From: Sinan Kaya <okaya@codeaurora.org>
To: dmaengine@vger.kernel.org, timur@codeaurora.org,
devicetree@vger.kernel.org, linux-acpi@vger.kernel.org,
sakari.ailus@linux.intel.com
Cc: linux-arm-msm@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
Sinan Kaya <okaya@codeaurora.org>,
Andy Gross <andy.gross@linaro.org>,
David Brown <david.brown@linaro.org>,
Vinod Koul <vinod.koul@intel.com>,
Dan Williams <dan.j.williams@intel.com>,
"open list:ARM/QUALCOMM SUPPORT" <linux-soc@vger.kernel.org>,
open list <linux-kernel@vger.kernel.org>
Subject: [V8,6/7] dmaengine: qcom_hidma: Add support for the new revision
Date: Wed, 13 Dec 2017 02:20:52 -0500 [thread overview]
Message-ID: <1513149653-19451-7-git-send-email-okaya@codeaurora.org> (raw)
Add support for probing the newer HW and also organize MSI capable hardware
into an array for maintenance reasons.
Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
---
drivers/dma/qcom/hidma.c | 34 +++++++++++++---------------------
1 file changed, 13 insertions(+), 21 deletions(-)
diff --git a/drivers/dma/qcom/hidma.c b/drivers/dma/qcom/hidma.c
index e366985..c146c6d 100644
--- a/drivers/dma/qcom/hidma.c
+++ b/drivers/dma/qcom/hidma.c
@@ -50,6 +50,7 @@
#include <linux/slab.h>
#include <linux/spinlock.h>
#include <linux/of_dma.h>
+#include <linux/of_device.h>
#include <linux/property.h>
#include <linux/delay.h>
#include <linux/acpi.h>
@@ -104,6 +105,9 @@ static void hidma_free(struct hidma_dev *dmadev)
module_param(nr_desc_prm, uint, 0644);
MODULE_PARM_DESC(nr_desc_prm, "number of descriptors (default: 0)");
+enum hidma_cap {
+ HIDMA_MSI_CAP = 1,
+};
/* process completed descriptors */
static void hidma_process_completed(struct hidma_chan *mchan)
@@ -736,25 +740,12 @@ static int hidma_request_msi(struct hidma_dev *dmadev,
#endif
}
-static bool hidma_msi_capable(struct device *dev)
+static bool hidma_test_capability(struct device *dev, enum hidma_cap test_cap)
{
- struct acpi_device *adev = ACPI_COMPANION(dev);
- const char *of_compat;
- int ret = -EINVAL;
-
- if (!adev || acpi_disabled) {
- ret = device_property_read_string(dev, "compatible",
- &of_compat);
- if (ret)
- return false;
+ enum hidma_cap cap;
- ret = strcmp(of_compat, "qcom,hidma-1.1");
- } else {
-#ifdef CONFIG_ACPI
- ret = strcmp(acpi_device_hid(adev), "QCOM8062");
-#endif
- }
- return ret == 0;
+ cap = (enum hidma_cap) device_get_match_data(dev);
+ return cap ? ((cap & test_cap) > 0) : 0;
}
static int hidma_probe(struct platform_device *pdev)
@@ -834,8 +825,7 @@ static int hidma_probe(struct platform_device *pdev)
* Determine the MSI capability of the platform. Old HW doesn't
* support MSI.
