From: Ilia Lin <ilialin@codeaurora.org>
To: linux-clk@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-arm-msm@vger.kernel.org, sboyd@codeaurora.org
Cc: devicetree@vger.kernel.org, mark.rutland@arm.com,
will.deacon@arm.com, rnayak@codeaurora.org,
ilialin@codeaurora.org, amit.kucheria@linaro.org,
nicolas.dechesne@linaro.org, celster@codeaurora.org,
tfinkel@codeaurora.org
Subject: [PATCH v2 11/11] DT: QCOM: Add thermal mitigation to msm8996
Date: Thu, 4 Jan 2018 13:10:15 +0200 [thread overview]
Message-ID: <1515064215-22202-12-git-send-email-ilialin@codeaurora.org> (raw)
In-Reply-To: <1515064215-22202-1-git-send-email-ilialin@codeaurora.org>
Add thermal mitigation configuration to msm8996.
With the cpufreq-dt OPP table the CPU frequency may be
scaled and therefore throttled by the thermal config.
Signed-off-by: Ilia Lin <ilialin@codeaurora.org>
---
arch/arm64/boot/dts/qcom/msm8996.dtsi | 98 +++++++++++++++++++++++++++++++----
1 file changed, 87 insertions(+), 11 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index 8beea7e..6fa061f 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -14,6 +14,7 @@
#include <dt-bindings/clock/qcom,gcc-msm8996.h>
#include <dt-bindings/clock/qcom,mmcc-msm8996.h>
#include <dt-bindings/clock/qcom,rpmcc.h>
+#include <dt-bindings/thermal/thermal.h>
/ {
model = "Qualcomm Technologies, Inc. MSM8996";
@@ -88,6 +89,10 @@
enable-method = "psci";
clocks = <&kryocc 0>;
operating-points-v2 = <&cluster0_opp>;
+ /* cooling options */
+ cooling-min-level = <0>;
+ cooling-max-level = <15>;
+ #cooling-cells = <2>;
next-level-cache = <&L2_0>;
L2_0: l2-cache {
compatible = "cache";
@@ -102,6 +107,10 @@
enable-method = "psci";
clocks = <&kryocc 0>;
operating-points-v2 = <&cluster0_opp>;
+ /* cooling options */
+ cooling-min-level = <0>;
+ cooling-max-level = <15>;
+ #cooling-cells = <2>;
next-level-cache = <&L2_0>;
};
@@ -112,6 +121,10 @@
enable-method = "psci";
clocks = <&kryocc 1>;
operating-points-v2 = <&cluster1_opp>;
+ /* cooling options */
+ cooling-min-level = <0>;
+ cooling-max-level = <15>;
+ #cooling-cells = <2>;
next-level-cache = <&L2_1>;
L2_1: l2-cache {
compatible = "cache";
@@ -126,6 +139,10 @@
enable-method = "psci";
clocks = <&kryocc 1>;
operating-points-v2 = <&cluster1_opp>;
+ /* cooling options */
+ cooling-min-level = <0>;
+ cooling-max-level = <15>;
+ #cooling-cells = <2>;
next-level-cache = <&L2_1>;
};
@@ -336,18 +353,33 @@
thermal-sensors = <&tsens0 3>;
trips {
- cpu_alert0: trip0 {
+ cpu_alert0: cpu_alert0 {
temperature = <75000>;
hysteresis = <2000>;
+ type = "active";
+ };
+ cpu_warn0: cpu_warn0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
type = "passive";
};
-
- cpu_crit0: trip1 {
