] (II) armada(0): Setting screen physical size to 508 x 285
[ 31.175] (II) Using input driver 'mouse' for '<default pointer>'
[ 31.175] (**) Option "CorePointer" "on"
[ 31.175] (**) <default pointer>: always reports core events
[ 31.175] (WW) <default pointer>: No Device specified, looking for one...
[ 31.175] (EE) <default pointer>: Cannot find which device to use.
[ 31.175] (==) <default pointer>: Protocol: "Auto"
[ 31.175] (**) <default pointer>: always reports core events
[ 31.175] (EE) xf86OpenSerial: No Device specified.
[ 31.176] (EE) <default pointer>: cannot open input device
[ 31.176] (EE) PreInit returned 2 for "<default pointer>"
[ 31.176] (II) UnloadModule: "mouse"
[ 31.176] (II) Using input driver 'kbd' for '<default keyboard>'
[ 31.176] (**) Option "CoreKeyboard" "on"
[ 31.176] (**) <default keyboard>: always reports core events
[ 31.176] (**) <default keyboard>: always reports core events
[ 31.176] (**) Option "Protocol" "standard"
[ 31.176] (**) Option "XkbRules" "base"
[ 31.176] (**) Option "XkbModel" "pc105"
[ 31.176] (**) Option "XkbLayout" "us"
[ 31.176] (II) XINPUT: Adding extended input device "<default keyboard>" (type: KEYBOARD, id 6)
[ 54.810] (II) UnloadModule: "kbd"
[ 55.265] (--) armada(0): Vivante GC880 GPU revision 5124 (etnaviv) 2d PE2.0
[ 55.265] (II) armada(0): [DRI2] Setup complete
[ 55.265] (II) armada(0): [DRI2] DRI driver: etnaviv
[ 55.265] (II) armada(0): direct rendering: DRI2 enabled
[ 55.266] (II) armada(0): No hardware cursor support - disabling hardware cursors
[ 55.266] (II) armada(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 55.266] (==) armada(0): DPMS enabled
[ 55.269] (II) armada(0): etnaviv: Xv: using YUY2 format intermediate YUV target
[ 55.410] (--) RandR disabled
[ 55.425] (II) armada(0): etnaviv: A8 target not supported
[ 55.425] (II) armada(0): Setting screen physical size to 508 x 285
[ 55.648] (II) Using input driver 'mouse' for '<default pointer>'
[ 55.648] (**) Option "CorePointer" "on"
[ 55.648] (**) <default pointer>: always reports core events
[ 55.649] (WW) <default pointer>: No Device specified, looking for one...
[ 55.649] (EE) <default pointer>: Cannot find which device to use.
[ 55.649] (==) <default pointer>: Protocol: "Auto"
[ 55.649] (**) <default pointer>: always reports core events
[ 55.649] (EE) xf86OpenSerial: No Device specified.
[ 55.649] (EE) <default pointer>: cannot open input device
[ 55.649] (EE) PreInit returned 2 for "<default pointer>"
[ 55.649] (II) UnloadModule: "mouse"
[ 55.649] (II) Using input driver 'kbd' for '<default keyboard>'
[ 55.649] (**) Option "CoreKeyboard" "on"
[ 55.649] (**) <default keyboard>: always reports core events
[ 55.649] (**) <default keyboard>: always reports core events
[ 55.649] (**) Option "Protocol" "standard"
[ 55.649] (**) Option "XkbRules" "base"
[ 55.650] (**) Option "XkbModel" "pc105"
[ 55.650] (**) Option "XkbLayout" "us"
next prev parent reply other threads:[~2017-12-04 16:00 UTC|newest]
Thread overview: 48+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-12-04 11:32 UDL's fbdev doesn't work for user-space apps Alexey Brodkin
2017-12-04 11:32 ` Alexey Brodkin
2017-12-04 11:50 ` Jose Abreu
2017-12-04 11:50 ` Jose Abreu
2017-12-04 11:50 ` Jose Abreu
2017-12-04 13:16 ` xf86-video-armada via UDL [was: Re: UDL's fbdev doesn't work for user-space apps] Alexey Brodkin
2017-12-04 13:16 ` Alexey Brodkin
2017-12-04 14:02 ` Jose Abreu
2017-12-04 14:02 ` Jose Abreu
2017-12-04 14:02 ` Jose Abreu
2017-12-04 14:53 ` Alexey Brodkin
2017-12-04 14:53 ` Alexey Brodkin
2017-12-04 15:55 ` Jose Abreu
2017-12-04 15:55 ` Jose Abreu
2017-12-04 15:55 ` Jose Abreu
2017-12-04 16:00 ` Alexey Brodkin [this message]
2017-12-04 16:00 ` Alexey Brodkin
2017-12-04 17:24 ` Jose Abreu
2017-12-04 17:24 ` Jose Abreu
2017-12-04 17:29 ` Alexey Brodkin
2017-12-04 17:29 ` Alexey Brodkin
2017-12-05 10:39 ` Jose Abreu
2017-12-05 10:39 ` Jose Abreu
2017-12-05 10:39 ` Jose Abreu
2017-12-05 11:53 ` Alexey Brodkin
2017-12-05 11:53 ` Alexey Brodkin
2017-12-05 11:53 ` Alexey Brodkin
2017-12-05 12:26 ` Jose Abreu
2017-12-05 12:26 ` Jose Abreu
2017-12-05 12:26 ` Jose Abreu
2017-12-05 14:47 ` Alexey Brodkin
2017-12-05 14:47 ` Alexey Brodkin
2017-12-04 17:52 ` Emil Velikov
2017-12-04 17:52 ` Emil Velikov
2017-12-04 17:52 ` Emil Velikov
2017-12-09 17:20 ` UDL's fbdev doesn't work for user-space apps Pavel Machek
2017-12-09 17:20 ` Pavel Machek
2017-12-09 17:20 ` Pavel Machek
2017-12-12 19:48 ` Alexey Brodkin
2017-12-12 19:48 ` Alexey Brodkin
2017-12-12 21:12 ` Pavel Machek
2017-12-12 21:12 ` Pavel Machek
2017-12-12 21:12 ` Pavel Machek
2017-12-12 21:58 ` Noralf Trønnes
2017-12-12 21:58 ` Noralf Trønnes
2017-12-12 21:58 ` Noralf Trønnes
2017-12-13 21:53 ` Alexey Brodkin
2017-12-13 21:53 ` Alexey Brodkin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1512403237.4977.54.camel@synopsys.com \
--to=alexey.brodkin@synopsys.com \
--cc=linux-snps-arc@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.