From: Eric Auger <eric.auger@redhat.com>
To: eric.auger.pro@gmail.com, eric.auger@redhat.com,
peter.maydell@linaro.org, alex.williamson@redhat.com,
mst@redhat.com, qemu-arm@nongnu.org, qemu-devel@nongnu.org,
jean-philippe.brucker@arm.com
Cc: kevin.tian@intel.com, marc.zyngier@arm.com, tn@semihalf.com,
will.deacon@arm.com, drjones@redhat.com, peterx@redhat.com,
linuc.decode@gmail.com, bharat.bhushan@nxp.com,
christoffer.dall@linaro.org
Subject: [Qemu-arm] [RFC v5 12/22] virtio-iommu: Implement translate
Date: Fri, 19 Jan 2018 14:49:05 +0000 [thread overview]
Message-ID: <1516373355-305-13-git-send-email-eric.auger@redhat.com> (raw)
In-Reply-To: <1516373355-305-1-git-send-email-eric.auger@redhat.com>
This patch implements the translate callback
Signed-off-by: Eric Auger <eric.auger@redhat.com>
---
v4 -> v5:
- check the device domain is not NULL
- s/printf/error_report
- set flags to IOMMU_NONE in case of all translation faults
---
hw/virtio/trace-events | 1 +
hw/virtio/virtio-iommu.c | 42 +++++++++++++++++++++++++++++++++++++++++-
2 files changed, 42 insertions(+), 1 deletion(-)
diff --git a/hw/virtio/trace-events b/hw/virtio/trace-events
index 3ce9b82..873e4fc 100644
--- a/hw/virtio/trace-events
+++ b/hw/virtio/trace-events
@@ -45,3 +45,4 @@ virtio_iommu_put_domain(uint32_t domain_id) "Free domain=%d"
virtio_iommu_unmap_left_interval(uint64_t low, uint64_t high, uint64_t next_low, uint64_t next_high) "Unmap left [0x%"PRIx64",0x%"PRIx64"], new interval=[0x%"PRIx64",0x%"PRIx64"]"
virtio_iommu_unmap_right_interval(uint64_t low, uint64_t high, uint64_t next_low, uint64_t next_high) "Unmap right [0x%"PRIx64",0x%"PRIx64"], new interval=[0x%"PRIx64",0x%"PRIx64"]"
virtio_iommu_unmap_inc_interval(uint64_t low, uint64_t high) "Unmap inc [0x%"PRIx64",0x%"PRIx64"]"
+virtio_iommu_translate_out(uint64_t virt_addr, uint64_t phys_addr, uint32_t sid) "0x%"PRIx64" -> 0x%"PRIx64 " for sid=%d"
diff --git a/hw/virtio/virtio-iommu.c b/hw/virtio/virtio-iommu.c
index f530eca..c96aacc 100644
--- a/hw/virtio/virtio-iommu.c
+++ b/hw/virtio/virtio-iommu.c
@@ -485,19 +485,59 @@ static IOMMUTLBEntry virtio_iommu_translate(IOMMUMemoryRegion *mr, hwaddr addr,
IOMMUAccessFlags flag)
{
IOMMUDevice *sdev = container_of(mr, IOMMUDevice, iommu_mr);
+ VirtIOIOMMU *s = sdev->viommu;
uint32_t sid;
+ viommu_endpoint *ep;
+ viommu_mapping *mapping;
+ viommu_interval interval;
+
+ interval.low = addr;
+ interval.high = addr + 1;
IOMMUTLBEntry entry = {
.target_as = &address_space_memory,
.iova = addr,
.translated_addr = addr,
- .addr_mask = ~(hwaddr)0,
+ .addr_mask = (1 << ctz32(s->config.page_size_mask)) - 1,
.perm = IOMMU_NONE,
};
sid = virtio_iommu_get_sid(sdev);
trace_virtio_iommu_translate(mr->parent_obj.name, sid, addr, flag);
+ qemu_mutex_lock(&s->mutex);
+
+ ep = g_tree_lookup(s->endpoints, GUINT_TO_POINTER(sid));
+ if (!ep) {
+ error_report("%s sid=%d is not known!!", __func__, sid);
+ goto unlock;