+ cpu_crit0: cpu_crit0 {
temperature = <110000>;
hysteresis = <2000>;
type = "critical";
};
};
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu_alert0>;
+ cooling-device = <&CPU0 THERMAL_NO_LIMIT 7>;
+ };
+ map1 {
+ trip = <&cpu_warn0>;
+ cooling-device = <&CPU0 8 THERMAL_NO_LIMIT>;
+ };
+ };
};
cpu-thermal1 {
@@ -357,18 +389,33 @@
thermal-sensors = <&tsens0 5>;
trips {
- cpu_alert1: trip0 {
+ cpu_alert1: cpu_alert1 {
temperature = <75000>;
hysteresis = <2000>;
+ type = "active";
+ };
+ cpu_warn1: cpu_warn1 {
+ temperature = <90000>;
+ hysteresis = <2000>;
type = "passive";
};
-
- cpu_crit1: trip1 {
+ cpu_crit1: cpu_crit1 {
temperature = <110000>;
hysteresis = <2000>;
type = "critical";
};
};
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu_alert1>;
+ cooling-device = <&CPU0 THERMAL_NO_LIMIT 7>;
+ };
+ map1 {
+ trip = <&cpu_warn1>;
+ cooling-device = <&CPU0 8 THERMAL_NO_LIMIT>;
+ };
+ };
};
cpu-thermal2 {
@@ -378,18 +425,32 @@
thermal-sensors = <&tsens0 8>;
trips {
- cpu_alert2: trip0 {
+ cpu_alert2: cpu_alert2 {
temperature = <75000>;
hysteresis = <2000>;
+ type = "active";
+ };
+ cpu_warn2: cpu_warn2 {
+ temperature = <90000>;
+ hysteresis = <2000>;
type = "passive";
};
-
- cpu_crit2: trip1 {
+ cpu_crit2: cpu_crit2 {
temperature = <110000>;
hysteresis = <2000>;
type = "critical";
};
};
+ cooling-maps {
+ map0 {
+ trip = <&cpu_alert2>;
+ cooling-device = <&CPU2 THERMAL_NO_LIMIT 7>;
+ };
+ map1 {
+ trip = <&cpu_warn2>;
+ cooling-device = <&CPU2 8 THERMAL_NO_LIMIT>;
+ };
+ };
};
cpu-thermal3 {
@@ -399,18 +460,33 @@
thermal-sensors = <&tsens0 10>;
trips {
- cpu_alert3: trip0 {
+ cpu_alert3: cpu_alert3 {
temperature = <75000>;
hysteresis = <2000>;
+ type = "active";
+ };
+ cpu_warn3: cpu_warn3 {
+ temperature = <90000>;
+ hysteresis = <2000>;
type = "passive";
};
-
cpu_crit3: trip1 {
temperature = <110000>;
hysteresis = <2000>;
type = "critical";
};
};
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu_alert3>;
+ cooling-device = <&CPU2 THERMAL_NO_LIMIT 7>;
+ };
+ map1 {
+ trip = <&cpu_warn3>;
+ cooling-device = <&CPU2 8 THERMAL_NO_LIMIT>;
+ };
+ };
};
};
--
1.9.1
WARNING: multiple messages have this Message-ID (diff)
From: ilialin@codeaurora.org (Ilia Lin)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 11/11] DT: QCOM: Add thermal mitigation to msm8996
Date: Thu, 4 Jan 2018 13:10:15 +0200 [thread overview]
Message-ID: <1515064215-22202-12-git-send-email-ilialin@codeaurora.org> (raw)
In-Reply-To: <1515064215-22202-1-git-send-email-ilialin@codeaurora.org>
Add thermal mitigation configuration to msm8996.
With the cpufreq-dt OPP table the CPU frequency may be
scaled and therefore throttled by the thermal config.