*/
- msi = hidma_msi_capable(&pdev->dev);
-
+ msi = hidma_test_capability(&pdev->dev, HIDMA_MSI_CAP);
device_property_read_u32(&pdev->dev, "desc-count",
&dmadev->nr_descriptors);
@@ -953,7 +943,8 @@ static int hidma_remove(struct platform_device *pdev)
#if IS_ENABLED(CONFIG_ACPI)
static const struct acpi_device_id hidma_acpi_ids[] = {
{"QCOM8061"},
- {"QCOM8062"},
+ {"QCOM8062", HIDMA_MSI_CAP},
+ {"QCOM8063", HIDMA_MSI_CAP},
{},
};
MODULE_DEVICE_TABLE(acpi, hidma_acpi_ids);
@@ -961,7 +952,8 @@ static int hidma_remove(struct platform_device *pdev)
static const struct of_device_id hidma_match[] = {
{.compatible = "qcom,hidma-1.0",},
- {.compatible = "qcom,hidma-1.1",},
+ {.compatible = "qcom,hidma-1.1", .data = (void *)(HIDMA_MSI_CAP),},
+ {.compatible = "qcom,hidma-1.2", .data = (void *)(HIDMA_MSI_CAP),},
{},
};
MODULE_DEVICE_TABLE(of, hidma_match);
WARNING: multiple messages have this Message-ID (diff)
From: Sinan Kaya <okaya@codeaurora.org>
To: dmaengine@vger.kernel.org, timur@codeaurora.org,
devicetree@vger.kernel.org, linux-acpi@vger.kernel.org,
sakari.ailus@linux.intel.com
Cc: linux-arm-msm@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
Sinan Kaya <okaya@codeaurora.org>,
Andy Gross <andy.gross@linaro.org>,
David Brown <david.brown@linaro.org>,
Vinod Koul <vinod.koul@intel.com>,
Dan Williams <dan.j.williams@intel.com>,
"open list:ARM/QUALCOMM SUPPORT" <linux-soc@vger.kernel.org>,
open list <linux-kernel@vger.kernel.org>
Subject: [PATCH V8 6/7] dmaengine: qcom_hidma: Add support for the new revision
Date: Wed, 13 Dec 2017 02:20:52 -0500 [thread overview]
Message-ID: <1513149653-19451-7-git-send-email-okaya@codeaurora.org> (raw)
In-Reply-To: <1513149653-19451-1-git-send-email-okaya@codeaurora.org>
Add support for probing the newer HW and also organize MSI capable hardware
into an array for maintenance reasons.
Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
---
drivers/dma/qcom/hidma.c | 34 +++++++++++++---------------------
1 file changed, 13 insertions(+), 21 deletions(-)
diff --git a/drivers/dma/qcom/hidma.c b/drivers/dma/qcom/hidma.c
index e366985..c146c6d 100644
--- a/drivers/dma/qcom/hidma.c
+++ b/drivers/dma/qcom/hidma.c
@@ -50,6 +50,7 @@
#include <linux/slab.h>
#include <linux/spinlock.h>
#include <linux/of_dma.h>
+#include <linux/of_device.h>
#include <linux/property.h>
#include <linux/delay.h>
#include <linux/acpi.h>
@@ -104,6 +105,9 @@ static void hidma_free(struct hidma_dev *dmadev)
module_param(nr_desc_prm, uint, 0644);
MODULE_PARM_DESC(nr_desc_prm, "number of descriptors (default: 0)");
+enum hidma_cap {
+ HIDMA_MSI_CAP = 1,
+};
/* process completed descriptors */
static void hidma_process_completed(struct hidma_chan *mchan)
@@ -736,25 +740,12 @@ static int hidma_request_msi(struct hidma_dev *dmadev,
#endif
}
-static bool hidma_msi_capable(struct device *dev)
+static bool hidma_test_capability(struct device *dev, enum hidma_cap test_cap)
{
- struct acpi_device *adev = ACPI_COMPANION(dev);
- const char *of_compat;
- int ret = -EINVAL;
-
- if (!adev || acpi_disabled) {
- ret = device_property_read_string(dev, "compatible",
- &of_compat);
- if (ret)
- return false;
+ enum hidma_cap cap;
- ret = strcmp(of_compat, "qcom,hidma-1.1");
- } else {
-#ifdef CONFIG_ACPI
- ret = strcmp(acpi_device_hid(adev), "QCOM8062");
-#endif
- }
- return ret == 0;
+ cap = (enum hidma_cap) device_get_match_data(dev);
+ return cap ? ((cap & test_cap) > 0) : 0;
}
static int hidma_probe(struct platform_device *pdev)
@@ -834,8 +825,7 @@ static int hidma_probe(struct platform_device *pdev)
* Determine the MSI capability of the platform. Old HW doesn't
* support MSI.
