Patch "mmc: sdhci-of-esdhc: disable SD clock for clock value 0" has been added to the 4.14-stable tree

Patch "mmc: sdhci-of-esdhc: disable SD clock for clock value 0" has been added to the 4.14-stable tree

[gregkh]

This is a note to let you know that I've just added the patch titled

    mmc: sdhci-of-esdhc: disable SD clock for clock value 0

to the 4.14-stable tree which can be found at:
    http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
     mmc-sdhci-of-esdhc-disable-sd-clock-for-clock-value-0.patch
and it can be found in the queue-4.14 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@vger.kernel.org> know about it.


>From dd3f6983b4a468efca9e8caa0e2b4aa20946d801 Mon Sep 17 00:00:00 2001
From: yangbo lu <yangbo.lu@nxp.com>
Date: Thu, 21 Sep 2017 16:43:31 +0800
Subject: mmc: sdhci-of-esdhc: disable SD clock for clock value 0

From: yangbo lu <yangbo.lu@nxp.com>

commit dd3f6983b4a468efca9e8caa0e2b4aa20946d801 upstream.

SD clock should be disabled for clock value 0. It's not
right to just return. This may cause failure of signal
voltage switching.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/mmc/host/sdhci-of-esdhc.c |   58 +++++++++++++++++++-------------------
 1 file changed, 30 insertions(+), 28 deletions(-)

--- a/drivers/mmc/host/sdhci-of-esdhc.c
+++ b/drivers/mmc/host/sdhci-of-esdhc.c
@@ -458,6 +458,33 @@ static unsigned int esdhc_of_get_min_clo
 	return clock / 256 / 16;
 }
 
+static void esdhc_clock_enable(struct sdhci_host *host, bool enable)
+{
+	u32 val;
+	ktime_t timeout;
+
+	val = sdhci_readl(host, ESDHC_SYSTEM_CONTROL);
+
+	if (enable)
+		val |= ESDHC_CLOCK_SDCLKEN;
+	else
+		val &= ~ESDHC_CLOCK_SDCLKEN;
+
+	sdhci_writel(host, val, ESDHC_SYSTEM_CONTROL);
+
+	/* Wait max 20 ms */
+	timeout = ktime_add_ms(ktime_get(), 20);
+	val = ESDHC_CLOCK_STABLE;
+	while (!(sdhci_readl(host, ESDHC_PRSSTAT) & val)) {
+		if (ktime_after(ktime_get(), timeout)) {
+			pr_err("%s: Internal clock never stabilised.\n",
+				mmc_hostname(host->mmc));
+			break;
+		}
+		udelay(10);
+	}
+}
+
 static void esdhc_of_set_clock(struct sdhci_host *host, unsigned int clock)
 {
 	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
@@ -469,8 +496,10 @@ static void esdhc_of_set_clock(struct sd
 
 	host->mmc->actual_clock = 0;
 
-	if (clock == 0)
+	if (clock == 0) {
+		esdhc_clock_enable(host, false);
 		return;
+	}
 
 	/* Workaround to start pre_div at 2 for VNN < VENDOR_V_23 */
 	if (esdhc->vendor_ver < VENDOR_V_23)
@@ -558,33 +587,6 @@ static void esdhc_pltfm_set_bus_width(st
 	sdhci_writel(host, ctrl, ESDHC_PROCTL);
 }
 
-static void esdhc_clock_enable(struct sdhci_host *host, bool enable)
-{
-	u32 val;
-	ktime_t timeout;
-
-	val = sdhci_readl(host, ESDHC_SYSTEM_CONTROL);
-
-	if (enable)
-		val |= ESDHC_CLOCK_SDCLKEN;
-	else
-		val &= ~ESDHC_CLOCK_SDCLKEN;
-
-	sdhci_writel(host, val, ESDHC_SYSTEM_CONTROL);
-
-	/* Wait max 20 ms */
-	timeout = ktime_add_ms(ktime_get(), 20);
-	val = ESDHC_CLOCK_STABLE;
-	while (!(sdhci_readl(host, ESDHC_PRSSTAT) & val)) {
-		if (ktime_after(ktime_get(), timeout)) {
-			pr_err("%s: Internal clock never stabilised.\n",
-				mmc_hostname(host->mmc));
-			break;
-		}
-		udelay(10);
-	}
-}
-
 static void esdhc_reset(struct sdhci_host *host, u8 mask)
 {
 	sdhci_reset(host, mask);


Patches currently in stable-queue which might be from yangbo.lu@nxp.com are

queue-4.14/mmc-sdhci-of-esdhc-fix-the-mmc-error-after-sleep-on-ls1046ardb.patch
queue-4.14/mmc-sdhci-of-esdhc-disable-sd-clock-for-clock-value-0.patch