From: Sricharan R <sricharan@codeaurora.org>
To: mturquette@baylibre.com, sboyd@codeaurora.org,
devicetree@vger.kernel.org, linux-pm@vger.kernel.org,
linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org,
viresh.kumar@linaro.org, linux-arm-kernel@lists.infradead.org
Cc: sricharan@codeaurora.org
Subject: [PATCH v4 03/12] clk: qcom: Add support for High-Frequency PLLs (HFPLLs)
Date: Fri, 8 Dec 2017 15:12:21 +0530 [thread overview]
Message-ID: <1512726150-7204-4-git-send-email-sricharan@codeaurora.org> (raw)
In-Reply-To: <1512726150-7204-1-git-send-email-sricharan@codeaurora.org>
From: Stephen Boyd <sboyd@codeaurora.org>
HFPLLs are the main frequency source for Krait CPU clocks. Add
support for changing the rate of these PLLs.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
---
drivers/clk/qcom/Makefile | 1 +
drivers/clk/qcom/clk-hfpll.c | 253 +++++++++++++++++++++++++++++++++++++++++++
drivers/clk/qcom/clk-hfpll.h | 54 +++++++++
3 files changed, 308 insertions(+)
create mode 100644 drivers/clk/qcom/clk-hfpll.c
create mode 100644 drivers/clk/qcom/clk-hfpll.h
diff --git a/drivers/clk/qcom/Makefile b/drivers/clk/qcom/Makefile
index 602af38..4795e21 100644
--- a/drivers/clk/qcom/Makefile
+++ b/drivers/clk/qcom/Makefile
@@ -10,6 +10,7 @@ clk-qcom-y += clk-rcg2.o
clk-qcom-y += clk-branch.o
clk-qcom-y += clk-regmap-divider.o
clk-qcom-y += clk-regmap-mux.o
+clk-qcom-y += clk-hfpll.o
clk-qcom-y += reset.o
clk-qcom-$(CONFIG_QCOM_GDSC) += gdsc.o
diff --git a/drivers/clk/qcom/clk-hfpll.c b/drivers/clk/qcom/clk-hfpll.c
new file mode 100644
index 0000000..5b0bb71
--- /dev/null
+++ b/drivers/clk/qcom/clk-hfpll.c
@@ -0,0 +1,253 @@
+/*
+ * Copyright (c) 2013-2014, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#include <linux/kernel.h>
+#include <linux/export.h>
+#include <linux/regmap.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/clk-provider.h>
+#include <linux/spinlock.h>
+
+#include "clk-regmap.h"
+#include "clk-hfpll.h"
+
+#define PLL_OUTCTRL BIT(0)
+#define PLL_BYPASSNL BIT(1)
+#define PLL_RESET_N BIT(2)
+
+/* Initialize a HFPLL at a given rate and enable it. */
+static void __clk_hfpll_init_once(struct clk_hw *hw)
+{
+ struct clk_hfpll *h = to_clk_hfpll(hw);
+ struct hfpll_data const *hd = h->d;
+ struct regmap *regmap = h->clkr.regmap;
+
+ if (likely(h->init_done))
+ return;
+
+ /* Configure PLL parameters for integer mode. */
+ if (hd->config_val)
+ regmap_write(regmap, hd->config_reg, hd->config_val);
+ regmap_write(regmap, hd->m_reg, 0);
+ regmap_write(regmap, hd->n_reg, 1);
+
+ if (hd->user_reg) {
+ u32 regval = hd->user_val;
+ unsigned long rate;
+
+ rate = clk_hw_get_rate(hw);
+
+ /* Pick the right VCO. */
+ if (hd->user_vco_mask && rate > hd->low_vco_max_rate)
+ regval |= hd->user_vco_mask;
+ regmap_write(regmap, hd->user_reg, regval);
+ }
+
+ if (hd->droop_reg)
+ regmap_write(regmap, hd->droop_reg, hd->droop_val);
+
+ h->init_done = true;
+}
+
+static void __clk_hfpll_enable(struct clk_hw *hw)
+{
+ struct clk_hfpll *h = to_clk_hfpll(hw);
+ struct hfpll_data const *hd = h->d;
+ struct regmap *regmap = h->clkr.regmap;
+ u32 val;
+
+ __clk_hfpll_init_once(hw);
+
+ /* Disable PLL bypass mode. */
+ regmap_update_bits(regmap, hd->mode_reg, PLL_BYPASSNL, PLL_BYPASSNL);
+
+ /*
+ * H/W requires a 5us delay between disabling the bypass and
+ * de-asserting the reset. Delay 10us just to be safe.