*/
- msi = hidma_msi_capable(&pdev->dev);
-
+ msi = hidma_test_capability(&pdev->dev, HIDMA_MSI_CAP);
device_property_read_u32(&pdev->dev, "desc-count",
&dmadev->nr_descriptors);
@@ -953,7 +943,8 @@ static int hidma_remove(struct platform_device *pdev)
#if IS_ENABLED(CONFIG_ACPI)
static const struct acpi_device_id hidma_acpi_ids[] = {
{"QCOM8061"},
- {"QCOM8062"},
+ {"QCOM8062", HIDMA_MSI_CAP},
+ {"QCOM8063", HIDMA_MSI_CAP},
{},
};
MODULE_DEVICE_TABLE(acpi, hidma_acpi_ids);
@@ -961,7 +952,8 @@ static int hidma_remove(struct platform_device *pdev)
static const struct of_device_id hidma_match[] = {
{.compatible = "qcom,hidma-1.0",},
- {.compatible = "qcom,hidma-1.1",},
+ {.compatible = "qcom,hidma-1.1", .data = (void *)(HIDMA_MSI_CAP),},
+ {.compatible = "qcom,hidma-1.2", .data = (void *)(HIDMA_MSI_CAP),},
{},
};
MODULE_DEVICE_TABLE(of, hidma_match);
--
1.9.1
WARNING: multiple messages have this Message-ID (diff)
From: okaya@codeaurora.org (Sinan Kaya)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH V8 6/7] dmaengine: qcom_hidma: Add support for the new revision
Date: Wed, 13 Dec 2017 02:20:52 -0500 [thread overview]
Message-ID: <1513149653-19451-7-git-send-email-okaya@codeaurora.org> (raw)
In-Reply-To: <1513149653-19451-1-git-send-email-okaya@codeaurora.org>
Add support for probing the newer HW and also organize MSI capable hardware
into an array for maintenance reasons.
Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
---
drivers/dma/qcom/hidma.c | 34 +++++++++++++---------------------
1 file changed, 13 insertions(+), 21 deletions(-)
diff --git a/drivers/dma/qcom/hidma.c b/drivers/dma/qcom/hidma.c
index e366985..c146c6d 100644
--- a/drivers/dma/qcom/hidma.c
+++ b/drivers/dma/qcom/hidma.c
@@ -50,6 +50,7 @@
#include <linux/slab.h>
#include <linux/spinlock.h>
#include <linux/of_dma.h>
+#include <linux/of_device.h>
#include <linux/property.h>
#include <linux/delay.h>
#include <linux/acpi.h>
@@ -104,6 +105,9 @@ static void hidma_free(struct hidma_dev *dmadev)
module_param(nr_desc_prm, uint, 0644);
MODULE_PARM_DESC(nr_desc_prm, "number of descriptors (default: 0)");
+enum hidma_cap {
+ HIDMA_MSI_CAP = 1,
+};
/* process completed descriptors */
static void hidma_process_completed(struct hidma_chan *mchan)
@@ -736,25 +740,12 @@ static int hidma_request_msi(struct hidma_dev *dmadev,
#endif
}
-static bool hidma_msi_capable(struct device *dev)
+static bool hidma_test_capability(struct device *dev, enum hidma_cap test_cap)
{
- struct acpi_device *adev = ACPI_COMPANION(dev);
- const char *of_compat;
- int ret = -EINVAL;
-
- if (!adev || acpi_disabled) {
- ret = device_property_read_string(dev, "compatible",
- &of_compat);
- if (ret)
- return false;
+ enum hidma_cap cap;
- ret = strcmp(of_compat, "qcom,hidma-1.1");
- } else {
-#ifdef CONFIG_ACPI
- ret = strcmp(acpi_device_hid(adev), "QCOM8062");
-#endif
- }
- return ret == 0;
+ cap = (enum hidma_cap) device_get_match_data(dev);
+ return cap ? ((cap & test_cap) > 0) : 0;
}
static int hidma_probe(struct platform_device *pdev)
@@ -834,8 +825,7 @@ static int hidma_probe(struct platform_device *pdev)
* Determine the MSI capability of the platform. Old HW doesn't
* support MSI.