+ }
+
+ if (!ep->domain) {
+ error_report("%s %02x:%02x.%01x not attached to any domain", __func__,
+ PCI_BUS_NUM(sid), PCI_SLOT(sid), PCI_FUNC(sid));
+ goto unlock;
+ }
+
+ mapping = g_tree_lookup(ep->domain->mappings, (gpointer)(&interval));
+ if (!mapping) {
+ error_report("%s no mapping for 0x%"PRIx64" for sid=%d", __func__,
+ addr, sid);
+ goto unlock;
+ }
+
+ if (((flag & IOMMU_RO) && !(mapping->flags & VIRTIO_IOMMU_MAP_F_READ)) ||
+ ((flag & IOMMU_WO) && !(mapping->flags & VIRTIO_IOMMU_MAP_F_WRITE))) {
+ error_report("Permission error on 0x%"PRIx64"(%d): allowed=%d",
+ addr, flag, mapping->flags);
+ goto unlock;
+ }
+ entry.translated_addr = addr - mapping->virt_addr + mapping->phys_addr;
+ entry.perm = flag;
+ trace_virtio_iommu_translate_out(addr, entry.translated_addr, sid);
+
+unlock:
+ qemu_mutex_unlock(&s->mutex);
return entry;
}
--
1.9.1
WARNING: multiple messages have this Message-ID (diff)
From: Eric Auger <eric.auger@redhat.com>
To: eric.auger.pro@gmail.com, eric.auger@redhat.com,
peter.maydell@linaro.org, alex.williamson@redhat.com,
mst@redhat.com, qemu-arm@nongnu.org, qemu-devel@nongnu.org,
jean-philippe.brucker@arm.com
Cc: will.deacon@arm.com, kevin.tian@intel.com, marc.zyngier@arm.com,
christoffer.dall@linaro.org, drjones@redhat.com, wei@redhat.com,
tn@semihalf.com, bharat.bhushan@nxp.com, peterx@redhat.com,
linuc.decode@gmail.com
Subject: [Qemu-devel] [RFC v5 12/22] virtio-iommu: Implement translate
Date: Fri, 19 Jan 2018 14:49:05 +0000 [thread overview]
Message-ID: <1516373355-305-13-git-send-email-eric.auger@redhat.com> (raw)
In-Reply-To: <1516373355-305-1-git-send-email-eric.auger@redhat.com>
This patch implements the translate callback
Signed-off-by: Eric Auger <eric.auger@redhat.com>
---
v4 -> v5:
- check the device domain is not NULL
- s/printf/error_report
- set flags to IOMMU_NONE in case of all translation faults
---
hw/virtio/trace-events | 1 +
hw/virtio/virtio-iommu.c | 42 +++++++++++++++++++++++++++++++++++++++++-
2 files changed, 42 insertions(+), 1 deletion(-)
diff --git a/hw/virtio/trace-events b/hw/virtio/trace-events
index 3ce9b82..873e4fc 100644
--- a/hw/virtio/trace-events
+++ b/hw/virtio/trace-events
@@ -45,3 +45,4 @@ virtio_iommu_put_domain(uint32_t domain_id) "Free domain=%d"
virtio_iommu_unmap_left_interval(uint64_t low, uint64_t high, uint64_t next_low, uint64_t next_high) "Unmap left [0x%"PRIx64",0x%"PRIx64"], new interval=[0x%"PRIx64",0x%"PRIx64"]"
virtio_iommu_unmap_right_interval(uint64_t low, uint64_t high, uint64_t next_low, uint64_t next_high) "Unmap right [0x%"PRIx64",0x%"PRIx64"], new interval=[0x%"PRIx64",0x%"PRIx64"]"
virtio_iommu_unmap_inc_interval(uint64_t low, uint64_t high) "Unmap inc [0x%"PRIx64",0x%"PRIx64"]"
+virtio_iommu_translate_out(uint64_t virt_addr, uint64_t phys_addr, uint32_t sid) "0x%"PRIx64" -> 0x%"PRIx64 " for sid=%d"
diff --git a/hw/virtio/virtio-iommu.c b/hw/virtio/virtio-iommu.c