+ */
+ usleep_range(10, 100);
+
+ /* De-assert active-low PLL reset. */
+ regmap_update_bits(regmap, hd->mode_reg, PLL_RESET_N, PLL_RESET_N);
+
+ /* Wait for PLL to lock. */
+ if (hd->status_reg) {
+ do {
+ regmap_read(regmap, hd->status_reg, &val);
+ } while (!(val & BIT(hd->lock_bit)));
+ } else {
+ usleep_range(60, 100);
+ }
+
+ /* Enable PLL output. */
+ regmap_update_bits(regmap, hd->mode_reg, PLL_OUTCTRL, PLL_OUTCTRL);
+}
+
+/* Enable an already-configured HFPLL. */
+static int clk_hfpll_enable(struct clk_hw *hw)
+{
+ unsigned long flags;
+ struct clk_hfpll *h = to_clk_hfpll(hw);
+ struct hfpll_data const *hd = h->d;
+ struct regmap *regmap = h->clkr.regmap;
+ u32 mode;
+
+ spin_lock_irqsave(&h->lock, flags);
+ regmap_read(regmap, hd->mode_reg, &mode);
+ if (!(mode & (PLL_BYPASSNL | PLL_RESET_N | PLL_OUTCTRL)))
+ __clk_hfpll_enable(hw);
+ spin_unlock_irqrestore(&h->lock, flags);
+
+ return 0;
+}
+
+static void __clk_hfpll_disable(struct clk_hfpll *h)
+{
+ struct hfpll_data const *hd = h->d;
+ struct regmap *regmap = h->clkr.regmap;
+
+ /*
+ * Disable the PLL output, disable test mode, enable the bypass mode,
+ * and assert the reset.
+ */
+ regmap_update_bits(regmap, hd->mode_reg,
+ PLL_BYPASSNL | PLL_RESET_N | PLL_OUTCTRL, 0);
+}
+
+static void clk_hfpll_disable(struct clk_hw *hw)
+{
+ struct clk_hfpll *h = to_clk_hfpll(hw);
+ unsigned long flags;
+
+ spin_lock_irqsave(&h->lock, flags);
+ __clk_hfpll_disable(h);
+ spin_unlock_irqrestore(&h->lock, flags);
+}
+
+static long clk_hfpll_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *parent_rate)
+{
+ struct clk_hfpll *h = to_clk_hfpll(hw);
+ struct hfpll_data const *hd = h->d;
+ unsigned long rrate;
+
+ rate = clamp(rate, hd->min_rate, hd->max_rate);
+
+ rrate = DIV_ROUND_UP(rate, *parent_rate) * *parent_rate;
+ if (rrate > hd->max_rate)
+ rrate -= *parent_rate;
+
+ return rrate;
+}
+
+/*
+ * For optimization reasons, assumes no downstream clocks are actively using
+ * it.
