All of lore.kernel.org
 help / color / mirror / Atom feed
From: Oza Pawandeep <poza@codeaurora.org>
To: Bjorn Helgaas <bhelgaas@google.com>,
	Philippe Ombredanne <pombredanne@nexb.com>,
	Thomas Gleixner <tglx@linutronix.de>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Kate Stewart <kstewart@linuxfoundation.org>,
	linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org,
	Dongdong Liu <liudongdong3@huawei.com>,
	Keith Busch <keith.busch@intel.com>, Wei Zhang <wzhang@fb.com>,
	Sinan Kaya <okaya@codeaurora.org>,
	Timur Tabi <timur@codeaurora.org>
Cc: Oza Pawandeep <poza@codeaurora.org>
Subject: [PATCH v12 4/6] PCI/DPC: Unify and plumb error handling into DPC
Date: Wed, 28 Feb 2018 22:34:15 +0530	[thread overview]
Message-ID: <1519837457-3596-5-git-send-email-poza@codeaurora.org> (raw)
In-Reply-To: <1519837457-3596-1-git-send-email-poza@codeaurora.org>

Current DPC driver does not do recovery, e.g. calling end-point's driver's
callbacks, which sanitize the sw.

DPC driver implements link_reset callback, and calls pci_do_recovery().

Signed-off-by: Oza Pawandeep <poza@codeaurora.org>

diff --git a/drivers/pci/pcie/err.c b/drivers/pci/pcie/err.c
index 98aeec4..9f1c983 100644
--- a/drivers/pci/pcie/err.c
+++ b/drivers/pci/pcie/err.c
@@ -19,6 +19,7 @@
 #include <linux/aer.h>
 #include <linux/pcieport_if.h>
 #include "portdrv.h"
+#include "./../pci.h"
 
 struct aer_broadcast_data {
 	enum pci_channel_state state;
@@ -179,11 +180,12 @@ static pci_ers_result_t default_reset_link(struct pci_dev *dev)
 	return PCI_ERS_RESULT_RECOVERED;
 }
 
-static pci_ers_result_t reset_link(struct pci_dev *dev)
+static pci_ers_result_t reset_link(struct pci_dev *dev, int severity)
 {
 	struct pci_dev *udev;
 	pci_ers_result_t status;
 	struct pcie_port_service_driver *driver = NULL;
+	u32 service;
 
 	if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
 		/* Reset this port for all subordinates */
@@ -193,8 +195,12 @@ static pci_ers_result_t reset_link(struct pci_dev *dev)
 		udev = dev->bus->self;
 	}
 
-	/* Use the aer driver of the component firstly */
-	driver = pcie_port_find_service(udev, PCIE_PORT_SERVICE_AER);
+	if (severity == DPC_FATAL)
+		service = PCIE_PORT_SERVICE_DPC;
+	else
+		service = PCIE_PORT_SERVICE_AER;
+
+	driver = pcie_port_find_service(udev, service);
 
 	if (driver && driver->reset_link) {
 		status = driver->reset_link(udev);
@@ -281,7 +287,8 @@ void pcie_do_recovery(struct pci_dev *dev, int severity)
 	pci_ers_result_t status, result = PCI_ERS_RESULT_RECOVERED;
 	enum pci_channel_state state;
 
-	if (severity == AER_FATAL)
+	if ((severity == AER_FATAL) ||
+	    (severity == DPC_FATAL))
 		state = pci_channel_io_frozen;
 	else
 		state = pci_channel_io_normal;
@@ -291,10 +298,13 @@ void pcie_do_recovery(struct pci_dev *dev, int severity)
 			"error_detected",
 			report_error_detected);
 
-	if (severity == AER_FATAL) {
-		result = reset_link(dev);
+	if ((severity == AER_FATAL) ||
+	    (severity == DPC_FATAL)) {
+		result = reset_link(dev, severity);
 		if (result != PCI_ERS_RESULT_RECOVERED)
 			goto failed;
+		else if (severity == DPC_FATAL)
+			goto resume;
 	}
 
 	if (status == PCI_ERS_RESULT_CAN_RECOVER)
@@ -318,6 +328,7 @@ void pcie_do_recovery(struct pci_dev *dev, int severity)
 	if (status != PCI_ERS_RESULT_RECOVERED)
 		goto failed;
 
