All of lore.kernel.org
 help / color / mirror / Atom feed
From: Ilia Lin <ilialin@codeaurora.org>
To: linux-clk@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-arm-msm@vger.kernel.org, sboyd@codeaurora.org
Cc: devicetree@vger.kernel.org, mark.rutland@arm.com,
	will.deacon@arm.com, rnayak@codeaurora.org,
	qualcomm-lt@lists.linaro.org, ilialin@codeaurora.org,
	celster@codeaurora.org, tfinkel@codeaurora.org
Subject: [PATCH 00/10] clk: qcom: CPU clock driver for msm8996
Date: Tue, 12 Dec 2017 14:31:27 +0200	[thread overview]
Message-ID: <1513081897-31612-1-git-send-email-ilialin@codeaurora.org> (raw)

This series adds support for the CPU clocks on msm8996 devices.
A previous post of RFC can be found here
https://patchwork.kernel.org/patch/9662917/

Ilia Lin (5):
  soc: qcom: Separate kryo l2 accessors from PMU driver
  clk: qcom: clk-cpu-8996: Prepare PLLs on probe
  clk: qcom: Add ACD path to CPU clock driver for msm8996
  DT: QCOM: Add cpufreq-dt to msm8996
  DT: QCOM: Add thermal mitigation to msm8996

Rajendra Nayak (4):
  clk: qcom: Make clk_alpha_pll_configure available to modules
  clk: qcom: Add CPU clock driver for msm8996
  clk: qcom: cpu-8996: Add support to switch to alternate PLL
  clk: qcom: cpu-8996: Add support to switch below 600Mhz

Taniya Das (1):
  clk: qcom: Fix .set_rate to handle alpha PLLs w/wo dynamic update

 .../devicetree/bindings/clock/qcom,kryocc.txt      |  17 +
 arch/arm64/Kconfig.platforms                       |   7 +
 arch/arm64/boot/dts/qcom/apq8096-db820c.dts        |   2 +-
 arch/arm64/boot/dts/qcom/msm8996.dtsi              | 282 ++++++++++-
 drivers/clk/qcom/Kconfig                           |   8 +
 drivers/clk/qcom/Makefile                          |   1 +
 drivers/clk/qcom/clk-alpha-pll.c                   |  72 ++-
 drivers/clk/qcom/clk-alpha-pll.h                   |   5 +
 drivers/clk/qcom/clk-cpu-8996.c                    | 542 +++++++++++++++++++++
 drivers/cpufreq/cpufreq-dt-platdev.c               |   3 +
 drivers/perf/qcom_l2_pmu.c                         |  48 +-
 drivers/soc/qcom/Makefile                          |   1 +
 drivers/soc/qcom/kryo-l2-accessors.c               |  64 +++
 include/soc/qcom/kryo-l2-accessors.h               |  27 +
 14 files changed, 1009 insertions(+), 70 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/clock/qcom,kryocc.txt
 create mode 100644 drivers/clk/qcom/clk-cpu-8996.c
 create mode 100644 drivers/soc/qcom/kryo-l2-accessors.c
 create mode 100644 include/soc/qcom/kryo-l2-accessors.h

-- 
QUALCOMM ISRAEL, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation

-- 
1.9.1

WARNING: multiple messages have this Message-ID (diff)
From: ilialin@codeaurora.org (Ilia Lin)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 00/10] clk: qcom: CPU clock driver for msm8996
Date: Tue, 12 Dec 2017 14:31:27 +0200	[thread overview]
Message-ID: <1513081897-31612-1-git-send-email-ilialin@codeaurora.org> (raw)

This series adds support for the CPU clocks on msm8996 devices.
A previous post of RFC can be found here
https://patchwork.kernel.org/patch/9662917/

Ilia Lin (5):
  soc: qcom: Separate kryo l2 accessors from PMU driver
  clk: qcom: clk-cpu-8996: Prepare PLLs on probe
  clk: qcom: Add ACD path to CPU clock driver for msm8996
  DT: QCOM: Add cpufreq-dt to msm8996
  DT: QCOM: Add thermal mitigation to msm8996

Rajendra Nayak (4):
  clk: qcom: Make clk_alpha_pll_configure available to modules
  clk: qcom: Add CPU clock driver for msm8996
  clk: qcom: cpu-8996: Add support to switch to alternate PLL
  clk: qcom: cpu-8996: Add support to switch below 600Mhz

Taniya Das (1):
  clk: qcom: Fix .set_rate to handle alpha PLLs w/wo dynamic update