+ */
+static int clk_hfpll_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct clk_hfpll *h = to_clk_hfpll(hw);
+ struct hfpll_data const *hd = h->d;
+ struct regmap *regmap = h->clkr.regmap;
+ unsigned long flags;
+ u32 l_val, val;
+ bool enabled;
+
+ l_val = rate / parent_rate;
+
+ spin_lock_irqsave(&h->lock, flags);
+
+ enabled = __clk_is_enabled(hw->clk);
+ if (enabled)
+ __clk_hfpll_disable(h);
+
+ /* Pick the right VCO. */
+ if (hd->user_reg && hd->user_vco_mask) {
+ regmap_read(regmap, hd->user_reg, &val);
+ if (rate <= hd->low_vco_max_rate)
+ val &= ~hd->user_vco_mask;
+ else
+ val |= hd->user_vco_mask;
+ regmap_write(regmap, hd->user_reg, val);
+ }
+
+ regmap_write(regmap, hd->l_reg, l_val);
+
+ if (enabled)
+ __clk_hfpll_enable(hw);
+
+ spin_unlock_irqrestore(&h->lock, flags);
+
+ return 0;
+}
+
+static unsigned long clk_hfpll_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct clk_hfpll *h = to_clk_hfpll(hw);
+ struct hfpll_data const *hd = h->d;
+ struct regmap *regmap = h->clkr.regmap;
+ u32 l_val;
+
+ regmap_read(regmap, hd->l_reg, &l_val);
+
+ return l_val * parent_rate;
+}
+
+static void clk_hfpll_init(struct clk_hw *hw)
+{
+ struct clk_hfpll *h = to_clk_hfpll(hw);
+ struct hfpll_data const *hd = h->d;
+ struct regmap *regmap = h->clkr.regmap;
+ u32 mode, status;
+
+ regmap_read(regmap, hd->mode_reg, &mode);
+ if (mode != (PLL_BYPASSNL | PLL_RESET_N | PLL_OUTCTRL)) {
+ __clk_hfpll_init_once(hw);
+ return;
+ }
+
+ if (hd->status_reg) {
+ regmap_read(regmap, hd->status_reg, &status);
+ if (!(status & BIT(hd->lock_bit))) {
+ WARN(1, "HFPLL %s is ON, but not locked!\n",
+ __clk_get_name(hw->clk));
+ clk_hfpll_disable(hw);
+ __clk_hfpll_init_once(hw);
+ }
+ }
+}
+
+static int hfpll_is_enabled(struct clk_hw *hw)
+{
+ struct clk_hfpll *h = to_clk_hfpll(hw);
+ struct hfpll_data const *hd = h->d;
+ struct regmap *regmap = h->clkr.regmap;
+ u32 mode;
+
+ regmap_read(regmap, hd->mode_reg, &mode);
+ mode &= 0x7;
+ return mode == (PLL_BYPASSNL | PLL_RESET_N | PLL_OUTCTRL);
+}
+
+const struct clk_ops clk_ops_hfpll = {
+ .enable = clk_hfpll_enable,
+ .disable = clk_hfpll_disable,
+ .is_enabled = hfpll_is_enabled,
+ .round_rate = clk_hfpll_round_rate,
+ .set_rate = clk_hfpll_set_rate,
+ .recalc_rate = clk_hfpll_recalc_rate,
+ .init = clk_hfpll_init,
+};
+EXPORT_SYMBOL_GPL(clk_ops_hfpll);
diff --git a/drivers/clk/qcom/clk-hfpll.h b/drivers/clk/qcom/clk-hfpll.h
new file mode 100644
index 0000000..48c18d6
--- /dev/null
+++ b/drivers/clk/qcom/clk-hfpll.h
@@ -0,0 +1,54 @@
+/*
+ * Copyright (c) 2013-2014, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#ifndef __QCOM_CLK_HFPLL_H__
+#define __QCOM_CLK_HFPLL_H__
+
+#include <linux/clk-provider.h>
+#include <linux/spinlock.h>
+#include "clk-regmap.h"
+
+struct hfpll_data {
+ u32 mode_reg;
+ u32 l_reg;
+ u32 m_reg;
+ u32 n_reg;
+ u32 user_reg;
+ u32 droop_reg;
+ u32 config_reg;
+ u32 status_reg;
+ u8 lock_bit;
+
+ u32 droop_val;
+ u32 config_val;
+ u32 user_val;
+ u32 user_vco_mask;
+ unsigned long low_vco_max_rate;
+
+ unsigned long min_rate;
+ unsigned long max_rate;
+};
+
+struct clk_hfpll {
+ struct hfpll_data const *d;
+ int init_done;
+
+ struct clk_regmap clkr;
+ spinlock_t lock;
+};
+
+#define to_clk_hfpll(_hw) \
+ container_of(to_clk_regmap(_hw), struct clk_hfpll, clkr)
+
