All of lore.kernel.org
 help / color / mirror / Atom feed
From: Sricharan R <sricharan@codeaurora.org>
To: viresh.kumar@linaro.org, robh+dt@kernel.org,
	mark.rutland@arm.com, mturquette@baylibre.com,
	sboyd@codeaurora.org, linux@armlinux.org.uk,
	andy.gross@linaro.org, david.brown@linaro.org, rjw@rjwysocki.net,
	linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, linux-clk@vger.kernel.org,
	linux-arm-msm@vger.kernel.org, linux-soc@vger.kernel.org,
	linux-pm@vger.kernel.org, robh@kernel.org,
	sricharan@codeaurora.org, linux@arm.linux.org.uk
Subject: [PATCH v8 07/15] clk: qcom: Add IPQ806X's HFPLLs
Date: Tue, 27 Feb 2018 19:36:54 +0530	[thread overview]
Message-ID: <1519740422-3835-8-git-send-email-sricharan@codeaurora.org> (raw)
In-Reply-To: <1519740422-3835-1-git-send-email-sricharan@codeaurora.org>

From: Stephen Boyd <sboyd@codeaurora.org>

Describe the HFPLLs present on IPQ806X devices.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
---
 drivers/clk/qcom/gcc-ipq806x.c | 82 ++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 82 insertions(+)

diff --git a/drivers/clk/qcom/gcc-ipq806x.c b/drivers/clk/qcom/gcc-ipq806x.c
index 28eb200..d571cf8 100644
--- a/drivers/clk/qcom/gcc-ipq806x.c
+++ b/drivers/clk/qcom/gcc-ipq806x.c
@@ -30,6 +30,7 @@
 #include "clk-pll.h"
 #include "clk-rcg.h"
 #include "clk-branch.h"
+#include "clk-hfpll.h"
 #include "reset.h"
 
 static struct clk_pll pll0 = {
@@ -113,6 +114,84 @@
 	},
 };
 
+static struct hfpll_data hfpll0_data = {
+	.mode_reg = 0x3200,
+	.l_reg = 0x3208,
+	.m_reg = 0x320c,
+	.n_reg = 0x3210,
+	.config_reg = 0x3204,
+	.status_reg = 0x321c,
+	.config_val = 0x7845c665,
+	.droop_reg = 0x3214,
+	.droop_val = 0x0108c000,
+	.min_rate = 600000000UL,
+	.max_rate = 1800000000UL,
+};
+
+static struct clk_hfpll hfpll0 = {
+	.d = &hfpll0_data,
+	.clkr.hw.init = &(struct clk_init_data){
+		.parent_names = (const char *[]){ "pxo" },
+		.num_parents = 1,
+		.name = "hfpll0",
+		.ops = &clk_ops_hfpll,
+		.flags = CLK_IGNORE_UNUSED,
+	},
+	.lock = __SPIN_LOCK_UNLOCKED(hfpll0.lock),
+};
+
+static struct hfpll_data hfpll1_data = {
+	.mode_reg = 0x3240,
+	.l_reg = 0x3248,
+	.m_reg = 0x324c,
+	.n_reg = 0x3250,
+	.config_reg = 0x3244,
+	.status_reg = 0x325c,
+	.config_val = 0x7845c665,
+	.droop_reg = 0x3314,
+	.droop_val = 0x0108c000,
+	.min_rate = 600000000UL,
+	.max_rate = 1800000000UL,
+};
+
+static struct clk_hfpll hfpll1 = {
+	.d = &hfpll1_data,
+	.clkr.hw.init = &(struct clk_init_data){
+		.parent_names = (const char *[]){ "pxo" },
+		.num_parents = 1,
+		.name = "hfpll1",
+		.ops = &clk_ops_hfpll,
+		.flags = CLK_IGNORE_UNUSED,
+	},
+	.lock = __SPIN_LOCK_UNLOCKED(hfpll1.lock),
+};
+
+static struct hfpll_data hfpll_l2_data = {
+	.mode_reg = 0x3300,
+	.l_reg = 0x3308,
+	.m_reg = 0x330c,
+	.n_reg = 0x3310,
+	.config_reg = 0x3304,
+	.status_reg = 0x331c,
+	.config_val = 0x7845c665,
+	.droop_reg = 0x3314,
+	.droop_val = 0x0108c000,
+	.min_rate = 600000000UL,
+	.max_rate = 1800000000UL,
+};
+
+static struct clk_hfpll hfpll_l2 = {
+	.d = &hfpll_l2_data,
+	.clkr.hw.init = &(struct clk_init_data){
+		.parent_names = (const char *[]){ "pxo" },
+		.num_parents = 1,
+		.name = "hfpll_l2",
+		.ops = &clk_ops_hfpll,
+		.flags = CLK_IGNORE_UNUSED,
+	},
+	.lock = __SPIN_LOCK_UNLOCKED(hfpll_l2.lock),
+};
+
 static struct clk_pll pll14 = {
 	.l_reg = 0x31c4,
 	.m_reg = 0x31c8,
@@ -2800,6 +2879,9 @@ enum {
 	[UBI32_CORE2_CLK_SRC] = &ubi32_core2_src_clk.clkr,
 	[NSSTCM_CLK_SRC] = &nss_tcm_src.clkr,
 	[NSSTCM_CLK] = &nss_tcm_clk.clkr,
+	[PLL9] = &hfpll0.clkr,
+	[PLL10] = &hfpll1.clkr,
+	[PLL12] = &hfpll_l2.clkr,
 };
 
 static const struct qcom_reset_map gcc_ipq806x_resets[] = {
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation

WARNING: multiple messages have this Message-ID (diff)
From: sricharan@codeaurora.org (Sricharan R)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v8 07/15] clk: qcom: Add IPQ806X's HFPLLs
Date: Tue, 27 Feb 2018 19:36:54 +0530	[thread overview]
Message-ID: <1519740422-3835-8-git-send-email-sricharan@codeaurora.org> (raw)
In-Reply-To: <1519740422-3835-1-git-send-email-sricharan@codeaurora.org>

From: Stephen Boyd <sboyd@codeaurora.org>

Describe the HFPLLs present on IPQ806X devices.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
---
 drivers/clk/qcom/gcc-ipq806x.c | 82 ++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 82 insertions(+)

diff --git a/drivers/clk/qcom/gcc-ipq806x.c b/drivers/clk/qcom/gcc-ipq806x.c
index 28eb200..d571cf8 100644
--- a/drivers/clk/qcom/gcc-ipq806x.c
+++ b/drivers/clk/qcom/gcc-ipq806x.c
@@ -30,6 +30,7 @@
 #include "clk-pll.h"
 #include "clk-rcg.h"
 #include "clk-branch.h"
+#include "clk-hfpll.h"
 #include "reset.h"
 
 static struct clk_pll pll0 = {
@@ -113,6 +114,84 @@
 	},
 };
 
+static struct hfpll_data hfpll0_data = {
+	.mode_reg = 0x3200,
+	.l_reg = 0x3208,
+	.m_reg = 0x320c,
+	.n_reg = 0x3210,
+	.config_reg = 0x3204,
+	.status_reg = 0x321c,
+	.config_val = 0x7845c665,
+	.droop_reg = 0x3214,
+	.droop_val = 0x0108c000,
+	.min_rate = 600000000UL,
+	.max_rate = 1800000000UL,
+};
+
+static struct clk_hfpll hfpll0 = {
+	.d = &hfpll0_data,
+	.clkr.hw.init = &(struct clk_init_data){
+		.parent_names = (const char *[]){ "pxo" },
+		.num_parents = 1,
+		.name = "hfpll0",
+		.ops = &clk_ops_hfpll,
+		.flags = CLK_IGNORE_UNUSED,
+	},
+	.lock = __SPIN_LOCK_UNLOCKED(hfpll0.lock),
+};
+
+static struct hfpll_data hfpll1_data = {
+	.mode_reg = 0x3240,
+	.l_reg = 0x3248,
+	.m_reg = 0x324c,
+	.n_reg = 0x3250,
+	.config_reg = 0x3244,
+	.status_reg = 0x325c,
+	.config_val = 0x7845c665,
+	.droop_reg = 0x3314,
+	.droop_val = 0x0108c000,
+	.min_rate = 600000000UL,
+	.max_rate = 1800000000UL,
+};
+
+static struct clk_hfpll hfpll1 = {
+	.d = &hfpll1_data,
+	.clkr.hw.init = &(struct clk_init_data){
+		.parent_names = (const char *[]){ "pxo" },
+		.num_parents = 1,
+		.name = "hfpll1",
+		.ops = &clk_ops_hfpll,
+		.flags = CLK_IGNORE_UNUSED,
+	},
+	.lock = __SPIN_LOCK_UNLOCKED(hfpll1.lock),
+};
+
+static struct hfpll_data hfpll_l2_data = {
+	.mode_reg = 0x3300,
+	.l_reg = 0x3308,
+	.m_reg = 0x330c,
+	.n_reg = 0x3310,
+	.config_reg = 0x3304,
+	.status_reg = 0x331c,
+	.config_val = 0x7845c665,
+	.droop_reg = 0x3314,
+	.droop_val = 0x0108c000,
+	.min_rate = 600000000UL,
+	.max_rate = 1800000000UL,
+};
+
+static struct clk_hfpll hfpll_l2 = {
+	.d = &hfpll_l2_data,
+	.clkr.hw.init = &(struct clk_init_data){
+		.parent_names = (const char *[]){ "pxo" },
+		.num_parents = 1,
+		.name = "hfpll_l2",
+		.ops = &clk_ops_hfpll,
+		.flags = CLK_IGNORE_UNUSED,
+	},
+	.lock = __SPIN_LOCK_UNLOCKED(hfpll_l2.lock),
+};
+
 static struct clk_pll pll14 = {
 	.l_reg = 0x31c4,
 	.m_reg = 0x31c8,
@@ -2800,6 +2879,9 @@ enum {
 	[UBI32_CORE2_CLK_SRC] = &ubi32_core2_src_clk.clkr,
 	[NSSTCM_CLK_SRC] = &nss_tcm_src.clkr,
 	[NSSTCM_CLK] = &nss_tcm_clk.clkr,
+	[PLL9] = &hfpll0.clkr,
+	[PLL10] = &hfpll1.clkr,
+	[PLL12] = &hfpll_l2.clkr,
 };
 
 static const struct qcom_reset_map gcc_ipq806x_resets[] = {
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation

  parent reply	other threads:[~2018-02-27 14:06 UTC|newest]