index f530eca..c96aacc 100644
--- a/hw/virtio/virtio-iommu.c
+++ b/hw/virtio/virtio-iommu.c
@@ -485,19 +485,59 @@ static IOMMUTLBEntry virtio_iommu_translate(IOMMUMemoryRegion *mr, hwaddr addr,
IOMMUAccessFlags flag)
{
IOMMUDevice *sdev = container_of(mr, IOMMUDevice, iommu_mr);
+ VirtIOIOMMU *s = sdev->viommu;
uint32_t sid;
+ viommu_endpoint *ep;
+ viommu_mapping *mapping;
+ viommu_interval interval;
+
+ interval.low = addr;
+ interval.high = addr + 1;
IOMMUTLBEntry entry = {
.target_as = &address_space_memory,
.iova = addr,
.translated_addr = addr,
- .addr_mask = ~(hwaddr)0,
+ .addr_mask = (1 << ctz32(s->config.page_size_mask)) - 1,
.perm = IOMMU_NONE,
};
sid = virtio_iommu_get_sid(sdev);
trace_virtio_iommu_translate(mr->parent_obj.name, sid, addr, flag);
+ qemu_mutex_lock(&s->mutex);
+
+ ep = g_tree_lookup(s->endpoints, GUINT_TO_POINTER(sid));
+ if (!ep) {
+ error_report("%s sid=%d is not known!!", __func__, sid);
+ goto unlock;
+ }
+
+ if (!ep->domain) {
+ error_report("%s %02x:%02x.%01x not attached to any domain", __func__,
+ PCI_BUS_NUM(sid), PCI_SLOT(sid), PCI_FUNC(sid));
+ goto unlock;
+ }
+
+ mapping = g_tree_lookup(ep->domain->mappings, (gpointer)(&interval));
+ if (!mapping) {
+ error_report("%s no mapping for 0x%"PRIx64" for sid=%d", __func__,
+ addr, sid);
+ goto unlock;
+ }
+
+ if (((flag & IOMMU_RO) && !(mapping->flags & VIRTIO_IOMMU_MAP_F_READ)) ||
+ ((flag & IOMMU_WO) && !(mapping->flags & VIRTIO_IOMMU_MAP_F_WRITE))) {
+ error_report("Permission error on 0x%"PRIx64"(%d): allowed=%d",
+ addr, flag, mapping->flags);
+ goto unlock;
+ }
+ entry.translated_addr = addr - mapping->virt_addr + mapping->phys_addr;
+ entry.perm = flag;
+ trace_virtio_iommu_translate_out(addr, entry.translated_addr, sid);
+
+unlock:
+ qemu_mutex_unlock(&s->mutex);
return entry;
}
--
1.9.1
next prev parent reply other threads:[~2018-01-19 15:03 UTC|newest]
Thread overview: 46+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-01-19 14:48 [Qemu-arm] [RFC v5 00/22] VIRTIO-IOMMU device Eric Auger
2018-01-19 14:48 ` [Qemu-devel] " Eric Auger
2018-01-19 14:48 ` [Qemu-devel] [RFC v5 01/22] machine: Add a get_primary_pci_bus callback Eric Auger
2018-01-19 14:48 ` Eric Auger
2018-01-19 14:48 ` [Qemu-arm] [RFC v5 02/22] hw/arm/virt: Implement get_primary_pci_bus Eric Auger
2018-01-19 14:48 ` [Qemu-devel] " Eric Auger
2018-01-19 14:48 ` [Qemu-arm] [RFC v5 03/22] pc: " Eric Auger
2018-01-19 14:48 ` [Qemu-devel] " Eric Auger
2018-01-19 14:48 ` [Qemu-arm] [RFC v5 04/22] update-linux-headers: Import virtio_iommu.h Eric Auger
2018-01-19 14:48 ` [Qemu-devel] " Eric Auger
2018-01-19 14:48 ` [Qemu-arm] [RFC v5 05/22] linux-headers: Partial update for virtio-iommu Eric Auger
2018-01-19 14:48 ` [Qemu-devel] " Eric Auger
2018-01-19 14:48 ` [Qemu-arm] [RFC v5 06/22] virtio-iommu: Add skeleton Eric Auger
2018-01-19 14:48 ` [Qemu-devel] " Eric Auger
2018-01-19 14:49 ` [Qemu-arm] [RFC v5 07/22] virtio-iommu: Decode the command payload Eric Auger