Signed-off-by: Ilia Lin <ilialin@codeaurora.org>
---
arch/arm64/boot/dts/qcom/msm8996.dtsi | 98 +++++++++++++++++++++++++++++++----
1 file changed, 87 insertions(+), 11 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index 8beea7e..6fa061f 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -14,6 +14,7 @@
#include <dt-bindings/clock/qcom,gcc-msm8996.h>
#include <dt-bindings/clock/qcom,mmcc-msm8996.h>
#include <dt-bindings/clock/qcom,rpmcc.h>
+#include <dt-bindings/thermal/thermal.h>
/ {
model = "Qualcomm Technologies, Inc. MSM8996";
@@ -88,6 +89,10 @@
enable-method = "psci";
clocks = <&kryocc 0>;
operating-points-v2 = <&cluster0_opp>;
+ /* cooling options */
+ cooling-min-level = <0>;
+ cooling-max-level = <15>;
+ #cooling-cells = <2>;
next-level-cache = <&L2_0>;
L2_0: l2-cache {
compatible = "cache";
@@ -102,6 +107,10 @@
enable-method = "psci";
clocks = <&kryocc 0>;
operating-points-v2 = <&cluster0_opp>;
+ /* cooling options */
+ cooling-min-level = <0>;
+ cooling-max-level = <15>;
+ #cooling-cells = <2>;
next-level-cache = <&L2_0>;
};
@@ -112,6 +121,10 @@
enable-method = "psci";
clocks = <&kryocc 1>;
operating-points-v2 = <&cluster1_opp>;
+ /* cooling options */
+ cooling-min-level = <0>;
+ cooling-max-level = <15>;
+ #cooling-cells = <2>;
next-level-cache = <&L2_1>;
L2_1: l2-cache {
compatible = "cache";
@@ -126,6 +139,10 @@
enable-method = "psci";
clocks = <&kryocc 1>;
operating-points-v2 = <&cluster1_opp>;
+ /* cooling options */
+ cooling-min-level = <0>;
+ cooling-max-level = <15>;
+ #cooling-cells = <2>;
next-level-cache = <&L2_1>;
};
@@ -336,18 +353,33 @@
thermal-sensors = <&tsens0 3>;
trips {
- cpu_alert0: trip0 {
+ cpu_alert0: cpu_alert0 {
temperature = <75000>;
hysteresis = <2000>;
+ type = "active";
+ };
+ cpu_warn0: cpu_warn0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
type = "passive";
};
-
- cpu_crit0: trip1 {
+ cpu_crit0: cpu_crit0 {
temperature = <110000>;
hysteresis = <2000>;
type = "critical";
};
};
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu_alert0>;
+ cooling-device = <&CPU0 THERMAL_NO_LIMIT 7>;
+ };
+ map1 {
+ trip = <&cpu_warn0>;
+ cooling-device = <&CPU0 8 THERMAL_NO_LIMIT>;
+ };
+ };
};
cpu-thermal1 {
@@ -357,18 +389,33 @@
thermal-sensors = <&tsens0 5>;
trips {
- cpu_alert1: trip0 {
+ cpu_alert1: cpu_alert1 {
temperature = <75000>;
hysteresis = <2000>;
+ type = "active";
+ };
+ cpu_warn1: cpu_warn1 {
+ temperature = <90000>;
+ hysteresis = <2000>;
type = "passive";
};
-
- cpu_crit1: trip1 {
+ cpu_crit1: cpu_crit1 {
temperature = <110000>;
hysteresis = <2000>;
type = "critical";
};
};
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu_alert1>;
+ cooling-device = <&CPU0 THERMAL_NO_LIMIT 7>;
+ };
+ map1 {
+ trip = <&cpu_warn1>;
+ cooling-device = <&CPU0 8 THERMAL_NO_LIMIT>;
+ };
+ };
};
cpu-thermal2 {
@@ -378,18 +425,32 @@
thermal-sensors = <&tsens0 8>;
trips {
- cpu_alert2: trip0 {
+ cpu_alert2: cpu_alert2 {
temperature = <75000>;
hysteresis = <2000>;
+ type = "active";
+ };
+ cpu_warn2: cpu_warn2 {
+ temperature = <90000>;
+ hysteresis = <2000>;
type = "passive";
};
-
- cpu_crit2: trip1 {
+ cpu_crit2: cpu_crit2 {
temperature = <110000>;
hysteresis = <2000>;