Thread overview: 47+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-02-27 14:06 [PATCH v8 00/15] Krait clocks + Krait CPUfreq Sricharan R
2018-02-27 14:06 ` Sricharan R
2018-02-27 14:06 ` [PATCH v8 01/15] ARM: Add Krait L2 register accessor functions Sricharan R
2018-02-27 14:06   ` Sricharan R
2018-02-27 14:06 ` [PATCH v8 02/15] clk: mux: Split out register accessors for reuse Sricharan R
2018-02-27 14:06   ` Sricharan R
2018-02-27 14:06 ` [PATCH v8 03/15] clk: qcom: Add support for High-Frequency PLLs (HFPLLs) Sricharan R
2018-02-27 14:06   ` Sricharan R
2018-02-27 14:06 ` [PATCH v8 04/15] clk: qcom: Add HFPLL driver Sricharan R
2018-02-27 14:06   ` Sricharan R
2018-02-27 14:06 ` [PATCH v8 05/15] dt-bindings: clock: Document qcom,hfpll Sricharan R
2018-02-27 14:06   ` Sricharan R
2018-02-27 14:06 ` [PATCH v8 06/15] clk: qcom: Add MSM8960/APQ8064's HFPLLs Sricharan R
2018-02-27 14:06   ` Sricharan R
2018-02-27 14:06 ` Sricharan R [this message]
2018-02-27 14:06   ` [PATCH v8 07/15] clk: qcom: Add IPQ806X's HFPLLs Sricharan R
2018-02-27 14:06 ` [PATCH v8 08/15] clk: qcom: Add support for Krait clocks Sricharan R
2018-02-27 14:06   ` Sricharan R
2018-02-27 14:06 ` [PATCH v8 09/15] clk: qcom: Add KPSS ACC/GCC driver Sricharan R
2018-02-27 14:06   ` Sricharan R
2018-02-27 14:06 ` [PATCH v8 10/15] dt-bindings: arm: Document qcom,kpss-gcc Sricharan R
2018-02-27 14:06   ` Sricharan R
2018-02-27 14:06 ` [PATCH v8 11/15] clk: qcom: Add Krait clock controller driver Sricharan R
2018-02-27 14:06   ` Sricharan R
2018-02-27 14:06 ` [PATCH v8 12/15] dt-bindings: clock: Document qcom,krait-cc Sricharan R
2018-02-27 14:06   ` Sricharan R
2018-02-27 14:07 ` [PATCH v8 13/15] clk: qcom: Add safe switch hook for krait mux clocks Sricharan R
2018-02-27 14:07   ` Sricharan R
2018-02-27 14:07 ` [PATCH v8 14/15] cpufreq: Add module to register cpufreq on Krait CPUs Sricharan R
2018-02-27 14:07   ` Sricharan R
2018-02-27 14:58   ` Gregory CLEMENT
2018-02-27 14:58     ` Gregory CLEMENT
2018-02-27 14:58     ` Gregory CLEMENT
2018-02-28  5:34     ` Sricharan R
2018-02-28  5:34       ` Sricharan R
2018-02-27 14:07 ` [PATCH v8 15/15] dt-bindings: cpufreq: Document operating-points-v2-krait-cpu Sricharan R
2018-02-27 14:07   ` Sricharan R
2018-03-05 22:19   ` Rob Herring
2018-03-05 22:19     ` Rob Herring
2018-03-06  5:15     ` Sricharan R
2018-03-06  5:15       ` Sricharan R
2018-03-01 13:28 ` [PATCH v8 00/15] Krait clocks + Krait CPUfreq Linus Walleij
2018-03-01 13:28   ` Linus Walleij
2018-03-01 13:28   ` Linus Walleij
2018-03-02 14:12   ` Sricharan R
2018-03-02 14:12     ` Sricharan R
2018-03-02 14:12     ` Sricharan R

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1519740422-3835-8-git-send-email-sricharan@codeaurora.org \
    --to=sricharan@codeaurora.org \
    --cc=andy.gross@linaro.org \
    --cc=david.brown@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=linux-soc@vger.kernel.org \
    --cc=linux@arm.linux.org.uk \
    --cc=linux@armlinux.org.uk \
    --cc=mark.rutland@arm.com \
    --cc=mturquette@baylibre.com \
    --cc=rjw@rjwysocki.net \
    --cc=robh+dt@kernel.org \
    --cc=robh@kernel.org \
    --cc=sboyd@codeaurora.org \
    --cc=viresh.kumar@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.