 .../devicetree/bindings/clock/qcom,kryocc.txt      |  17 +
 arch/arm64/Kconfig.platforms                       |   7 +
 arch/arm64/boot/dts/qcom/apq8096-db820c.dts        |   2 +-
 arch/arm64/boot/dts/qcom/msm8996.dtsi              | 282 ++++++++++-
 drivers/clk/qcom/Kconfig                           |   8 +
 drivers/clk/qcom/Makefile                          |   1 +
 drivers/clk/qcom/clk-alpha-pll.c                   |  72 ++-
 drivers/clk/qcom/clk-alpha-pll.h                   |   5 +
 drivers/clk/qcom/clk-cpu-8996.c                    | 542 +++++++++++++++++++++
 drivers/cpufreq/cpufreq-dt-platdev.c               |   3 +
 drivers/perf/qcom_l2_pmu.c                         |  48 +-
 drivers/soc/qcom/Makefile                          |   1 +
 drivers/soc/qcom/kryo-l2-accessors.c               |  64 +++
 include/soc/qcom/kryo-l2-accessors.h               |  27 +
 14 files changed, 1009 insertions(+), 70 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/clock/qcom,kryocc.txt
 create mode 100644 drivers/clk/qcom/clk-cpu-8996.c
 create mode 100644 drivers/soc/qcom/kryo-l2-accessors.c
 create mode 100644 include/soc/qcom/kryo-l2-accessors.h

-- 
QUALCOMM ISRAEL, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation

-- 
1.9.1

             reply	other threads:[~2017-12-12 12:31 UTC|newest]

Thread overview: 46+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-12-12 12:31 Ilia Lin [this message]
2017-12-12 12:31 ` [PATCH 00/10] clk: qcom: CPU clock driver for msm8996 Ilia Lin
2017-12-12 12:31 ` [PATCH 01/10] soc: qcom: Separate kryo l2 accessors from PMU driver Ilia Lin
2017-12-12 12:31   ` Ilia Lin
2017-12-12 14:03   ` Mark Rutland
2017-12-12 14:03     ` Mark Rutland
2017-12-22  2:06     ` Stephen Boyd
2017-12-22  2:06       ` Stephen Boyd
2018-01-04 11:15       ` ilialin
2018-01-04 11:15         ` ilialin at codeaurora.org
2018-01-04 11:15         ` ilialin
2018-01-04 11:13     ` ilialin
2018-01-04 11:13       ` ilialin at codeaurora.org
2018-01-04 11:13       ` ilialin
2017-12-12 12:31 ` [PATCH 02/10] clk: qcom: Fix .set_rate to handle alpha PLLs w/wo dynamic update Ilia Lin
2017-12-12 12:31   ` Ilia Lin
     [not found]   ` <1513081897-31612-3-git-send-email-ilialin-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2017-12-12 15:05     ` Julien Thierry
2017-12-12 15:05       ` Julien Thierry
2017-12-12 15:05       ` Julien Thierry
2018-01-04 11:14       ` ilialin
2018-01-04 11:14         ` ilialin at codeaurora.org
2018-01-04 11:14         ` ilialin
2017-12-12 12:31 ` [PATCH 03/10] clk: qcom: Make clk_alpha_pll_configure available to modules Ilia Lin
2017-12-12 12:31   ` Ilia Lin
2017-12-12 12:31 ` [PATCH 04/10] clk: qcom: Add CPU clock driver for msm8996 Ilia Lin
2017-12-12 12:31   ` Ilia Lin
2017-12-15 22:35   ` Rob Herring
2017-12-15 22:35     ` Rob Herring
2018-01-04 11:15     ` ilialin
2018-01-04 11:15       ` ilialin at codeaurora.org
2018-01-04 11:15       ` ilialin
2017-12-12 12:31 ` [PATCH 07/10] clk: qcom: clk-cpu-8996: Prepare PLLs on probe Ilia Lin
2017-12-12 12:31   ` Ilia Lin
     [not found] ` <1513081897-31612-1-git-send-email-ilialin-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2017-12-12 12:31   ` [PATCH 05/10] clk: qcom: cpu-8996: Add support to switch to alternate PLL Ilia Lin
2017-12-12 12:31     ` Ilia Lin
2017-12-12 12:31     ` Ilia Lin
2017-12-12 12:31   ` [PATCH 06/10] clk: qcom: cpu-8996: Add support to switch below 600Mhz Ilia Lin
2017-12-12 12:31     ` Ilia Lin
2017-12-12 12:31     ` Ilia Lin
2017-12-12 12:31   ` [PATCH 08/10] clk: qcom: Add ACD path to CPU clock driver for msm8996 Ilia Lin
2017-12-12 12:31     ` Ilia Lin
2017-12-12 12:31     ` Ilia Lin
2017-12-12 12:31 ` [PATCH 09/10] DT: QCOM: Add cpufreq-dt to msm8996 Ilia Lin
2017-12-12 12:31   ` Ilia Lin
2017-12-12 12:31 ` [PATCH 10/10] DT: QCOM: Add thermal mitigation " Ilia Lin
2017-12-12 12:31   ` Ilia Lin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1513081897-31612-1-git-send-email-ilialin@codeaurora.org \
    --to=ilialin@codeaurora.org \
    --cc=celster@codeaurora.org \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=qualcomm-lt@lists.linaro.org \
    --cc=rnayak@codeaurora.org \
    --cc=sboyd@codeaurora.org \
    --cc=tfinkel@codeaurora.org \
    --cc=will.deacon@arm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.