type = "critical";
};
};
+ cooling-maps {
+ map0 {
+ trip = <&cpu_alert2>;
+ cooling-device = <&CPU2 THERMAL_NO_LIMIT 7>;
+ };
+ map1 {
+ trip = <&cpu_warn2>;
+ cooling-device = <&CPU2 8 THERMAL_NO_LIMIT>;
+ };
+ };
};
cpu-thermal3 {
@@ -399,18 +460,33 @@
thermal-sensors = <&tsens0 10>;
trips {
- cpu_alert3: trip0 {
+ cpu_alert3: cpu_alert3 {
temperature = <75000>;
hysteresis = <2000>;
+ type = "active";
+ };
+ cpu_warn3: cpu_warn3 {
+ temperature = <90000>;
+ hysteresis = <2000>;
type = "passive";
};
-
cpu_crit3: trip1 {
temperature = <110000>;
hysteresis = <2000>;
type = "critical";
};
};
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu_alert3>;
+ cooling-device = <&CPU2 THERMAL_NO_LIMIT 7>;
+ };
+ map1 {
+ trip = <&cpu_warn3>;
+ cooling-device = <&CPU2 8 THERMAL_NO_LIMIT>;
+ };
+ };
};
};
--
1.9.1
next prev parent reply other threads:[~2018-01-04 11:10 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-01-04 11:10 [PATCH v2 00/11] clk: qcom: CPU clock driver for msm8996 Ilia Lin
2018-01-04 11:10 ` Ilia Lin
[not found] ` <1515064215-22202-1-git-send-email-ilialin-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2018-01-04 11:10 ` [PATCH v2 01/11] soc: qcom: Separate kryo l2 accessors from PMU driver Ilia Lin
2018-01-04 11:10 ` Ilia Lin
2018-01-04 11:10 ` Ilia Lin
2018-01-04 11:10 ` [PATCH v2 03/11] clk: qcom: Make clk_alpha_pll_configure available to modules Ilia Lin
2018-01-04 11:10 ` Ilia Lin
2018-01-04 11:10 ` Ilia Lin
2018-01-04 11:10 ` [PATCH v2 07/11] clk: qcom: cpu-8996: Add support to switch below 600Mhz Ilia Lin
2018-01-04 11:10 ` Ilia Lin
2018-01-04 11:10 ` Ilia Lin
2018-01-04 11:10 ` [PATCH v2 08/11] clk: qcom: clk-cpu-8996: Prepare PLLs on probe Ilia Lin
2018-01-04 11:10 ` Ilia Lin
2018-01-04 11:10 ` Ilia Lin
2018-01-04 11:10 ` [PATCH v2 02/11] clk: qcom: Fix .set_rate to handle alpha PLLs w/wo dynamic update Ilia Lin
2018-01-04 11:10 ` Ilia Lin
2018-01-04 11:10 ` [PATCH v2 04/11] clk: qcom: Add CPU clock driver for msm8996 Ilia Lin
2018-01-04 11:10 ` Ilia Lin
2018-01-04 11:10 ` [PATCH v2 05/11] clk: qcom: Add DT bindings for " Ilia Lin
2018-01-04 11:10 ` Ilia Lin
2018-01-09 3:37 ` Rob Herring
2018-01-09 3:37 ` Rob Herring
2018-01-04 11:10 ` [PATCH v2 06/11] clk: qcom: cpu-8996: Add support to switch to alternate PLL Ilia Lin
2018-01-04 11:10 ` Ilia Lin
2018-01-04 11:10 ` [PATCH v2 09/11] clk: qcom: Add ACD path to CPU clock driver for msm8996 Ilia Lin
2018-01-04 11:10 ` Ilia Lin
2018-01-04 11:10 ` [PATCH v2 10/11] DT: QCOM: Add cpufreq-dt to msm8996 Ilia Lin
2018-01-04 11:10 ` Ilia Lin
2018-01-04 11:10 ` Ilia Lin [this message]
2018-01-04 11:10 ` [PATCH v2 11/11] DT: QCOM: Add thermal mitigation " Ilia Lin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1515064215-22202-12-git-send-email-ilialin@codeaurora.org \
--to=ilialin@codeaurora.org \
--cc=amit.kucheria@linaro.org \
--cc=celster@codeaurora.org \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-clk@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=nicolas.dechesne@linaro.org \
--cc=rnayak@codeaurora.org \
--cc=sboyd@codeaurora.org \
--cc=tfinkel@codeaurora.org \
--cc=will.deacon@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.