From: Channagoud Kadabi <ckadabi@codeaurora.org>
To: linux-arm-kernel@lists.infradead.org, linux-arm-msm@vger.kernel.org
Cc: linux-arm@lists.infradead.org, linux-kernel@vger.kernel.org,
tsoni@codeaurora.org, sboyd@codeaurora.org, kyan@codeaurora.org,
Channagoud Kadabi <ckadabi@codeaurora.org>
Subject: [PATCH 1/2] dt-bindings: Documentation for qcom,llcc
Date: Thu, 25 Jan 2018 15:55:12 -0800 [thread overview]
Message-ID: <1516924513-20183-2-git-send-email-ckadabi@codeaurora.org> (raw)
In-Reply-To: <1516924513-20183-1-git-send-email-ckadabi@codeaurora.org>
Documentation for last level cache controller device tree bindings,
client bindings usage examples.
Signed-off-by: Channagoud Kadabi <ckadabi@codeaurora.org>
---
.../devicetree/bindings/arm/msm/qcom,llcc.txt | 93 ++++++++++++++++++++++
1 file changed, 93 insertions(+)
create mode 100644 Documentation/devicetree/bindings/arm/msm/qcom,llcc.txt
diff --git a/Documentation/devicetree/bindings/arm/msm/qcom,llcc.txt b/Documentation/devicetree/bindings/arm/msm/qcom,llcc.txt
new file mode 100644
index 0000000..d433b0c
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/msm/qcom,llcc.txt
@@ -0,0 +1,93 @@
+* LLCC (Last Level Cache Controller)
+
+Properties:
+- compatible:
+ Usage: required
+ Value type: <string>
+ Definition: must be "qcom,llcc-core"
+
+- reg:
+ Usage: required
+ Value Type: <prop-encoded-array>
+ Definition: must be addresses and sizes of the LLCC registers
+
+- llcc-bank-off:
+ Usage: required
+ Value Type: <u32 array>
+ Definition: Offsets of llcc banks from llcc base address starting from
+ LLCC bank0.
+
+- llcc-broadcast-off:
+ Usage: required
+ Value Type: <u32>
+ Definition: Offset of broadcast register from LLCC bank0 address.
+
+- #cache-cells:
+ Usage: required
+ Value Type: <u32>
+ Definition: Number of cache cells, must be 1
+
+- max-slices:
+ usage: required
+ Value Type: <u32>
+ Definition: Number of cache slices supported by hardware
+
+- status:
+ Usage: optional
+ Value type: <string>
+ Definition: Property to enable or disable the driver
+
+== llcc amon device ==
+
+Properties:
+-qcom,fg-cnt : The value of fine grained counter of activity monitor
+ block.
+
+compatible devices:
+ qcom,sdm845-llcc
+
+Example:
+
+ qcom,system-cache@1300000 {
+ compatible = "qcom,llcc-core", "syscon", "simple-mfd";
+ reg = <0x1300000 0x50000>;
+ reg-names = "llcc_base";
+
+ llcc: qcom,sdm845-llcc {
+ compatible = "qcom,sdm845-llcc";
+ #cache-cells = <1>;
+ max-slices = <32>;
+ };
+
+ qcom,llcc-ecc {
+ compatible = "qcom,llcc-ecc";
+ };
+
+ qcom,llcc-amon {
+ compatible = "qcom,llcc-amon";
+ qcom,fg-cnt = <0x7>;
+ };
+
+ };
+
+== Client ==
+
+Properties:
+- cache-slice-names:
+ Usage: required
+ Value type: <stringlist>
+ Definition: A set of names that identify the usecase names of a client that uses
+ cache slice. These strings are used to look up the cache slice
+ entries by name.
+
+- cache-slices:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: The tuple has phandle to llcc device as the first argument and the
+ second argument is the usecase id of the client.
+For example:
+
+ video-decoder-encoder {
+ cache-slice-names = "vidsc0", "vidsc1";
+ cache-slices = <&llcc 2>, <&llcc 3>;
+ };
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
WARNING: multiple messages have this Message-ID (diff)
From: ckadabi@codeaurora.org (Channagoud Kadabi)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/2] dt-bindings: Documentation for qcom,llcc
Date: Thu, 25 Jan 2018 15:55:12 -0800 [thread overview]
Message-ID: <1516924513-20183-2-git-send-email-ckadabi@codeaurora.org> (raw)
In-Reply-To: <1516924513-20183-1-git-send-email-ckadabi@codeaurora.org>
Documentation for last level cache controller device tree bindings,
client bindings usage examples.
Signed-off-by: Channagoud Kadabi <ckadabi@codeaurora.org>
---
.../devicetree/bindings/arm/msm/qcom,llcc.txt | 93 ++++++++++++++++++++++
1 file changed, 93 insertions(+)
create mode 100644 Documentation/devicetree/bindings/arm/msm/qcom,llcc.txt
diff --git a/Documentation/devicetree/bindings/arm/msm/qcom,llcc.txt b/Documentation/devicetree/bindings/arm/msm/qcom,llcc.txt
new file mode 100644
index 0000000..d433b0c
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/msm/qcom,llcc.txt
@@ -0,0 +1,93 @@
+* LLCC (Last Level Cache Controller)
+
+Properties:
+- compatible:
+ Usage: required
+ Value type: <string>
+ Definition: must be "qcom,llcc-core"
+
+- reg:
+ Usage: required
+ Value Type: <prop-encoded-array>
+ Definition: must be addresses and sizes of the LLCC registers
+
+- llcc-bank-off:
+ Usage: required
+ Value Type: <u32 array>
+ Definition: Offsets of llcc banks from llcc base address starting from
+ LLCC bank0.