+resume:
 	broadcast_error_message(dev,
 				state,
 				"resume",
diff --git a/drivers/pci/pcie/pcie-dpc.c b/drivers/pci/pcie/pcie-dpc.c
index 38e40c6..517c8b4 100644
--- a/drivers/pci/pcie/pcie-dpc.c
+++ b/drivers/pci/pcie/pcie-dpc.c
@@ -13,6 +13,7 @@
 #include <linux/pcieport_if.h>
 #include "../pci.h"
 #include "aer/aerdrv.h"
+#include "portdrv.h"
 
 struct dpc_dev {
 	struct pcie_device	*dev;
@@ -45,6 +46,33 @@ struct dpc_dev {
 	"Memory Request Completion Timeout",		 /* Bit Position 18 */
 };
 
+static int find_dpc_dev_iter(struct device *device, void *data)
+{
+	struct pcie_port_service_driver *service_driver;
+	struct device **dev;
+
+	dev = (struct device **) data;
+
+	if (device->bus == &pcie_port_bus_type && device->driver) {
+		service_driver = to_service_driver(device->driver);
+		if (service_driver->service == PCIE_PORT_SERVICE_DPC) {
+			*dev = device;
+			return 1;
+		}
+	}
+
+	return 0;
+}
+
+static struct device *pci_find_dpc_dev(struct pci_dev *pdev)
+{
+	struct device *dev = NULL;
+
+	device_for_each_child(&pdev->dev, &dev, find_dpc_dev_iter);
+
+	return dev;
+}
+
 static int dpc_wait_rp_inactive(struct dpc_dev *dpc)
 {
 	unsigned long timeout = jiffies + HZ;
@@ -82,12 +110,25 @@ static void dpc_wait_link_inactive(struct dpc_dev *dpc)
 		dev_warn(dev, "Link state not disabled for DPC event\n");
 }
 
-static void dpc_work(struct work_struct *work)
+/**
+ * dpc_reset_link - reset link DPC routine
+ * @pdev: pointer to Root Port's pci_dev data structure
+ *
+ * Invoked by Port Bus driver when performing link reset at Root Port.
+ */
+static pci_ers_result_t dpc_reset_link(struct pci_dev *pdev)
 {
-	struct dpc_dev *dpc = container_of(work, struct dpc_dev, work);
-	struct pci_dev *dev, *temp, *pdev = dpc->dev->port;
 	struct pci_bus *parent = pdev->subordinate;
-	u16 cap = dpc->cap_pos, ctl;
+	struct pci_dev *dev, *temp;
+	struct dpc_dev *dpc;
+	struct pcie_device *pciedev;
+	struct device *devdpc;
+	u16 cap, ctl;
+
+	devdpc = pci_find_dpc_dev(pdev);
+	pciedev = to_pcie_device(devdpc);
+	dpc = get_service_data(pciedev);
+	cap = dpc->cap_pos;
 
 	pci_lock_rescan_remove();
 	list_for_each_entry_safe_reverse(dev, temp, &parent->devices,
@@ -104,21 +145,31 @@ static void dpc_work(struct work_struct *work)
 
 	dpc_wait_link_inactive(dpc);
 	if (dpc->rp_extensions && dpc_wait_rp_inactive(dpc))
-		return;
+		return PCI_ERS_RESULT_DISCONNECT;
 	if (dpc->rp_extensions && dpc->rp_pio_status) {
 		pci_write_config_dword(pdev, cap + PCI_EXP_DPC_RP_PIO_STATUS,
 				       dpc->rp_pio_status);
 		dpc->rp_pio_status = 0;
 	}
 
-	pci_write_config_word(pdev, cap + PCI_EXP_DPC_STATUS,
+	pci_write_config_word(pdev, dpc->cap_pos + PCI_EXP_DPC_STATUS,
 		PCI_EXP_DPC_STATUS_TRIGGER | PCI_EXP_DPC_STATUS_INTERRUPT);
 
 	pci_read_config_word(pdev, cap + PCI_EXP_DPC_CTL, &ctl);
 	pci_write_config_word(pdev, cap + PCI_EXP_DPC_CTL,
 			      ctl | PCI_EXP_DPC_CTL_INT_EN);
+
+	return PCI_ERS_RESULT_RECOVERED;
 }
 