+extern const struct clk_ops clk_ops_hfpll;
+
+#endif
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
WARNING: multiple messages have this Message-ID (diff)
From: sricharan@codeaurora.org (Sricharan R)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v4 03/12] clk: qcom: Add support for High-Frequency PLLs (HFPLLs)
Date: Fri, 8 Dec 2017 15:12:21 +0530 [thread overview]
Message-ID: <1512726150-7204-4-git-send-email-sricharan@codeaurora.org> (raw)
In-Reply-To: <1512726150-7204-1-git-send-email-sricharan@codeaurora.org>
From: Stephen Boyd <sboyd@codeaurora.org>
HFPLLs are the main frequency source for Krait CPU clocks. Add
support for changing the rate of these PLLs.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
---
drivers/clk/qcom/Makefile | 1 +
drivers/clk/qcom/clk-hfpll.c | 253 +++++++++++++++++++++++++++++++++++++++++++
drivers/clk/qcom/clk-hfpll.h | 54 +++++++++
3 files changed, 308 insertions(+)
create mode 100644 drivers/clk/qcom/clk-hfpll.c
create mode 100644 drivers/clk/qcom/clk-hfpll.h
diff --git a/drivers/clk/qcom/Makefile b/drivers/clk/qcom/Makefile
index 602af38..4795e21 100644
--- a/drivers/clk/qcom/Makefile
+++ b/drivers/clk/qcom/Makefile
@@ -10,6 +10,7 @@ clk-qcom-y += clk-rcg2.o
clk-qcom-y += clk-branch.o
clk-qcom-y += clk-regmap-divider.o
clk-qcom-y += clk-regmap-mux.o
+clk-qcom-y += clk-hfpll.o
clk-qcom-y += reset.o
clk-qcom-$(CONFIG_QCOM_GDSC) += gdsc.o
diff --git a/drivers/clk/qcom/clk-hfpll.c b/drivers/clk/qcom/clk-hfpll.c
new file mode 100644
index 0000000..5b0bb71
--- /dev/null
+++ b/drivers/clk/qcom/clk-hfpll.c
@@ -0,0 +1,253 @@
+/*
+ * Copyright (c) 2013-2014, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#include <linux/kernel.h>
+#include <linux/export.h>
+#include <linux/regmap.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/clk-provider.h>
+#include <linux/spinlock.h>
+
+#include "clk-regmap.h"
+#include "clk-hfpll.h"
+
+#define PLL_OUTCTRL BIT(0)
+#define PLL_BYPASSNL BIT(1)
+#define PLL_RESET_N BIT(2)
+
+/* Initialize a HFPLL at a given rate and enable it. */
+static void __clk_hfpll_init_once(struct clk_hw *hw)
+{
+ struct clk_hfpll *h = to_clk_hfpll(hw);
+ struct hfpll_data const *hd = h->d;
+ struct regmap *regmap = h->clkr.regmap;
+
+ if (likely(h->init_done))
+ return;
+
+ /* Configure PLL parameters for integer mode. */
+ if (hd->config_val)
+ regmap_write(regmap, hd->config_reg, hd->config_val);
+ regmap_write(regmap, hd->m_reg, 0);
+ regmap_write(regmap, hd->n_reg, 1);
+
+ if (hd->user_reg) {
+ u32 regval = hd->user_val;
+ unsigned long rate;
+
+ rate = clk_hw_get_rate(hw);
+
+ /* Pick the right VCO. */
+ if (hd->user_vco_mask && rate > hd->low_vco_max_rate)
+ regval |= hd->user_vco_mask;
+ regmap_write(regmap, hd->user_reg, regval);
+ }
+
+ if (hd->droop_reg)
+ regmap_write(regmap, hd->droop_reg, hd->droop_val);
+
+ h->init_done = true;
+}
+
+static void __clk_hfpll_enable(struct clk_hw *hw)
+{
+ struct clk_hfpll *h = to_clk_hfpll(hw);
+ struct hfpll_data const *hd = h->d;
+ struct regmap *regmap = h->clkr.regmap;
+ u32 val;
+
+ __clk_hfpll_init_once(hw);
+
+ /* Disable PLL bypass mode. */
+ regmap_update_bits(regmap, hd->mode_reg, PLL_BYPASSNL, PLL_BYPASSNL);
+
+ /*
+ * H/W requires a 5us delay between disabling the bypass and
+ * de-asserting the reset. Delay 10us just to be safe.