2018-01-19 14:49 ` [Qemu-devel] " Eric Auger
2018-01-19 14:49 ` [Qemu-devel] [RFC v5 08/22] virtio-iommu: Add the iommu regions Eric Auger
2018-01-19 14:49 ` Eric Auger
2018-01-19 14:49 ` [Qemu-devel] [RFC v5 09/22] virtio-iommu: Register attached endpoints Eric Auger
2018-01-19 14:49 ` Eric Auger
2018-01-19 14:49 ` [Qemu-arm] [RFC v5 10/22] virtio-iommu: Implement attach/detach command Eric Auger
2018-01-19 14:49 ` [Qemu-devel] " Eric Auger
2018-01-19 14:49 ` [Qemu-arm] [RFC v5 11/22] virtio-iommu: Implement map/unmap Eric Auger
2018-01-19 14:49 ` [Qemu-devel] " Eric Auger
2018-01-19 14:49 ` Eric Auger [this message]
2018-01-19 14:49 ` [Qemu-devel] [RFC v5 12/22] virtio-iommu: Implement translate Eric Auger
2018-01-19 14:49 ` [Qemu-devel] [RFC v5 13/22] virtio-iommu: Implement probe request Eric Auger
2018-01-19 14:49 ` Eric Auger
2018-01-19 14:49 ` [Qemu-arm] [RFC v5 14/22] virtio-iommu: Add an msi_bypass property Eric Auger
2018-01-19 14:49 ` [Qemu-devel] " Eric Auger
2018-01-19 14:49 ` [Qemu-devel] [RFC v5 15/22] virtio-iommu: Implement fault reporting Eric Auger
2018-01-19 14:49 ` Eric Auger
2018-01-19 14:49 ` [Qemu-arm] [RFC v5 16/22] virtio_iommu: Handle reserved regions in translation process Eric Auger
2018-01-19 14:49 ` [Qemu-devel] " Eric Auger
2018-01-19 14:49 ` [Qemu-arm] [RFC v5 17/22] hw/arm/virt: Add virtio-iommu to the virt board Eric Auger
2018-01-19 14:49 ` [Qemu-devel] " Eric Auger
2018-01-19 14:49 ` [Qemu-arm] [RFC v5 18/22] hw/arm/virt-acpi-build: Add virtio-iommu node in IORT table Eric Auger
2018-01-19 14:49 ` [Qemu-devel] " Eric Auger
2018-01-19 14:49 ` [Qemu-arm] [RFC v5 19/22] memory.h: Add set_page_size_mask IOMMUMemoryRegion callback Eric Auger
2018-01-19 14:49 ` [Qemu-devel] " Eric Auger
2018-01-19 14:49 ` [Qemu-arm] [RFC v5 20/22] hw/vfio/common: Set the IOMMUMemoryRegion supported page sizes Eric Auger
2018-01-19 14:49 ` [Qemu-devel] " Eric Auger
2018-01-19 14:49 ` [Qemu-arm] [RFC v5 21/22] virtio-iommu: Implement set_page_size_mask Eric Auger
2018-01-19 14:49 ` [Qemu-devel] " Eric Auger
2018-01-19 14:49 ` [Qemu-devel] [RFC v5 22/22] hw/vfio/common: Do not print error when viommu translates into an mmio region Eric Auger
2018-01-19 14:49 ` Eric Auger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1516373355-305-13-git-send-email-eric.auger@redhat.com \
--to=eric.auger@redhat.com \
--cc=alex.williamson@redhat.com \
--cc=bharat.bhushan@nxp.com \
--cc=christoffer.dall@linaro.org \
--cc=drjones@redhat.com \
--cc=eric.auger.pro@gmail.com \
--cc=jean-philippe.brucker@arm.com \
--cc=kevin.tian@intel.com \
--cc=linuc.decode@gmail.com \
--cc=marc.zyngier@arm.com \
--cc=mst@redhat.com \
--cc=peter.maydell@linaro.org \
--cc=peterx@redhat.com \
--cc=qemu-arm@nongnu.org \
--cc=qemu-devel@nongnu.org \
--cc=tn@semihalf.com \
--cc=will.deacon@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.