+static void dpc_work(struct work_struct *work)
+{
+	struct dpc_dev *dpc = container_of(work, struct dpc_dev, work);
+	struct pci_dev *pdev = dpc->dev->port;
+
+	/* From DPC point of view error is always FATAL. */
+	pcie_do_recovery(pdev, DPC_FATAL);
+}
 static void dpc_process_rp_pio_error(struct dpc_dev *dpc)
 {
 	struct device *dev = &dpc->dev->device;
@@ -297,6 +348,7 @@ static void dpc_remove(struct pcie_device *dev)
 	.service	= PCIE_PORT_SERVICE_DPC,
 	.probe		= dpc_probe,
 	.remove		= dpc_remove,
+	.reset_link     = dpc_reset_link,
 };
 
 static int __init dpc_service_init(void)
diff --git a/include/linux/aer.h b/include/linux/aer.h
index 8f87bbe..9cfd0b8 100644
--- a/include/linux/aer.h
+++ b/include/linux/aer.h
@@ -15,6 +15,8 @@
 #define AER_FATAL			1
 #define AER_CORRECTABLE			2
 
+#define DPC_FATAL			4
+
 struct pci_dev;
 
 struct aer_header_log_regs {
-- 
Qualcomm Datacenter Technologies, Inc. as an affiliate of Qualcomm Technologies, Inc.,
a Qualcomm Technologies, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project.

  parent reply	other threads:[~2018-02-28 17:04 UTC|newest]

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-02-28 17:04 [PATCH v12 0/6] Address error and recovery for AER and DPC Oza Pawandeep
2018-02-28 17:04 ` [PATCH v12 1/6] PCI/AER: Rename error recovery to generic PCI naming Oza Pawandeep
2018-02-28 17:04 ` [PATCH v12 2/6] PCI/AER: Factor out error reporting from AER Oza Pawandeep
2018-02-28 17:04 ` [PATCH v12 3/6] PCI/PORTDRV: Implement generic find service Oza Pawandeep
2018-03-06 14:02   ` Sinan Kaya
2018-03-08  7:56     ` poza
2018-02-28 17:04 ` Oza Pawandeep [this message]
2018-02-28 17:04 ` [PATCH v12 5/6] PCI: Unify wait for link active into generic PCI Oza Pawandeep
2018-02-28 17:04 ` [PATCH v12 6/6] PCI/DPC: Enumerate the devices after DPC trigger event Oza Pawandeep
2018-03-11 22:03 ` [PATCH v12 0/6] Address error and recovery for AER and DPC Bjorn Helgaas
2018-03-12  3:03   ` Sinan Kaya
2018-03-12 14:25     ` Keith Busch
2018-03-12 14:46       ` poza
2018-03-12 14:58         ` Keith Busch
2018-03-12 15:34           ` poza
2018-03-12 17:33             ` Keith Busch
2018-03-12 17:41               ` Sinan Kaya
2018-03-12 17:56                 ` Keith Busch
2018-03-12 19:47       ` Bjorn Helgaas
2018-03-12 23:26         ` Keith Busch
2018-03-13  3:47           ` Sinan Kaya
2018-03-14 20:50             ` Keith Busch
2018-03-14 21:00               ` Sinan Kaya
2018-05-08 19:25           ` Bjorn Helgaas
2018-03-12 14:01   ` poza

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1519837457-3596-5-git-send-email-poza@codeaurora.org \
    --to=poza@codeaurora.org \
    --cc=bhelgaas@google.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=keith.busch@intel.com \
    --cc=kstewart@linuxfoundation.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=liudongdong3@huawei.com \
    --cc=okaya@codeaurora.org \
    --cc=pombredanne@nexb.com \
    --cc=tglx@linutronix.de \
    --cc=timur@codeaurora.org \
    --cc=wzhang@fb.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.