+ */
+ usleep_range(10, 100);
+
+ /* De-assert active-low PLL reset. */
+ regmap_update_bits(regmap, hd->mode_reg, PLL_RESET_N, PLL_RESET_N);
+
+ /* Wait for PLL to lock. */
+ if (hd->status_reg) {
+ do {
+ regmap_read(regmap, hd->status_reg, &val);
+ } while (!(val & BIT(hd->lock_bit)));
+ } else {
+ usleep_range(60, 100);
+ }
+
+ /* Enable PLL output. */
+ regmap_update_bits(regmap, hd->mode_reg, PLL_OUTCTRL, PLL_OUTCTRL);
+}
+
+/* Enable an already-configured HFPLL. */
+static int clk_hfpll_enable(struct clk_hw *hw)
+{
+ unsigned long flags;
+ struct clk_hfpll *h = to_clk_hfpll(hw);
+ struct hfpll_data const *hd = h->d;
+ struct regmap *regmap = h->clkr.regmap;
+ u32 mode;
+
+ spin_lock_irqsave(&h->lock, flags);
+ regmap_read(regmap, hd->mode_reg, &mode);
+ if (!(mode & (PLL_BYPASSNL | PLL_RESET_N | PLL_OUTCTRL)))
+ __clk_hfpll_enable(hw);
+ spin_unlock_irqrestore(&h->lock, flags);
+
+ return 0;
+}
+
+static void __clk_hfpll_disable(struct clk_hfpll *h)
+{
+ struct hfpll_data const *hd = h->d;
+ struct regmap *regmap = h->clkr.regmap;
+
+ /*
+ * Disable the PLL output, disable test mode, enable the bypass mode,
+ * and assert the reset.
+ */
+ regmap_update_bits(regmap, hd->mode_reg,
+ PLL_BYPASSNL | PLL_RESET_N | PLL_OUTCTRL, 0);
+}
+
+static void clk_hfpll_disable(struct clk_hw *hw)
+{
+ struct clk_hfpll *h = to_clk_hfpll(hw);
+ unsigned long flags;
+
+ spin_lock_irqsave(&h->lock, flags);
+ __clk_hfpll_disable(h);
+ spin_unlock_irqrestore(&h->lock, flags);
+}
+
+static long clk_hfpll_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *parent_rate)
+{
+ struct clk_hfpll *h = to_clk_hfpll(hw);
+ struct hfpll_data const *hd = h->d;
+ unsigned long rrate;
+
+ rate = clamp(rate, hd->min_rate, hd->max_rate);
+
+ rrate = DIV_ROUND_UP(rate, *parent_rate) * *parent_rate;
+ if (rrate > hd->max_rate)
+ rrate -= *parent_rate;
+
+ return rrate;
+}
+
+/*
+ * For optimization reasons, assumes no downstream clocks are actively using
+ * it.