+
+- llcc-broadcast-off:
+ Usage: required
+ Value Type: <u32>
+ Definition: Offset of broadcast register from LLCC bank0 address.
+
+- #cache-cells:
+ Usage: required
+ Value Type: <u32>
+ Definition: Number of cache cells, must be 1
+
+- max-slices:
+ usage: required
+ Value Type: <u32>
+ Definition: Number of cache slices supported by hardware
+
+- status:
+ Usage: optional
+ Value type: <string>
+ Definition: Property to enable or disable the driver
+
+== llcc amon device ==
+
+Properties:
+-qcom,fg-cnt : The value of fine grained counter of activity monitor
+ block.
+
+compatible devices:
+ qcom,sdm845-llcc
+
+Example:
+
+ qcom,system-cache at 1300000 {
+ compatible = "qcom,llcc-core", "syscon", "simple-mfd";
+ reg = <0x1300000 0x50000>;
+ reg-names = "llcc_base";
+
+ llcc: qcom,sdm845-llcc {
+ compatible = "qcom,sdm845-llcc";
+ #cache-cells = <1>;
+ max-slices = <32>;
+ };
+
+ qcom,llcc-ecc {
+ compatible = "qcom,llcc-ecc";
+ };
+
+ qcom,llcc-amon {
+ compatible = "qcom,llcc-amon";
+ qcom,fg-cnt = <0x7>;
+ };
+
+ };
+
+== Client ==
+
+Properties:
+- cache-slice-names:
+ Usage: required
+ Value type: <stringlist>
+ Definition: A set of names that identify the usecase names of a client that uses
+ cache slice. These strings are used to look up the cache slice
+ entries by name.
+
+- cache-slices:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: The tuple has phandle to llcc device as the first argument and the
+ second argument is the usecase id of the client.
+For example:
+
+ video-decoder-encoder {
+ cache-slice-names = "vidsc0", "vidsc1";
+ cache-slices = <&llcc 2>, <&llcc 3>;
+ };
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
next prev parent reply other threads:[~2018-01-25 23:55 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-01-25 23:55 [PATCH 0/2] SDM845 System Cache Driver Channagoud Kadabi
2018-01-25 23:55 ` Channagoud Kadabi
2018-01-25 23:55 ` Channagoud Kadabi [this message]
2018-01-25 23:55 ` [PATCH 1/2] dt-bindings: Documentation for qcom,llcc Channagoud Kadabi
2018-02-01 10:44 ` Mark Rutland
2018-02-01 10:44 ` Mark Rutland
2018-02-01 20:39 ` Channa
2018-02-01 20:39 ` Channa
2018-02-02 11:05 ` Mark Rutland
2018-02-02 11:05 ` Mark Rutland
2018-02-06 19:56 ` Channa
2018-02-06 19:56 ` Channa
2018-02-06 19:56 ` Channa
2018-02-13 14:37 ` Mark Rutland
2018-02-13 14:37 ` Mark Rutland
2018-02-13 17:38 ` Channa
2018-02-13 17:38 ` Channa
2018-02-01 10:48 ` Mark Rutland
2018-02-01 10:48 ` Mark Rutland
2018-02-01 20:47 ` Channa
2018-02-01 20:47 ` Channa
2018-02-01 20:47 ` Channa
2018-02-02 11:08 ` Mark Rutland
2018-02-02 11:08 ` Mark Rutland
2018-02-08 16:52 ` Matt Sealey
2018-02-08 16:52 ` Matt Sealey
2018-02-09 0:24 ` Channa
2018-02-09 0:24 ` Channa
2018-02-13 14:33 ` Mark Rutland
2018-02-13 14:33 ` Mark Rutland
2018-01-25 23:55 ` [PATCH 2/2] drivers: soc: Add LLCC driver Channagoud Kadabi
2018-01-25 23:55 ` Channagoud Kadabi
2018-03-19 14:55 ` Jordan Crouse
2018-03-19 14:55 ` Jordan Crouse
2018-03-23 23:57 ` Channa
2018-03-23 23:57 ` Channa
-- strict thread matches above, loose matches on Subject: below --
2018-01-16 22:35 [PATCH 0/2] SDM845 System Cache Driver Channagoud Kadabi
2018-01-16 22:35 ` [PATCH 1/2] dt-bindings: Documentation for qcom,llcc Channagoud Kadabi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1516924513-20183-2-git-send-email-ckadabi@codeaurora.org \
--to=ckadabi@codeaurora.org \
--cc=kyan@codeaurora.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-arm@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=sboyd@codeaurora.org \
--cc=tsoni@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.