*/
- msi = hidma_msi_capable(&pdev->dev);
-
+ msi = hidma_test_capability(&pdev->dev, HIDMA_MSI_CAP);
device_property_read_u32(&pdev->dev, "desc-count",
&dmadev->nr_descriptors);
@@ -953,7 +943,8 @@ static int hidma_remove(struct platform_device *pdev)
#if IS_ENABLED(CONFIG_ACPI)
static const struct acpi_device_id hidma_acpi_ids[] = {
{"QCOM8061"},
- {"QCOM8062"},
+ {"QCOM8062", HIDMA_MSI_CAP},
+ {"QCOM8063", HIDMA_MSI_CAP},
{},
};
MODULE_DEVICE_TABLE(acpi, hidma_acpi_ids);
@@ -961,7 +952,8 @@ static int hidma_remove(struct platform_device *pdev)
static const struct of_device_id hidma_match[] = {
{.compatible = "qcom,hidma-1.0",},
- {.compatible = "qcom,hidma-1.1",},
+ {.compatible = "qcom,hidma-1.1", .data = (void *)(HIDMA_MSI_CAP),},
+ {.compatible = "qcom,hidma-1.2", .data = (void *)(HIDMA_MSI_CAP),},
{},
};
MODULE_DEVICE_TABLE(of, hidma_match);
--
1.9.1
WARNING: multiple messages have this Message-ID (diff)
From: Sinan Kaya <okaya@codeaurora.org>
To: dmaengine@vger.kernel.org, timur@codeaurora.org,
devicetree@vger.kernel.org, linux-acpi@vger.kernel.org,
sakari.ailus@linux.intel.com
Cc: linux-arm-msm@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
Sinan Kaya <okaya@codeaurora.org>,
Andy Gross <andy.gross@linaro.org>,
David Brown <david.brown@linaro.org>,
Vinod Koul <vinod.koul@intel.com>,
Dan Williams <dan.j.williams@intel.com>,
linux-soc@vger.kernel.org (open list:ARM/QUALCOMM SUPPORT),
linux-kernel@vger.kernel.org (open list)
Subject: [PATCH V8 6/7] dmaengine: qcom_hidma: Add support for the new revision
Date: Wed, 13 Dec 2017 02:20:52 -0500 [thread overview]
Message-ID: <1513149653-19451-7-git-send-email-okaya@codeaurora.org> (raw)
In-Reply-To: <1513149653-19451-1-git-send-email-okaya@codeaurora.org>
Add support for probing the newer HW and also organize MSI capable hardware
into an array for maintenance reasons.
Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
---
drivers/dma/qcom/hidma.c | 34 +++++++++++++---------------------
1 file changed, 13 insertions(+), 21 deletions(-)
diff --git a/drivers/dma/qcom/hidma.c b/drivers/dma/qcom/hidma.c
index e366985..c146c6d 100644
--- a/drivers/dma/qcom/hidma.c
+++ b/drivers/dma/qcom/hidma.c
@@ -50,6 +50,7 @@
#include <linux/slab.h>
#include <linux/spinlock.h>
#include <linux/of_dma.h>
+#include <linux/of_device.h>
#include <linux/property.h>
#include <linux/delay.h>
#include <linux/acpi.h>
@@ -104,6 +105,9 @@ static void hidma_free(struct hidma_dev *dmadev)
module_param(nr_desc_prm, uint, 0644);
MODULE_PARM_DESC(nr_desc_prm, "number of descriptors (default: 0)");
+enum hidma_cap {
+ HIDMA_MSI_CAP = 1,
+};
/* process completed descriptors */
static void hidma_process_completed(struct hidma_chan *mchan)
@@ -736,25 +740,12 @@ static int hidma_request_msi(struct hidma_dev *dmadev,
#endif
}
-static bool hidma_msi_capable(struct device *dev)
+static bool hidma_test_capability(struct device *dev, enum hidma_cap test_cap)
{
- struct acpi_device *adev = ACPI_COMPANION(dev);
- const char *of_compat;
- int ret = -EINVAL;
-
- if (!adev || acpi_disabled) {
- ret = device_property_read_string(dev, "compatible",
- &of_compat);
- if (ret)
- return false;
+ enum hidma_cap cap;
- ret = strcmp(of_compat, "qcom,hidma-1.1");
- } else {
-#ifdef CONFIG_ACPI
- ret = strcmp(acpi_device_hid(adev), "QCOM8062");
-#endif
- }
- return ret == 0;
+ cap = (enum hidma_cap) device_get_match_data(dev);
+ return cap ? ((cap & test_cap) > 0) : 0;
}
static int hidma_probe(struct platform_device *pdev)
@@ -834,8 +825,7 @@ static int hidma_probe(struct platform_device *pdev)
* Determine the MSI capability of the platform. Old HW doesn't
* support MSI.