+ */
+static int clk_hfpll_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct clk_hfpll *h = to_clk_hfpll(hw);
+ struct hfpll_data const *hd = h->d;
+ struct regmap *regmap = h->clkr.regmap;
+ unsigned long flags;
+ u32 l_val, val;
+ bool enabled;
+
+ l_val = rate / parent_rate;
+
+ spin_lock_irqsave(&h->lock, flags);
+
+ enabled = __clk_is_enabled(hw->clk);
+ if (enabled)
+ __clk_hfpll_disable(h);
+
+ /* Pick the right VCO. */
+ if (hd->user_reg && hd->user_vco_mask) {
+ regmap_read(regmap, hd->user_reg, &val);
+ if (rate <= hd->low_vco_max_rate)
+ val &= ~hd->user_vco_mask;
+ else
+ val |= hd->user_vco_mask;
+ regmap_write(regmap, hd->user_reg, val);
+ }
+
+ regmap_write(regmap, hd->l_reg, l_val);
+
+ if (enabled)
+ __clk_hfpll_enable(hw);
+
+ spin_unlock_irqrestore(&h->lock, flags);
+
+ return 0;
+}
+
+static unsigned long clk_hfpll_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct clk_hfpll *h = to_clk_hfpll(hw);
+ struct hfpll_data const *hd = h->d;
+ struct regmap *regmap = h->clkr.regmap;
+ u32 l_val;
+
+ regmap_read(regmap, hd->l_reg, &l_val);
+
+ return l_val * parent_rate;
+}
+
+static void clk_hfpll_init(struct clk_hw *hw)
+{
+ struct clk_hfpll *h = to_clk_hfpll(hw);
+ struct hfpll_data const *hd = h->d;
+ struct regmap *regmap = h->clkr.regmap;
+ u32 mode, status;
+
+ regmap_read(regmap, hd->mode_reg, &mode);
+ if (mode != (PLL_BYPASSNL | PLL_RESET_N | PLL_OUTCTRL)) {
+ __clk_hfpll_init_once(hw);
+ return;
+ }
+
+ if (hd->status_reg) {
+ regmap_read(regmap, hd->status_reg, &status);
+ if (!(status & BIT(hd->lock_bit))) {
+ WARN(1, "HFPLL %s is ON, but not locked!\n",
+ __clk_get_name(hw->clk));
+ clk_hfpll_disable(hw);
+ __clk_hfpll_init_once(hw);
+ }
+ }
+}
+
+static int hfpll_is_enabled(struct clk_hw *hw)
+{
+ struct clk_hfpll *h = to_clk_hfpll(hw);
+ struct hfpll_data const *hd = h->d;
+ struct regmap *regmap = h->clkr.regmap;
+ u32 mode;
+
+ regmap_read(regmap, hd->mode_reg, &mode);
+ mode &= 0x7;
+ return mode == (PLL_BYPASSNL | PLL_RESET_N | PLL_OUTCTRL);
+}
+
+const struct clk_ops clk_ops_hfpll = {
+ .enable = clk_hfpll_enable,
+ .disable = clk_hfpll_disable,
+ .is_enabled = hfpll_is_enabled,
+ .round_rate = clk_hfpll_round_rate,
+ .set_rate = clk_hfpll_set_rate,
+ .recalc_rate = clk_hfpll_recalc_rate,
+ .init = clk_hfpll_init,
+};
+EXPORT_SYMBOL_GPL(clk_ops_hfpll);
diff --git a/drivers/clk/qcom/clk-hfpll.h b/drivers/clk/qcom/clk-hfpll.h
new file mode 100644
index 0000000..48c18d6
--- /dev/null
+++ b/drivers/clk/qcom/clk-hfpll.h
@@ -0,0 +1,54 @@
+/*
+ * Copyright (c) 2013-2014, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#ifndef __QCOM_CLK_HFPLL_H__
+#define __QCOM_CLK_HFPLL_H__
+
+#include <linux/clk-provider.h>
+#include <linux/spinlock.h>
+#include "clk-regmap.h"
+
+struct hfpll_data {
+ u32 mode_reg;
+ u32 l_reg;
+ u32 m_reg;
+ u32 n_reg;
+ u32 user_reg;
+ u32 droop_reg;
+ u32 config_reg;
+ u32 status_reg;
+ u8 lock_bit;
+
+ u32 droop_val;
+ u32 config_val;
+ u32 user_val;
+ u32 user_vco_mask;
+ unsigned long low_vco_max_rate;
+
+ unsigned long min_rate;
+ unsigned long max_rate;
+};
+
+struct clk_hfpll {
+ struct hfpll_data const *d;
+ int init_done;
+
+ struct clk_regmap clkr;
+ spinlock_t lock;
+};
+
+#define to_clk_hfpll(_hw) \
+ container_of(to_clk_regmap(_hw), struct clk_hfpll, clkr)
+
+extern const struct clk_ops clk_ops_hfpll;