*/
- msi = hidma_msi_capable(&pdev->dev);
-
+ msi = hidma_test_capability(&pdev->dev, HIDMA_MSI_CAP);
device_property_read_u32(&pdev->dev, "desc-count",
&dmadev->nr_descriptors);
@@ -953,7 +943,8 @@ static int hidma_remove(struct platform_device *pdev)
#if IS_ENABLED(CONFIG_ACPI)
static const struct acpi_device_id hidma_acpi_ids[] = {
{"QCOM8061"},
- {"QCOM8062"},
+ {"QCOM8062", HIDMA_MSI_CAP},
+ {"QCOM8063", HIDMA_MSI_CAP},
{},
};
MODULE_DEVICE_TABLE(acpi, hidma_acpi_ids);
@@ -961,7 +952,8 @@ static int hidma_remove(struct platform_device *pdev)
static const struct of_device_id hidma_match[] = {
{.compatible = "qcom,hidma-1.0",},
- {.compatible = "qcom,hidma-1.1",},
+ {.compatible = "qcom,hidma-1.1", .data = (void *)(HIDMA_MSI_CAP),},
+ {.compatible = "qcom,hidma-1.2", .data = (void *)(HIDMA_MSI_CAP),},
{},
};
MODULE_DEVICE_TABLE(of, hidma_match);
--
1.9.1
next reply other threads:[~2017-12-13 7:20 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-12-13 7:20 Sinan Kaya [this message]
2017-12-13 7:20 ` [PATCH V8 6/7] dmaengine: qcom_hidma: Add support for the new revision Sinan Kaya
2017-12-13 7:20 ` Sinan Kaya
2017-12-13 7:20 ` Sinan Kaya
-- strict thread matches above, loose matches on Subject: below --
2017-12-13 7:20 [V8,7/7] dmaengine: qcom_hidma: Add identity register support Sinan Kaya
2017-12-13 7:20 ` [PATCH V8 7/7] " Sinan Kaya
2017-12-13 7:20 ` Sinan Kaya
2017-12-13 7:20 ` Sinan Kaya
2017-12-13 7:20 [V8,5/7] ACPI: properties: Implement get_match_data() callback Sinan Kaya
2017-12-13 7:20 ` [PATCH V8 5/7] " Sinan Kaya
2017-12-13 7:20 ` Sinan Kaya
2017-12-13 7:20 ` Sinan Kaya
2017-12-13 7:20 [V8,4/7] OF: " Sinan Kaya
2017-12-13 7:20 ` [PATCH V8 4/7] " Sinan Kaya
2017-12-13 7:20 ` Sinan Kaya
2017-12-13 7:20 ` Sinan Kaya
2017-12-13 7:20 [V8,3/7] device property: Introduce a common API to fetch device match data Sinan Kaya
2017-12-13 7:20 ` [PATCH V8 3/7] " Sinan Kaya
2017-12-13 7:20 ` Sinan Kaya
2017-12-13 7:20 ` Sinan Kaya
2017-12-13 7:20 [V8,2/7] ACPI / bus: Introduce acpi_get_match_data() function Sinan Kaya
2017-12-13 7:20 ` [PATCH V8 2/7] " Sinan Kaya
2017-12-13 7:20 ` Sinan Kaya
2017-12-13 7:20 ` Sinan Kaya
2017-12-13 7:20 [V8,1/7] Documentation: DT: qcom_hidma: Bump HW revision for the bugfixed HW Sinan Kaya
2017-12-13 7:20 ` [PATCH V8 1/7] " Sinan Kaya
2017-12-13 7:20 ` Sinan Kaya
2017-12-13 7:20 ` Sinan Kaya
2017-12-13 7:20 [PATCH V8 0/7] dmaengine: qcom_hidma: add support for " Sinan Kaya
2017-12-13 7:20 ` Sinan Kaya
2017-12-13 8:43 ` Vinod Koul
2017-12-13 8:43 ` Vinod Koul
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1513149653-19451-7-git-send-email-okaya@codeaurora.org \
--to=okaya@codeaurora.org \
--cc=andy.gross@linaro.org \
--cc=dan.j.williams@intel.com \
--cc=david.brown@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=dmaengine@vger.kernel.org \
--cc=linux-acpi@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-soc@vger.kernel.org \
--cc=sakari.ailus@linux.intel.com \
--cc=timur@codeaurora.org \
--cc=vinod.koul@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.