+
+#endif
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
next prev parent reply other threads:[~2017-12-08 9:42 UTC|newest]
Thread overview: 55+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-12-08 9:42 [RESEND PATCH v4 00/12] Krait clocks + Krait CPUfreq Sricharan R
2017-12-08 9:42 ` Sricharan R
2017-12-08 9:42 ` [PATCH v4 01/12] ARM: Add Krait L2 register accessor functions Sricharan R
2017-12-08 9:42 ` Sricharan R
2017-12-08 9:42 ` Sricharan R
2017-12-08 9:42 ` [PATCH v4 02/12] clk: mux: Split out register accessors for reuse Sricharan R
2017-12-08 9:42 ` Sricharan R
2017-12-08 9:42 ` Sricharan R [this message]
2017-12-08 9:42 ` [PATCH v4 03/12] clk: qcom: Add support for High-Frequency PLLs (HFPLLs) Sricharan R
2017-12-08 9:42 ` [PATCH v4 04/12] clk: qcom: Add HFPLL driver Sricharan R
2017-12-08 9:42 ` Sricharan R
2017-12-12 20:35 ` Rob Herring
2017-12-12 20:35 ` Rob Herring
2017-12-13 11:10 ` Sricharan R
2017-12-13 11:10 ` Sricharan R
2017-12-08 9:42 ` [PATCH v4 05/12] clk: qcom: Add MSM8960/APQ8064's HFPLLs Sricharan R
2017-12-08 9:42 ` Sricharan R
2017-12-12 20:36 ` Rob Herring
2017-12-12 20:36 ` Rob Herring
2017-12-13 11:10 ` Sricharan R
2017-12-13 11:10 ` Sricharan R
2017-12-13 11:10 ` Sricharan R
2017-12-08 9:42 ` [PATCH v4 06/12] clk: qcom: Add IPQ806X's HFPLLs Sricharan R
2017-12-08 9:42 ` Sricharan R
2017-12-08 9:42 ` [PATCH v4 07/12] clk: qcom: Add support for Krait clocks Sricharan R
2017-12-08 9:42 ` Sricharan R
2017-12-08 9:42 ` [PATCH v4 08/12] clk: qcom: Add KPSS ACC/GCC driver Sricharan R
2017-12-08 9:42 ` Sricharan R
2017-12-12 20:38 ` Rob Herring
2017-12-12 20:38 ` Rob Herring
2017-12-13 11:42 ` Sricharan R
2017-12-13 11:42 ` Sricharan R
2017-12-08 9:42 ` [PATCH v4 09/12] clk: qcom: Add Krait clock controller driver Sricharan R
2017-12-08 9:42 ` Sricharan R
2017-12-12 20:51 ` Rob Herring
2017-12-12 20:51 ` Rob Herring
2017-12-13 11:11 ` Sricharan R
2017-12-13 11:11 ` Sricharan R
[not found] ` <1512726150-7204-1-git-send-email-sricharan-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2017-12-08 9:42 ` [PATCH v4 10/12] clk: qcom: Add safe switch hook for krait mux clocks Sricharan R
2017-12-08 9:42 ` Sricharan R
2017-12-08 9:42 ` Sricharan R
2017-12-08 9:42 ` [PATCH v4 11/12] cpufreq: Add module to register cpufreq on Krait CPUs Sricharan R
2017-12-08 9:42 ` Sricharan R
2017-12-11 8:39 ` Viresh Kumar
2017-12-11 8:39 ` Viresh Kumar
2017-12-11 13:22 ` Sricharan R
2017-12-11 13:22 ` Sricharan R
2017-12-08 9:42 ` [PATCH v4 12/12] cpufreq: dt: Reintroduce independent_clocks platform data Sricharan R
2017-12-08 9:42 ` Sricharan R
2017-12-11 8:33 ` Viresh Kumar
2017-12-11 8:33 ` Viresh Kumar
2017-12-11 13:24 ` Sricharan R
2017-12-11 13:24 ` Sricharan R
-- strict thread matches above, loose matches on Subject: below --
2017-12-08 9:29 [PATCH v4 00/12] Krait clocks + Krait CPUfreq Sricharan R
2017-12-08 9:29 ` [PATCH v4 03/12] clk: qcom: Add support for High-Frequency PLLs (HFPLLs) Sricharan R
2017-12-08 9:29 ` Sricharan R
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1512726150-7204-4-git-send-email-sricharan@codeaurora.org \
--to=sricharan@codeaurora.org \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=mturquette@baylibre.com \
--cc=sboyd@codeaurora.org \
--cc=viresh.kumar@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.